Acer Aspire 5335 Aspire 5335 / 5735 / 5735Z Service Guide - Page 110

Check the Power Adapter, Pin 2: 0V, Ground - power cord

Page 110 highlights

Check the Power Adapter Unplug the power adapter cable from the computer and measure the output voltage at the plug of the power adapter cable. See the following figure Pin 1: +19 to +20.5V Pin 2: 0V, Ground 1. If the voltage is not correct, replace the power adapter. 2. If the voltage is within the range, do the following: q Replace the System board. q If the problem is not corrected, see "Undetermined Problems" on page 116. q If the voltage is not correct, go to the next step. NOTE: An audible noise from the power adapter does not always indicate a defect. 3. If the power-on indicator does not light up, check the power cord of the power adapter for correct continuity and installation. 4. If the operational charge does not work, see "Check the Battery Pack" on page 101. 100 Chapter 4

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.