Acer Aspire 7735Z Acer Aspire 7535 Notebook Service Guide - Page 40

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter System Time System Date System Memory Total Memory Extended Memory VGA Memory Quiet Boot Network Boot F12 Boot Menu D2D Recovery SATA Mode Description Sets the system time. The hours are displayed with 24-hour format. Sets the system date. This field reports the memory size of the system. Memory size is fixed to 640MB This field reports the total memory size of the system. For Aspire 8530 Series only. This field reports the memory size of the extended memory in the system. Extended Memory size=Total memory size-1MB Shows the VGA memory size. Determines if Customer Logo will be displayed or not; shows Summary Screen is disabled or enabled. Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled. Enables, disables the system boot from LAN (remote server). Enables, disables Boot Menu during POST. Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults. Control the mode in which the SATA controller should operate. Format/Option Format: HH:MM:SS (hour:minute:second) System Time Format MM/DD/YYYY (month/day/ year) System Date Option: Enabled or Disabled Option: Enabled or Disabled Option: Disabled or Enabled Option: Enabled or Disabled Option: AHCI or IDE NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases. 32 Chapter 2