Acer Aspire 9400 Aspire 7100/9400 and TravelMate 5100/5600 Service Guide - Page 80

Error Message List, No beep Error Messages, FRU/Action in Sequence

Page 80 highlights

Error Message List No beep Error Messages FRU/Action in Sequence Power-on indicator turns off and LCD is blank. Power source (battery pack and power adapter.) See "Power System Check" on page 69 Ensure every connector is connected tightly and correctly. Reconnect the DIMM. Main board. Power-on indicator turns on and LCD is blank. Power source (battery pack and power adapter.) See "Power System Check" on page 69 Reconnect the LCD connector Hard disk drive LCD cable LCD inverter LCD Main board Power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. Reconnect the LCD connectors. LCD cable LCD inverter LCD Main board Power-on indicator turns on and a blinking cursor Ensure every connector is connected tightly and correctly. shown on LCD during POST. Main board Chapter 4 73

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.