Acer Aspire E700 Aspire E700 Service Guide - Page 49

Soft-Off by PWR-BTTN Under ACPI (Advanced Configuration and Power Management Interface) you can create a software power down. In a software power down, the system can be resumed by Wake Up Alarms. This item lets you install a software power down that is controlled by the power button on your system. If the item is set for Instant-Off, then the power button causes a software power down. If the item is set for Delay four Sec., then you have to hold the power button down for four seconds to cause a software power down. Energy Lake Function This item enables or disables the Energy Lake Function. Wake Up On LAN When it is Enabled, you can remotely wake up a PC in Soft-Off condition via a LAN card that supports the wake up function. Power On by Ring An input signal on the serial Ring indicator (RI) line (in other words, an incoming call on the modem) awakens the system from soft off state. USB KB/MS Wake-up S1/S3/S4 This option allows the activity of the USB devices (keyboard and mouse) to wake up the system from S1/S3/S4 status. PS2 KB/MS Wake-up S3 This option allows the activity of the PS2 keyboard and mouse to wake up the system from S3 status. Resume by Alarm When it is Enabled, additional fields become available and you can set the date, hour, minute and second to turn on your system. When it is set for zero in the column of date, the alarm will power on your system every day at the specified time. 41 Chapter 2