Acer Aspire G5900 Service Guide - Page 99

Step 6:Key the name in "Volume Name" and select "RAID 1" in RAID Level. Picture10 Step 7:Select minimum HDD as "Source Hard Drive". Step 8:Select Menber Hard Drive(s). Step 9:Specify Volume Size then press "next". Step 10:Press "next" to finish setup and start create RAID1. Step 11:It may takes half and hours to create RAID1.After create completely,it will ask to reboot to finish create RAID1. 2-3:Create a"RAID Ready" System into" RAID 5" with three Hard Drives by'Create RAID Volume from Existing HDD Drive '. Step 1:Install WIN7 OS with one SATA HDD. Step 2:Shut down the system,then add other two serial ATA hard drives in the system. Step 3:Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4:Click on the by'Create RAID Volume from Existing HDD Drive ' to create a RAID volume. Step 5:Click "Next" at create a RAID volume window. Step 6:Key the name in "Volume Name" and select "RAID 1" in RAID Level. 91 Chapter 7