Acer Aspire M3802 Service Guide - Page 102

Step 7:Select two HDDs as "Source Hard Drive". Picture15 Step 8:At least select two HDD as Menber Hard Drive(s). Step 9:Specify Volume Size then press "next". Step 10:Press "next" to finish setup and start create RAID 10. Step 11:It may takes half and hours to create RAID 10.After create completely,it will ask to reboot to finish create RAID10. 2-5:Create a"RAID Ready" System into" RAID 0" with two Hard Drives by 'Create RAID Volume '. Step 1:Install WIN7 OS with one SATA HDD. Step 2:Shut down the system,then add another two serial ATA hard drives in the system. Step 3:Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4:Click on the by'Create RAID Volume' to create a RAID volume. Picture16 96 Chapter 7