Acer ED273A User Manual
Acer ED273A Manual
 |
View all Acer ED273A manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer ED273A manual content summary:
- Acer ED273A | User Manual - Page 1
Acer LCD Monitor User's Guide - Acer ED273A | User Manual - Page 2
. All Rights Reserved. Acer LCD Monitor User's Guide Original Issue: 06/2017 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary - Acer ED273A | User Manual - Page 3
problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the power switch and then turn it on again to make sure the flicker instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions - Acer ED273A | User Manual - Page 4
power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not - Acer ED273A | User Manual - Page 5
, UL listed/CSA certified, type SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.5 meters (15 feet) maximum length. Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all - Acer ED273A | User Manual - Page 6
performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those controls priorities in minimizing the burden placed on the environment. We at Acer are very conscious of the environmental effects of our business and - Acer ED273A | User Manual - Page 7
Visit www.acer-group.com for further information on the features and benefits of our other products. Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For - Acer ED273A | User Manual - Page 8
• pain, swelling or throbbing • stiffness or tightness • coldness or weakness If you have these symptoms, or any other recurring or persistent discomfort and/or pain related to computer use, consult a physician immediately and inform your company's health and safety department. The following section - Acer ED273A | User Manual - Page 9
and productive: • Take short breaks regularly and often. • Perform some stretching exercises. • Breathe fresh air as often as possible. • Exercise regularly and maintain a healthy body. Acer monitor is purposed for video and visual display of information obtained from electronic devices. ix - Acer ED273A | User Manual - Page 10
Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it ED273 ED273 YY YYYY We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as - Acer ED273A | User Manual - Page 11
for this declaration: Product: Model Number: SKU Number: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: LCD Monitor ED273 ED273 xxxxxx; xxxxxx ("x" = 0~9, a ~ z, or A ~ Z) Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110 - Acer ED273A | User Manual - Page 12
iv Product servicing v Potentially explosive environments vi Additional safety information vi IT Equipment Recycling Information vi Disposal instructions vii LCD timing table 7 Installation 8 Users controls 9 Adjusting the OSD settings 10 The Function page 12 Trouble shooting 18 - Acer ED273A | User Manual - Page 13
unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide Adapter DVI cable (Optional) HDMI cable (Optional) AC Power cord DP cable (Optional) 1 - Acer ED273A | User Manual - Page 14
) 3. Turn to lock clockwise by turning the screw using the integrated tab or a suitable coin. FreeSync (HDMI'3 only): It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low - Acer ED273A | User Manual - Page 15
English 4DSFFOQPTJUJPOBEKVTUNFOU To optimize the viewving position, you can adjust the monitor tilt by using both of your hands to hold the edges of the monitor as shown below. The monitor can be adjusted to 15 degrees up or 5 degrees down. 3 - Acer ED273A | User Manual - Page 16
by the amber-colored power LED. Mode On Power saving LED light Blue Flicker The power saving mode will be kept until a control signal has been Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC - Acer ED273A | User Manual - Page 17
Connector pin assignment English 19-Pin Color Display Signal Cable* PIN Meaning 1. TMDS Data2+ 2. TMDS Data2 Shield 3. TMDS Data2- 4. TMDS Data1+ 5. TMDS Data1 Shield 6. TMDS Data1- 7. TMDS Data0+ 8. TMDS Data0 Shield 9. TMDS Data0- * only for certain models 20-Pin Color - Acer ED273A | User Manual - Page 18
English 24-Pin Color Display Signal Cable PIN Meaning PIN Meaning 1. TMDS Data2- 13. NC 2. TMDS Data2+ 14. +5V Power 3. TMDS Data 2/4 Shield 15. Logic Ground 4. NC 16. Hot Plug Detect 5. NC 17. TMDS Data0- 6. DDC Clock 18. TMDS Data0+ 7. DDC Data 19. TMDS Data 0/5 - Acer ED273A | User Manual - Page 19
60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 75 Hz 120 Hz 144 Hz *Only for DVI-Dual link and DP support 144Hz,HDMI support 120Hz 7 - Acer ED273A | User Manual - Page 20
English *OTUBMMBUJPO To install the monitor on your host system, please follow the steps below: Steps &RQQHFWLQJ - Acer ED273A | User Manual - Page 21
switch power on. In the normal display, anytime to Press more than 5 seconds switch to turn off the power. b. Blue indicates power on. Blue flicker indicates standby/power saving mode. No light display indicates Power off. c. Press to any directions switch key to display First Menu. Press again to - Acer ED273A | User Manual - Page 22
English Using the Shortcut Menu Note: The following content is for general reference only. Actual product specifications may vary. The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture - Acer ED273A | User Manual - Page 23
English Selecting the input Open the Input control and select HDMI1, HDMI2,DP, or Auto Source. When you are done, press the joystick to exit current page and store. The Function page Open the Function page to adjust the functions, settings which you want using the arrows. When you are done, toggle - Acer ED273A | User Manual - Page 24
English 5. Brightness: Adjust the brightness from 0 to 100 Note: Adjusts the balance between light and dark shades. 6. Contrast: Adjust the contrast from 0 to 100 Note: Sets the degree of difference between light and dark areas. 7. Black Boost: Adjust the black level from 0 to 10. Enhances - Acer ED273A | User Manual - Page 25
English value for Windows). 5. Color temperature: Default is warm. You can choose Cool, Normal, Warm, Bluelight or User. 6. Modes: further open the modes menu selection. 7. sRGB: Default is off. You can turn sRGB on or off to better color match with peripheral devices, such as printers and digital - Acer ED273A | User Manual - Page 26
English Note: 1.If freesync is"ON",then the Over Drive selection is set to "Normal" automatically 2.If Freesync is "OFF",then the user can set Over Drive to either one of the three settings including:(a)Extreme (b) Normal (c)Off 6. Aim point: Show an Aim point on the screen for shooting games. - Acer ED273A | User Manual - Page 27
English 3. Toggle to the left or right to adjust the sliding scales. 4. Input: Select the source from HDMI1,DP,HDMI2 5. Auto Source:Automatically searches for available input sources. 6. Wide mode: You can select which screen aspect you are using. The options are Full, Aspect. 7. Hotkey Assigment: - Acer ED273A | User Manual - Page 28
Save Setting to...(User mode only) 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. 3. Save Setting to some mode: - Acer ED273A | User Manual - Page 29
settings in the future when you turn on these mode. Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. HDMI/DP/DVI Mode (Optional) Problem No picture visible LED status Blue Off Remedy Using the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
Acer LCD Monitor
User’s Guide