Acer Extensa 5630ZG Service Guide - Page 119
Error Message List, No beep Error Messages, FRU/Action in Sequence, Reconnect the DIMM.
View all Acer Extensa 5630ZG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Error Message List No beep Error Messages FRU/Action in Sequence No beep, power-on indicator turns off and LCD is blank. Power source (battery pack and power adapter). See "Power System Check" on page 103.. Ensure every connector is connected tightly and correctly. Reconnect the DIMM. LED board. System board. No beep, power-on indicator turns on and LCD is blank. Power source (battery pack and power adapter). See "Power System Check" on page 103.. Reconnect the LCD connector Hard disk drive LCD inverter ID LCD cable LCD Inverter LCD System board No beep, power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. Reconnect the LCD connectors. LCD inverter ID LCD cable LCD inverter LCD System board No beep, power-on indicator turns on and a Ensure every connector is connected tightly and correctly. blinking cursor shown on LCD during POST. System board No beep during POST but system runs correctly. Speaker System board Chapter 4 113