Acer H7550BDz User Manual

Acer H7550BDz Manual

Acer H7550BDz manual content summary:

  • Acer H7550BDz | User Manual - Page 1
    Acer Projector H7550ST/E155S/HE-815ST/H1P1403/ H7550STz/H7550BD/E155D/HE-815J/ H1P1406/H7550BDz Series User's Guide
  • Acer H7550BDz | User Manual - Page 2
    . Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Original Issue: 11/2014 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual
  • Acer H7550BDz | User Manual - Page 3
    document for future reference. Follow all warnings and instructions marked on the product. Turning the product off power outlet. • Unplug the power cord before removing the power supply unit from the projector. • If the system has multiple sources of power, disconnect power from the system by
  • Acer H7550BDz | User Manual - Page 4
    surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp. Using electrical power • This product should be operated from the type of power indicated on the marking label. If you are not sure of
  • Acer H7550BDz | User Manual - Page 5
    , indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. • Turn on the projector first and then signal sources.
  • Acer H7550BDz | User Manual - Page 6
    professional service personnel. • Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and
  • Acer H7550BDz | User Manual - Page 7
    hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash acer-group.com/public/ Sustainability/index.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp
  • Acer H7550BDz | User Manual - Page 8
    electric shock. • When changing the lamp, please allow the projector to cool down, and follow all changing instructions. • This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. • Reset the "Lamp Hour Reset" function from the Onscreen
  • Acer H7550BDz | User Manual - Page 9
    7 Getting Started 8 Connecting the Projector 8 Turning the Projector On/Off 9 Turning On the Projector 9 Turning Off the Projector 10 Adjusting the Projected Image 11 Adjusting the Height of the Projected Image 11 How to Optimize Image Size and Distance 12 How to Get a Preferred
  • Acer H7550BDz | User Manual - Page 10
    Appendices 29 Troubleshooting 29 LED & Alarm Definition Listing 33 Using the inner connector(s) 34 Replacing the Lamp 35 Ceiling Mount Installation 36 Specifications 39 Compatibility Modes 41 Regulations and safety notices 45
  • Acer H7550BDz | User Manual - Page 11
    product is a single-chip DLP® projector, including the following outstanding features: • DLP® technology • Native 1920 x 1080 1080p resolution, Auto/Full/4:3/16:9/L.Box aspect ratio supported • Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D supported and Nvidia 3DTV Play Ready
  • Acer H7550BDz | User Manual - Page 12
    sure you have them all. Contact your dealer immediately if any thing is missing. English Projector Power cord VGA cable Security card User's guide (CD-ROM) Remote control Quick start guide Battery x 2 Carrying case (Optional) WirelessHD dongle kit (Optional) 3D glasses kit (Optional)
  • Acer H7550BDz | User Manual - Page 13
    English Projector Overview Projector Outlook Front/upper side 1 2 4 1 2 5 6 2 3 7 3 (H7550BD/E155D/HE-815J/ 8 H1P1406/H7550BDz) # Description 1 Control panel 2 Speaker 3 Elevator button 4 Power key and Power indicator LED (H7550ST/E155S/HE-815ST/ H1P1403/H7550STz) # Description
  • Acer H7550BDz | User Manual - Page 14
    4 English Control Panel 1 7 2 3 8 4 9 5 6 10 3 # Function Description 1 LAMP Lamp Indicator LED. 2 POWER indicator Refer to the "Turning the Projector On/Off" section. LED 3 Keystone Adjusts image distortion caused by tilting projection (±40 degrees). 4 RESYNC Automatically
  • Acer H7550BDz | User Manual - Page 15
    Description Refer to the "Turning the Projector On/Off" section. (No function) Zooms the projector display in or out. Chooses a connection supports analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and YCbCr (480i/576i). 8 COMPONENT To change source to Component video. This connector supports YPbPr
  • Acer H7550BDz | User Manual - Page 16
    only available when connected to a computer via a USB cable. 17 VIDEO To change source to composite video. 18 RATIO Chooses an aspect ratio. 19 WIRELESS; LAN/WiFi (No function) 20 Rewind (No function) Play/Pause Stop Fast-forward 21 SD/USB A (No function) 22 USB B (No function) 23 3D
  • Acer H7550BDz | User Manual - Page 17
    7 English MHL Feature Introduction When your smart device is connected to the projector, you can use some buttons on the remote control to control your smart device. Press "MODE" for one second to enter or leave the MHL
  • Acer H7550BDz | User Manual - Page 18
    English 8 Getting Started Connecting the Projector VGA RS232 Smartphone/ tablet Display DVD player, Set-top box, HDTV receiver Video/S-Video Output 3 Speakers video cable 4 Audio cable 1 2 2 1 # Description 7 USB cable 8 3 RCA component cable 9 HDMI (MHL) cable 10 WirelessHD dongle
  • Acer H7550BDz | User Manual - Page 19
    11 Wireless dongle Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note control to switch between inputs. 1 & 2 (H7550BD/E155D/HE-815J/ H1P1406/H7550BDz) (H7550ST/E155S/HE-815ST/ H1P1403/H7550STz)
  • Acer H7550BDz | User Manual - Page 20
    indicator will turn solid red. Contact your local dealer or service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator
  • Acer H7550BDz | User Manual - Page 21
    English 11 Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with two elevator feet for adjusting the image height. To raise the image: 1 Press the elevator button. 2 Raise the image to the desired
  • Acer H7550BDz | User Manual - Page 22
    quality is possible for image sizes between 178" and 196". Note: Remind as below figure, the space of 251 cm height is required when the projector is located at 3 m distance. Max screen size Min screen size 196" 178" Height: 228 cm Height: 251 cm From base to top of image 3 m Desired
  • Acer H7550BDz | User Manual - Page 23
    13 • H7550BD/E155D/HE-815J/H1P1406/H7550BDz If the projector is 3 m from the screen, good image quality is possible for image sizes between 90" and 118". English Note: Remind as below figure, the space of 154 cm height is required when the projector is located at 3 m distance. Max screen size Min
  • Acer H7550BDz | User Manual - Page 24
    H7550STz To obtain an image size of 70", set the projector at a distance between 1.1 m and 1.2 m from the screen and adjust the zoom level accordingly. 70" Desired image size 1.1 m 1.2 m Desired distance Height: 89 cm From base to top of image Desired Image Size Diagonal (inch) <
  • Acer H7550BDz | User Manual - Page 25
    15 • H7550BD/E155D/HE-815J/H1P1406/H7550BDz To obtain an image size of 70" set the projector at a distance between 1.8 m and 2.3 m from the screen and adjust the zoom level accordingly. English 70" Desired image size 1.8 m 2.3 m Desired distance Height: 92 cm From base to top of image Desired
  • Acer H7550BDz | User Manual - Page 26
    control to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more. Note: 5 Press "MENU" anytime to exit the menu and return to the Acer welcome screen.
  • Acer H7550BDz | User Manual - Page 27
    return to the main menu. • To exit the OSD menu, press "MENU" on the control panel or remote control again. It will close and the projector will automatically save the new settings. Main menu Submenu Setting Note: Some of the following OSD settings may not be available. Please refer to the
  • Acer H7550BDz | User Manual - Page 28
    English 18 Color Display Mode Wall Color Brightness Contrast Saturation Tint There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Standard: For common environment. • Movie: For brighter and general movie/video/photo playing. • Dark Cinema:
  • Acer H7550BDz | User Manual - Page 29
    color temperatures, the screen looks warmer. If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting each analog source. Note: "Saturation" and "Tint" functions are not supported under computer mode.
  • Acer H7550BDz | User Manual - Page 30
    projection location of image. • Desktop • Ceiling: Turns the image upside down for ceiling- mounted projection. Use this function to choose your projection (±40 degrees). Manually adjusts image distortion caused by tilting projection (±40 degrees). Manual Keystone Sharpness H. Position
  • Acer H7550BDz | User Manual - Page 31
    . Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video mode. Note: "HDMI Color Range" and "HDMI Scan Info" are you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use the memorized picture from the "Screen
  • Acer H7550BDz | User Manual - Page 32
    use as the startup screen, follow the instructions below. Notice Before proceeding with the following • Change the "Startup Screen" from the default setting "Acer" to "User". • Select "Screen Capture" to customize Selecting "On" enables the function. The projector can output a VGA signal when it is
  • Acer H7550BDz | User Manual - Page 33
    to "On", you can set timeout function. • Press to select timeout duration. • The range is from 10 to 990 minutes. • When time is up, the projector will request you to enter the password again. • The factory default setting of "Timeout (Min.)" is "Off". • Once the security function is enabled, the
  • Acer H7550BDz | User Manual - Page 34
    " which is printed on the Security Card that came with your projector. This unique password will be accepted by the projector no matter what the administrator password is. • If the Security Card is lost, please contact your local Acer service center. Lock User Startup Screen This function is set to
  • Acer H7550BDz | User Manual - Page 35
    English 25 Management ECO Mode High Altitude Turn Off Mode Choose "On" to dim the projector lamp, which will also lower the power consumption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode. Choose "On" to turn on the High Altitude mode. When this function is
  • Acer H7550BDz | User Manual - Page 36
    Search: Press to search for available devices. Select a device in the list of found devices. The projector will automatically try to connect to the last connected device the next time you enable the Bluetooth function. • Choose "On" to turn mute on. • Choose "Off" to turn mute off. Select this
  • Acer H7550BDz | User Manual - Page 37
    English 3D 3D 2D to 3D 27 Selects "On" to enable the 3D function supported by DLP 3D technology. • On: Select this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI...) graphics card and HQFS format file or DVD with corresponding SW player. • Off: Turns off the 3D mode. • 2D
  • Acer H7550BDz | User Manual - Page 38
    @50/60Hz) Top-and-Bottom (720p@50/60Hz, [email protected]/24Hz, 1080p@50/60Hz) It needs correct settings on graphics card 3D application program for correct 3D display. The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these players on
  • Acer H7550BDz | User Manual - Page 39
    29 Appendices English Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears • Make
  • Acer H7550BDz | User Manual - Page 40
    way to be reactivated. Refer to your computer's manual for detailed information. • If you are using projector lens. • Make sure the projection screen is within the required distance: H7550ST/E155S/HE-815ST/H1P1403/H7550STz: 3.0 to 5.9 feet (0.9 to 1.8 meters) H7550BD/E155D/HE-815J/H1P1406/H7550BDz
  • Acer H7550BDz | User Manual - Page 41
    > "Auto Keystone" or "Image" > "Manual Keystone" to make adjustments. 11 Image is reversed • Select "Image" > "Projection Mode", "Image" > "Projection Location" on the OSD and adjust the projection direction. Problems with the Projector # Condition Solution 1 The projector stops responding If
  • Acer H7550BDz | User Manual - Page 42
    32 English OSD Messages # Condition 1 Message Message Reminder Fan Fail - the system fan is not working. Fan Fail. Lamp will automatically turn off soon. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used.
  • Acer H7550BDz | User Manual - Page 43
    33 LED & Alarm Definition Listing LED Messages English Message Standby (Power cord plugged in) Power on Lamp retry Turning off (Cooling state) Turning off (Cooling completed) Error (Thermal failure) Error (Fan lock failure) Power LED Red Blue V -- --- Quick flashing V V Quick flashing -- --
  • Acer H7550BDz | User Manual - Page 44
    beside the focus/zoom ring. 4 Put the bottom of the WirelessHD dongle (optional accessory) or other HDMI/MHL dongle into the projector first (Illustration #3) and then insert the WirelessHD dongle or other HDMI/MHL dongle into the HDMI (MHL) connector. (Illustration #4) 5 A micro USB cable is also
  • Acer H7550BDz | User Manual - Page 45
    projector. Lift the handle so that it stands up. Pull out the lamp module by force (Illustration #4). To replace the lamp module, use a new lamp and reverse the above steps (Illustrations # 5 - # 8 ). Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb
  • Acer H7550BDz | User Manual - Page 46
    English 8.4 mm 2 0 36 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. mm mm13 m4m9.9 130 mm Note: Screws are not included.
  • Acer H7550BDz | User Manual - Page 47
    English 37 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B Large Washer Smaller Washer Projector Bracket Supports projector and allows for adjustments Spacer - For heat dissipation Note: It is recommended that you
  • Acer H7550BDz | User Manual - Page 48
    English 38 5 Adjust the angle and positioning as necessary. Tightening Screw Allen Key 30 Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 4 mm diameter screws are enclosed in the screw pack. Screw Type B Diameter (mm)
  • Acer H7550BDz | User Manual - Page 49
    distance with clear focus Throw ratio Horizontal scan rate Vertical refresh scan rate Keystone correction Digital zoom Audio Weight Dimensions (W x D x H) Power supply Power consumption (typical) Operating temperature DLP™ Native: 1080p (1920 x 1080) Maximum: WUXGA (1920 x 1200) (supports
  • Acer H7550BDz | User Manual - Page 50
    x 1 • VGA cable x 1 • Remote control x 1 • Battery x 2 (for the remote control) • User's guide (CD-ROM) x 1 • Quick start guide x 1 • Security card x 1 • Composite video cable x 1 • Carrying case x 1 • WirelessHD dongle kit x 1 • 3D glasses kit x 1 * Design and specifications are subject to change
  • Acer H7550BDz | User Manual - Page 51
    Compatibility Modes 1 VGA Analog - PC Signal Mode Resolution VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 SXGA 1152 x 864 1280 x 1024 QuadVGA SXGA+ UXGA PowerBook G4 1280 x 960 1280 x 960 1400 x 1050 1600 x 1200 640 x 480 640 x 480 800 x 600 1024 x 768 1024 x 768 1152 x 870 V.Frequency [
  • Acer H7550BDz | User Manual - Page 52
    42 English 1280 x 768 1280 x 768 1280 x 768 1280 x 720 WXGA 1280 x 800 1280 x 800 - RB 1440 x 900 1680 x 1050 1366 x 768 1920 x 1080-RB 1920 x 1080-EIA 1024 x 600 1920 x 1200-RB 2 HDMI - PC Signal Mode Resolution VGA_60 VGA_72 VGA_75 VGA_85 VGA_120 SVGA_56 SVGA_60 SVGA_72 SVGA_75 SVGA_85
  • Acer H7550BDz | User Manual - Page 53
    49.702 101.563 55.935 65.29 47.712 66.587 67.5 37.5 74.038 Mode 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p Resolution 720 x 480 (1440 x 480) 720 x 480 720 x 576 (1440 x 576) 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080
  • Acer H7550BDz | User Manual - Page 54
    x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 5 YPbPr Signal Mode 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p Resolution 720 x 480 720 x 480 720 x 576 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080
  • Acer H7550BDz | User Manual - Page 55
    45 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
  • Acer H7550BDz | User Manual - Page 56
    this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only
  • Acer H7550BDz | User Manual - Page 57
    English English 47 List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the
  • Acer H7550BDz | User Manual - Page 58
    -02-939-921, Fax: +39-02 9399-2913 www.acer.it Declare under our own responsibility that the product: Product: DLP Projector Trade Name: Acer Model Number: H7550ST/E155S/HE-815ST/H1P1403/H7550STz/ H7550BD/E155D/HE-815J/H1P1406/H7550BDz series To which this declaration refers conforms to the
  • Acer H7550BDz | User Manual - Page 59
    local Manufacturer /Importer is responsible for this declaration: Product: Model Number: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: DLP Projector H1P1403/H1P1406 series Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59

Acer Projector
H7550ST/E155S/HE-815ST/H1P1403/
H7550STz/H7550BD/E155D/HE-815J/
H1P1406/H7550BDz
Series User's Guide