Acer PD100 PD100 and PD120 Service Guide - Page 25

Chapter 3 Mechanical Disassembly & Reassembly This section provides disassembly & Reassembly procedures for PD100 Micro Portable SVGA DMD Projector. Before you begin any of these procedures, be sure to turn off the power, computer system, and other attached devices; then disconnect the power cable from the electrical outlet. Moreover, when you disassemble the projector, be sure to put the screws in a safe place and separate them according to their category. Equipment Needed Item Photo Item Photo Philips (+) : 107 Philips (+) : 102 Screw Bit Hex Screw : 5mm Tweezers Screw Bit General Information Before You Begin Before proceeding with the disassembly procedure, make sure that you do the following procedures: 1. Turn off the power of the system and all the peripherals. 2. Unplug the AC adapter and all power and signal cables from the system. 3. Anti-static wrist strap. 19 Chapter 3