Acer S2W 3300U Service Manual - Page 47

(2) Remove lamp A. Remove scan cover. B. Remove case assy up section. C. Push the flexible ribs by using a tool to open case assy up and low. D. Move the scan module to the original position. E. Remove the lamp and replace a new one Fig.7-7 ¬ Pull the lamp connector from the inverter board. - Push the clips on the back of module and take the lamp cable away. ®,¯Remove the lamp from the two ends carefully so as to avoiding the lamp being crushed. Fig.7-8 Lamp Cable CCD Board Invert Board Lamp Figure7-7