Acer TravelMate 210 TravelMate 210 Service Guide - Page 84

No-Beep Symptoms, Error Messages List, Symptom / Error, Action in Sequence - cmos batterie

Page 84 highlights

Error Messages List Error Messages Memory size found by POST differed from CMOS Diskette drive A error Incorrect Drive A type - run SETUP System cache error - Cache disabled CPU ID DMA Test Failed Software NMI Failed Fail-Safe Timer NMI Failed Device Address Conflict Allocation Error for device Failing Bits: nnnn Fixed Disk n Invalid System Configuration Data I/O device IRQ conflict Operating system not found No-Beep Symptoms Symptom / Error No beep, power-on indicator turns off and LCD is blank. Action in Sequence Run "Load Default Settings" in BIOS Setup Utility. DIMM System board Check that the drive is defined with the proper diskette type in BIOS Setup Utility. Diskette Drive Check. Check that the drive is defined with the proper diskette type in BIOS Setup Utility Diskette Drive Check. System board System board DIMM System board DIMM System board DIMM System board Run "Load Default Settings" in BIOS Setup Utility. RTC battery System board Run "Load Default Settings" in BIOS Setup Utility. RTC battery System board DIMM BIOS ROM System board None BIOS ROM System board Run "Load Default Settings" in BIOS Setup Utility. RTC battery System board Enter Setup and see if fixed disk and drive A are properly identified. Diskette drive Hard disk drive System board Action in Sequence Power source (battery pack and power adapter). Power System Check. Ensure every connector is connected tightly and correctly. Reconnect the DIMM. System board. 78 Chapter 4

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.