Acer TravelMate 260 TravelMate 220 Service Guide - Page 35

Power Management Power Saving Mode Standby Mode Enter Standby Mode when 1.Standby/Hibernation hot-key is pressed and system is not ready to enter Hibernation mode. 2.System standby/ Hibernation timer expires and system is not ready to enter Hibernation mode. Hibernation Mode Enter Hibernation Mode (suspend to HDD) when 1.Hibernation hot-key is pressed and system is ready to enter Hibernation mode 2.System Hibernation timer expires and system is ready to enter Hibernation mode. Display Standby Mode Keyboard, built-in touchpad, and an external PS/2 pointing device are idle for a specifie period. Hard Disk Standby Mode Hard disk is idle within a specified period of time. Phenomenon ! The buzzer beeps ! The Sleep indicator lights u ! All power shuts off ! The display shuts off ! Hard disk drive is in standby mode. (spindle turned-off) Environmental Requirements Item Temperature Operating Non-operating Humidity Operating Non-operating Vibration Operating (unpacked) Non-operating (unpacked) Non-operating (packed) Specification +5~+35 °C -20~+60 °C 20% to 85% RH, non-condensing 20% to 90% RH, non-condensing 5~25.6Hz: 0.38mm (peak to peak) 25.6~250Hz: 0.5G 5~27.1Hz: 0.6G 27.1~50Hz: 0.04mm (peak to peak) 50~500Hz: 2.0G 5~62.6Hz: 0.51mm (peak to peak) 62.6~500Hz: 4G Mechanical Specification Dimensions Weight I/O Ports Item Specification 311(W) x 260.5(D) x 36.7(H)mm 6.2 lbs for 14.1" TFT model and CD-ROM One type II or one type III PCMCIA (PC Card) port, one RJ-11 port, one DC-in port, one parallel port, one serial port, one PS/2 keyboard/mouse port, two USB port, one line-in jack, one speaker/headphone-out jack, one microphone-in jack, one external display port 26 Chapter 1