Acer TravelMate 260 TravelMate 220 Service Guide - Page 94

Error Message List No beep Error Messages FRU/Action in Sequence No beep, power-on indicator turns off and LCD is Power source (battery pack and power adapter). See "Power blank. System Check" on page 80. Ensure every connector is connected tightly and correctly. Reconnect the DIMM. LED board. System board. No beep, power-on indicator turns on and LCD is Power source (battery pack and power adapter). See "Power blank. System Check" on page 80. Reconnect the LCD connector Hard disk drive LCD inverter I LCD cabl LCD Inverter LCD System board No beep, power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. Reconnect the LCD connectors. LCD inverter I LCD cabl LCD inverter LCD System board No beep, power-on indicator turns on and a blinking cursor shown on LCD during POST. Ensure every connector is connected tightly and correctly. System board No beep during POST but system runs correctly. Speake System board Error Beep List Code 00h F1h F2h D1h Beeps Two long beeps, one short beep, then one long beep. One long and one short beeps. One long and two short beeps Two short beeps. Description Success BIOS file size mismatch BIOS reading error Floppy drive not installed Chapter 4 85