Acer TravelMate 520 TravelMate 520 Service Guide - Page 60
Remove the three LCD cushions as shown, next remove the three screws from the LCD bezel.
View all Acer TravelMate 520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
2. At CN9, remove the two screws from the LCD FPC cable, and then disconnect the LCD FPC cable from the main board. 3. At CN8, disconnect the inverter cable from the main board. 4. Remove the LCD module from the main unit. 5. Remove the video capture kit cover from the LCD module on each side. 6. Remove the three LCD cushions as shown, next remove the three screws from the LCD bezel. NOTE: If you have 12.1" or 13.3" LCD, you need to remove five LCD cushions and five screws. 54 Chapter 3