Acer TravelMate 6293 TravelMate 6293 Service Guide - Page 82
No beep Error Messages List
View all Acer TravelMate 6293 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
No beep Error Messages List No beep Error Messages No beep, power-on indicator turns off and LCD is blank. No beep, power-on indicator turns on and LCD is blank. No beep, power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. No beep, power-on indicator turns on and a blinking cursor shown on LCD during POST. No beep during POST but system runs correctly. FRU/Action in Sequence Power source (battery pack and power adapter). See "Power System Check" on page 69. Ensure every connector is connected tightly and correctly Reconnect the DIMM LED board System board Power source (battery pack and power adapter). See "Power System Check" on page 69. Reconnect the LCD connector Hard disk drive LCD inverter ID LCD cable LCD Inverter LCD System board Reconnect the LCD connectors. LCD inverter ID LCD cable LCD inverter LCD System board Ensure every connector is connected tightly and correctly. System board Speaker System board 74 Chapter 4