Acer TravelMate C100 TravelMate C100 Service Guide - Page 62

Separating the Upper Case from the Lower Case 1. See "Removing the Battery Pack" on page 47 2. See "Removing the Middle Covers" on page 50 3. See "Removing the Keyboard" on page 50 4. See "Removing the LCD Module" on page 51 5. Disconnect the touch pad cable from the main board with a plastic flat screwdriver. 6. Disconnect the cover switch cable and RTC cable from the main board respectively. 7. Turn over the machine, please note that the machine should be put on a sponge with the two LCD support knobs against the edge of the sponge. Remove the eight screws at the back side of the main unit. 8. Release the RJ 11 & RJ45 rubber door and the USB rubber door. (Please do not remove the two rubber doors from the main unit. Separate the upper case from the lower case. 54 Chapter 3