Acer TravelMate C100 TravelMate C100 Service Guide - Page 65
Removing the System Board, Removing the PCMCIA Socket
![]() |
View all Acer TravelMate C100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Removing the System Board 1. See "Removing the Battery Pack" on page 47 2. See "Removing the Middle Covers" on page 50 3. See "Removing the Keyboard" on page 50 4. See "Removing the LCD Module" on page 51 5. See "Separating the Upper Case from the Lower Case" on page 54 6. Disconnect the sensor switch & microphone cable from the audio board connector on the main board and then remove the two screws on the main board as shown below. Remove the main board from the lower case with caution.. Removing the PCMCIA Socket 1. See "Removing the Battery Pack" on page 47 2. See "Removing the Middle Covers" on page 50 3. See "Removing the Keyboard" on page 50 4. See "Removing the LCD Module" on page 51 5. See "Separating the Upper Case from the Lower Case" on page 54 6. See "Removing the System Board" on page 57 7. Remove the smart card FPC from the mainboard and the four screws. . Chapter 3 57