Acer Veriton 7800 Veriton 5800/6800/7800 Service Guide (Gigabyte MB) - Page 38

Parameter Virus Warning Description This feature allows you to enable the VIRUS warning function for IDE Hard Disk boot sector protection. If this function is enabled and there is someone attempt to write data into this area, BIOS will show a warning message on screen and the alarm will beep. This feature allows you to enable or disable the CPU L1&L2 cache function. This features allows you to enable or disable if the screen logo to display or no during POST This feature allows you to enable or disable if showing summary screen or not This feature allows the system to skip certain tests while booting. When this function is enabled, it will decrease the time needed to boot the system, which means to quick power on self test function Press [Enter] to enter the sub menu to select Hard Disk Boot Device Priority. The item allows you to set the sequence of boot device where BIOS attempts to load the disk operating system. This item allows you to enable or disable to boot from other device This item allows you to enable or disable to set keyboard is number keys or arrow keys This option is used to set up the A20 signal control necessary for access to the 1MB memory. Select whether the password is required every time the system boots or only when you enter setup. This option is used to set up enable or disable the APCI funtion Limit CPU ID function to 3. It helps to solve old OS like NT4 installing issue. Enabled Disabled Options CPU L1&L2 Cache Silent Boot Configuration Table Quick Power On Self Test Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Hard Disk Boot Priority Use wx to select a device, then press to move it up, or < - > to move it down the list. Floppy, LS120, Hard Disk, CD-ROM, ZIP, USB-FDD, USB-ZIP, USBCDROM, USB-HDD, LAN, Disabled Enabled Disabled Enabled Disabled Fast : Let chipset control Gate 20 Normal : A pin in the keyboard controller System Setup Enabled Disabled Enabled : Limit CPUID Maximum value to 3 when use older OS like NT4. Disabled : Disables CPUID Limit for Windows XP First / Second / Third Boot Device Boot other Devices Boot Up NumLock Status Gate A20 Option Security Option APCI Mode Limit CPUID Max. to 3 CPU Thermal Monitor 2(TM2) When Enable and CPU Die temperature Reach Threshold. Both core Clock Ratio & Voltage will be Reduced. When Disabled and CPU DIe Tlmperature Reach Threshold, Both Core CLock Ratio & Voltage will not be Reduced. Enabled Disabled ASF support Short for Advanced Streaming Format. A streaming multimedia file format developed by Microsoft. This fearure allows you to select the frame buffer size. Enabled Disabled 1MB 8MB Enabled Disabled On-Chip Frame Buffer Size Hidden Setting Description HDD S.M.A.R.T Capability S.M.A.R.T which allows your hard disk to report any read/write errors and issue a warning when LDCM installed 37 Chapter 2