Acer Veriton M490G Acer Veriton M490, M490G, and M498G Service Guide - Page 28

Power Management Setup Parameter ACPI Aware O/S ACPI Suspend Mode Deep Power Off Mode Power On by RTC Alarm Power On by PCIE Devices Power On by PCI Devices Power On by Modem Ring Wake Up by PS/2 KB/ Mouse Wake Up by USB KB/ Mouse Restore On AC Power Loss Description This item supports ACPI (Advanced Configuration and Power management Interface).Usethis item to enable or disable the ACPI feature. Select an ACPI state. If Enabled, it will support EUP Lot6 Function. If Disabled, it will not support EUP Lot6Function. Enables or Disables to wake up the system by RTC Alarm Function Enables or disables to wake up the system from a power saving mode through an event on PCI Express device. The system can be turned off with a software command. If you enable this item, the systemcan automatically resume if there is an incoming call on the PCI. You must use an ATXpower supply in order to use this feature. Use this item to do wake-up action if inserting thePCI. This system can be turned off with a software command. If you enable this item, the systemcan automatically resume if there is an incoming call on the Modem. You must use an ATXpower supply in order to use this feature. Enables or disables to wake up the system from a power saving mode using a PS2 keyboard or mouse. If enabled, press any key or click the mouse will wake system from S1/ S3 state. Enables or disables the system to reboot after a power failure or interrupt occurs. Option YES No S3 (STR) S1 (POS) Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Disabled Enabled Enabled Disabled Enabled Disabled Power Off Power On Last State Chapter 2 20