Acer Veriton N260G Acer Veriton N260G Series Service Guide - Page 67

Hard disk drive cannot format 1.Enter BIOS Setup and Load default settings. completely. 2.Hard disk drive cable. 3.Hard disk drive. 4.Main board. Hard disk drive has write error. 1.Enter BIOS Setup and Load default settings. 2.Hard disk drive. Hard disk drive LED fails to light, but 1.With the system power on, measure the voltage of system operates normally. hard disk LED connector. 2.Hard drive LED cable. CD/DVD-ROM Drive NOTE: Ensure CD/DVD-ROM drive is configured correctly in BIOS Setup, cable/jumper are set correctly and its laser beam is clean before diagnosing any CD/DVD-ROM drive problems. CD/DVD-ROM drive LED doesn't come 1.CD/DVD-ROM drive on but works normally. CD/DVD-ROM drive LED flashes for 1.CD/DVD-ROM may have dirt or foreign material on it. more than 30 seconds before LED Check with a known good disc. shutting off. 2. CD/DVD-ROM is not inserted properly. 3.CD/DVD-ROM is damaged. Software asks to reinstall disc.Software displays a reading CD/DVD error. CD/DVD-ROM drive cannot load or eject 1.Disconnect all cables from CD/DVD-ROM drive except when the system is turned on and its power cable, then press eject button to try to unload eject button is pressed and held. the disk. 2.CD/DVD-ROM drive power. 3.CD/DVD-ROM drive CD/DVD-ROM drive does not read and 1.CD may have dirt or foreign material on it. Check with there are no messages are displayed. a known good disc. 2.Ensure the CD/DVD-ROM driver is installed properly. 3.CD/DVD-ROM drive. CD/DVD-ROM drive can play audio CD 1.Ensure the headphone jack of the CD/DVD-ROM has but no sound output. an output. 2.Turn up the sound volume. 3.Speaker power/connection/cable. 4.CD/DVD-ROM drive. Error Symptom Real-time clock is inaccurate. Real-Time Clock Action/FRU 1.Ensure the information in the Standard CMOS Feature of BIOS Setup is set correctly. 2.RTC battery. 61