Acer Veriton S480G Service Guide - Page 78

2-2:Create a"RAID Ready" System into" RAID 1" with two Hard Drives by'Create RAID Volume from Existing HDD Drive '. Step 1: Install Vista OS with one SATA HDD. Step 2: Shut down the system,then add another Serial ATA hard drive in the system. Step 3: Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4: Click on the by'Create RAID Volume from Existing HDD Drive ' to create a RAID volume. Step 5: Step 6: Click "Next" at create a RAID volume window. Key the name in "Volume Name" and select "RAID 1" in RAID Level. Step 7: Picture10 Select minimum HDD as "Source Hard Drive". Step 8: Select Menber Hard Drive(s). Step 9: Specify Volume Size then press "next". Step 10: Press "next" to finish setup and start create RAID1. It may takes half and hours to create RAID1.After create completely,it will ask to Step 11: reboot to finish create RAID1.