Acer Veriton S480G Service Guide - Page 80

Step 8: At least select two HDD as Menber Hard Drive(s). Picture13 Step 9: Specify Volume Size then press "next". Step 10: Press "next" to finish setup and start create RAID5. Step 11: It may takes half and hours to create RAID5.After create completely,it will ask to reboot to finish create RAID5. 2-4:Create a"RAID Ready" System into" RAID 10" with three Hard Drives by'Create RAID Volume from Existing HDD Drive '. Step 1: Install Vista OS with one SATA HDD. Step 2: Shut down the system,then add other two serial ATA hard drives in the system. Step 3: Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4: Step 5: Click on the by'Create RAID Volume from Existing HDD Drive ' to create a RAID Click "Next" at create a RAID volume window. Step 6: Key the name in "Volume Name" and select "RAID 10" in RAID Level.