Acer Veriton S480G Service Guide - Page 82

Step 8: At least select two HDD as Menber Hard Drive(s). Step 9: Specify Volume Size then press "next". Step 10: Press "next" to finish setup and start create RAID 10. It may takes half and hours to create RAID 10.After create completely,it will ask to Step 11: reboot to finish create RAID10. 2-5:Create a"RAID Ready" System into" RAID 0" with two Hard Drives by 'Create RAID Volume '. Step 1: Step 2: Step 3: Step 4: Install Vista OS with one SATA HDD. Shut down the system,then add another two serial ATA hard drives in the system. Boot to OS desktop, open the Intel® Matrix Storage Console. Click on the by'Create RAID Volume' to create a RAID volume. Step 5: Step 6: Step 7: Picture16 Click "Next" at create a RAID volume window. Key the name in "Volume Name" and select "RAID 0" in RAID Level. At least select two HDDs as "Volume Location".