Acer Veriton S480G Service Guide - Page 84

2-6:Create a"RAID Ready" System into" RAID 1" with two Hard Drives by 'Create RAID Volume '. Step 1: Install Vista OS with one SATA HDD. Step 2: Shut down the system,then add another two serial ATA hard drives in the system. Step 3: Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4: Click on the by'Create RAID Volume' to create a RAID volume. Step 5: Click "Next" at create a RAID volume window. Step 6: Key the name in "Volume Name" and select "RAID 1" in RAID Level. Step 7: At least select two HDDs as "Volume Location". Step 8: Specify Volume Size then press "next". Step 9: Step 10: Press "next" to finish setup and start create RAID 1. It may takes half and hours to create RAID 1.After create completely,it will ask to reboot to finish create RAID 1. 2-7:Create a"RAID Ready" System into" RAID 5" with two Hard Drives by 'Create RAID Volume '. Step 1: Install Vista OS with one SATA HDD. Step 2: Shut down the system,then add another three serial ATA hard drives in the system. Step 3: Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4: Click on the by'Create RAID Volume' to create a RAID volume. Step 5: Click "Next" at create a RAID volume window. Step 6: Key the name in "Volume Name" and select "RAID 5" in RAID Level. Step 7: At least select three HDDs as "Volume Location". Step 8: Specify Volume Size then press "next". Step 9: Step 10: Press "next" to finish setup and start create RAID 5. It may takes half and hours to create RAID 5.After create completely,it will ask to reboot to finish create RAID 5. 2-8:Create a"RAID Ready" System into" RAID 10" with two Hard Drives by 'Create RAID Volume '. Step 1: Install Vista OS with one SATA HDD. Step 2: Shut down the system,then add another four serial ATA hard drives in the system. Step 3: Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4: Click on the by'Create RAID Volume' to create a RAID volume. Step 5: Click "Next" at create a RAID volume window. Step 6: Key the name in "Volume Name" and select "RAID 10" in RAID Level. Step 7: At least select three HDDs as "Volume Location". Step 8: Specify Volume Size then press "next". Step 9: Step 10: Press "next" to finish setup and start create RAID 10. It may takes half and hours to create RAID 10.After create completely,it will ask to reboot to finish create RAID 10.