Acer Veriton Z2610G Acer Veriton Z2610G and Z2621G Desktop Service Guide - Page 29

Boot Options menu Field Boot Priority Order 1st Boot Device 2nd Boot Device 3rd Boot Device 4th Boot Device 5th Boot Device EFI Device Priority Hard Disk Priority Optical Disc Drive Priority Removable Device Priority Network Device Priority Quiet Boot Halt On Description Value Displays the device assigned to the specified boot sequence. The Setup Utility attempts to boot the operating system in this order. By default, the computer searches for boot devices in the following order: • EFI environment • Hard disk • Optical drive (CD/DVD) • Removable device • Network boot (LAN) Press Enter to set the boot priority for the EFI (Extensible Firmware Interface) environment. Press Enter to set the boot priority for the hard drive. Press Enter to set the boot priority for the optical drive. Press Enter to set the boot priority for a removable USB drive. Press Enter to set the boot priority for a network boot. When enabled, BIOS will show a full screen logo when booting; if disabled, BIOS will show the diagnostic POST screen when booting. Disabled Enabled Determines whether the system will stop for an error during the POST. Options include: • All, but Keyboard - If a keyboard error is detected, BIOS will pause the system. • All Errors -- Any error detected will pause the system. • No Errors - BIOS will ignore any errors detected during POST All, But Keyboard All Errors No Errors Veriton Z2610G/Z2611G/Z2620G/Z2621G AIO Computer Service Guide 21