Acer WirlessHD-Kit User Manual
Acer WirlessHD-Kit Manual
![]() |
View all Acer WirlessHD-Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer WirlessHD-Kit manual content summary:
- Acer WirlessHD-Kit | User Manual - Page 1
unit (MWIT1) • Receiver unit (MWIR1) • HDMI® cable • User's Guide • Warranty • Power adapter • MHL cable If any of the above items is disassemble or modify your product. Only authorized personnel should perform service. • Your device is not water-resistant; keep it dry. • Only use the supplied - Acer WirlessHD-Kit | User Manual - Page 2
English Hardware 60 GHz Wireless HD MWIR1 / MWIT1 Front panel LED indicator LED Color Power Blue Behavior Indication Blinking slowly The transmitter has started transmitting and has not yet found the receiver. Blinking fast Transmitter and receiver are linked and communicating with each other - Acer WirlessHD-Kit | User Manual - Page 3
, such as a computer, Blu-ray player or a smartphone using the HDMI/MHL cable. If connected to a computer, make sure the computer output resolution is in a supported video format. 2. Connect the receiver to the HDMI/MHL port on the projector. Select WirelessHD from the projector source list. 3 - Acer WirlessHD-Kit | User Manual - Page 4
Step 1 The transmitter (MWIT1) English Step 2 The receiver (MWIR1) Notes For the best results, the MWIT1 and MWIR1 should: Face each other and be in the same room. Be no more than 33 feet (10 meters) apart. MWIT1 should not be placed in a cabinet or on a closed shelf. Do not place near metal - Acer WirlessHD-Kit | User Manual - Page 5
3. Check that the transmitter is powered. English 4. Turn on the transmitter. Select the source Connecting to a different transmitter 1. Turn on the new transmitter. Power switch 2. Press the Find next button for 2 seconds. Find next button 3. The LED on the transmitter will start blinking - Acer WirlessHD-Kit | User Manual - Page 6
English Specifications Specifications Standards Wireless HD 1.1, HDMI 1.4a, MHL V2.0 Frequency 60 GHz Input/output HDMI/MHL -n (MWIT1), MHL out x 1 (MWIR1) Antenna type 24 antenna array Range 10 meters in-room usage A/V port MWIT1: 1 port (CEC pass through) MWIR1: 1 port (CEC pass through - Acer WirlessHD-Kit | User Manual - Page 7
Video formats English Video format Vertical refresh Color space Sampling Supported 4:2:2 Yes 480i (1440 x 480i) YCbCr 59.94 Hz 4:4:4 Yes RGB 4:4:4 Yes 480p/480pw (640 x 480p/ 720 x 480p) 59.94 / YCbCr 60 Hz RGB 4:2:2 4:4:4 4:4:4 Yes Yes - Acer WirlessHD-Kit | User Manual - Page 8
23.976 / YCbCr 24 Hz RGB 4:2:2 4:4:4 4:4:4 1080p (1920 x 1080p) 50 Hz YCbCr RGB 4:2:2 4:4:4 4:4:4 59.94 / YCbCr 60 Hz RGB 4:2:2 4:4:4 4:4:4 VGA (640 x 480) 59.94 Hz RGB 4:4:4 SVGA (800 x 600) 60 Hz RGB 4:4:4 XGA (1024 x 768) 60 Hz RGB 4:4:4 WXGA (1280 x 768/ 60 Hz RGB 1280 x 800) - Acer WirlessHD-Kit | User Manual - Page 9
88.2 96 176.4 192 kHz kHz kHz kHz kHz kHz kHz Supported Supported *Specification subject to change without notice. FCC Statement: Federal Communication and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is - Acer WirlessHD-Kit | User Manual - Page 10
English FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may - Acer WirlessHD-Kit | User Manual - Page 11
du MWIHD1 Introduction Contenu de l'emballage Les éléments suivants doivent être inclus : • Émetteur (MWIT1) • Récepteur (MWIR1) • Câble HDMI® • Guide d'utilisation • Garantie • Adaptateur secteur • Câble MHL Si un des éléments ci-dessus était manquant ou endommagé, veuillez contacter immédiatement - Acer WirlessHD-Kit | User Manual - Page 12
Matériel MWIR1 / MWIT1HD sans fil 60 GHz Français Panneau avant Témoin à diode Diode Couleur Comportement Indication Clignote lentement L'émetteur a commencé à transmettre et n'a pas encore trouvé le récepteur. Alimenta tion Bleu Clignote rapidement Allumé L'émetteur et le récepteur sont - Acer WirlessHD-Kit | User Manual - Page 13
Panneau arrière Français Trouver suivant HDMI/MHL Interrupteur Entrée d'alimentation c.c Configuration Trouver suivant Appui court (< 10 secondes) pour détecter la source suivante. Cette fonction vous permet de basculer la source de l'audio/vidéo vers un autre émetteur sans fil HD à portée. - Acer WirlessHD-Kit | User Manual - Page 14
Français 2. Connectez le récepteur au port HDMI/MHL sur le projecteur. Sélectionnez WirelessHD dans la liste des sources de projecteurs. Étape 1 L'émetteur (MWIT1) Étape 2 Le receveur (MWIR1) Remarques Pour obtenir les meilleurs résultats, le MWIT1 et le MWIR1 devrait : Être en face l'un de l' - Acer WirlessHD-Kit | User Manual - Page 15
3. Vérifiez que l'émetteur est alimenté. Français 4. Allumez l'émetteur. Sélectionner la source Se connecter à un émetteur différent 1. Allumez le nouvel émetteur. Interrupteur d'alimentation 2. Appuyez le bouton Trouver suivant pendant 2 secondes. Bouton Trouver suivant 3. La diode sur l'é - Acer WirlessHD-Kit | User Manual - Page 16
Français Caractéristiques Caractéristiques Standards Sans fil HD 1.1, HDMI 1.4a, MHL V2.0 Fréquence 60 GHz Entrée/Sortie HDMI/MHL -n (MWIT1), Sortie MHL x 1 (MWIR1) Type d'antenne Groupe de 24 antennes Plage 10 mètres en utilisation en intérieur Port A/V MWIT1 : 1 port (relais CEC) - Acer WirlessHD-Kit | User Manual - Page 17
Formats vidéo Français Format vidéo Rafraîchi ssement vertical Espace couleur Échantil lonnage Pris en charge 4:2:2 Oui 480i (1440 x 480i) 59,94 Hz YCbCr 4:4:4 Oui RVB 4:4:4 Oui 480p/480pw (640 x 480p/ 720 x 480p) 59,94 / 60 Hz YCbCr RVB 4:2:2 4:4:4 4:4:4 Oui Oui Oui 4:2:2 Oui - Acer WirlessHD-Kit | User Manual - Page 18
23,976 / 24 Hz YCbCr RVB 4:2:2 4:4:4 4:4:4 1080p (1920 x 1080p) 50 Hz YCbCr RVB 4:2:2 4:4:4 4:4:4 59,94 / 60 YCbCr Hz RVB 4:2:2 4:4:4 4:4:4 VGA (640 x 480) 59,94 Hz RVB 4:4:4 SVGA (800 x 600) 60 Hz RVB 4:4:4 XGA (1024 x 768) 60 Hz RVB 4:4:4 WXGA (1280 x 768/ 60 Hz RVB 4:4:4 1280 - Acer WirlessHD-Kit | User Manual - Page 19
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Acer WirlessHD-Kit | User Manual - Page 20
Français FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may - Acer WirlessHD-Kit | User Manual - Page 21
Deutsch 60 GHz WLAN HD Transceiver MWIHD1 Bedienungsanleitung Einleitung Packungsinhalt Die folgenden Artikel sollten enthalten sein: • Sendeeinheit (MWIT1) • Empfangseinheit (MWIR1) • HDMI® Kabel • Bedienungsanleitung • Garantie • Netzteil • MHL-Kabel Wenn einer der oben genannten Artikel beschä - Acer WirlessHD-Kit | User Manual - Page 22
Hardware 60 GHz WLAN HD MWIR1 / MWIT1 Deutsch Vorderseite LED-Anzeige LED Farbe Ein/Aus Blau Verhalten Anzeige Blinkt langsam Der Sender hat mit dem Senden begonnen und dem Empfänger noch nicht gefunden. Blinkt schnell Sender und Empfänger sind miteinander verbunden und kommunizieren - Acer WirlessHD-Kit | User Manual - Page 23
Rückseite Deutsch Nächste HDMI/MHL finden Ein/Aus- DCSchalter Eingang Konfiguration Nächste finden Langsam drücken (< 10 Sekunden), um die nächste Quelle zu suchen. Mit dieser Funktion können die Audio/Video-Quelle auf einen WLAN HD Sender in Reichweite wechseln. Dies trennt die aktuelle - Acer WirlessHD-Kit | User Manual - Page 24
Deutsch Ausgangsauflösung des Computers der eines unterstützten Videoformats entspricht. 2. Verbinden Sie den Empfänger mit dem HDMI/MHL-Anschluss am Projektor. Wählen WirelessHD aus der Quellliste des Projektors. Schritt 1 Der Sender (MWIT1) Schritt 2 Der Empfänger (MWIR1) Notizen Für optimale - Acer WirlessHD-Kit | User Manual - Page 25
3. Prüfen Sie, dass der Sender eingeschaltet ist. Deutsch 4. Schalten Sie den Sender ein. Auswahl der Quelle Verbindung mit einem anderen Sender 1. Schalten Sie den neuen Sender ein. Ein/Aus-Schalter 2. Drücken Sie 2 Sekunden lang auf Nächste finden. Nächste finden Taste 3. Die LED am Sender wird - Acer WirlessHD-Kit | User Manual - Page 26
Deutsch Technische Daten Technische Daten Standards WLAN HD 1.1, HDMI 1.4a, MHL V2.0 Frequenz 60 GHz Eingang/Ausgang HDMI/MHL -n (MWIT1), MHL Ausgang x 1 (MWIR1) Antennentyp 24 Antennenanordnung Bereich 10 Meter Nutzung innen A/V-Anschluss MWIT1: 1 Anschluss (CEC Passthrough) MWIR1: 1 - Acer WirlessHD-Kit | User Manual - Page 27
Videoformate Deutsch Vertikale Videoformat Aktualisie Farbraum Abtastung Unterstützt rung 4:2:2 Ja 480i (1440 x 480i) 59,94 Hz YCbCr 4:4:4 Ja RGB 4:4:4 Ja 480p/480pw (640 x 480p/ 720 x 480p) 59,94 / 60 Hz YCbCr RGB 4:2:2 4:4:4 4:4:4 Ja Ja Ja 4:2:2 Ja 576i (1440 x 576i) 50 Hz - Acer WirlessHD-Kit | User Manual - Page 28
23,976 / YCbCr 24 Hz RGB 4:2:2 4:4:4 4:4:4 1080p (1920 x 1080p) 50 Hz YCbCr RGB 4:2:2 4:4:4 4:4:4 59,94 / YCbCr 60 Hz RGB 4:2:2 4:4:4 4:4:4 VGA (640 x 480) 59,94 Hz RGB 4:4:4 SVGA (800 x 600) 60 Hz RGB 4:4:4 XGA (1024 x 768) 60 Hz RGB 4:4:4 WXGA (1280 x 768/ 60 Hz RGB 1280 x 800) - Acer WirlessHD-Kit | User Manual - Page 29
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Acer WirlessHD-Kit | User Manual - Page 30
Deutsch FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may - Acer WirlessHD-Kit | User Manual - Page 31
Italiano Ricetrasmettitore HD wireless da 60 GHz Guida per l'utente di MWIHD1 Introduzione Contenuto della confezione Devono essere presenti i seguenti articoli: • Unità del trasmettitore (MWIT1) • Unità del ricevitore (MWIR1) • Cavo HDMI® • Guida per l'utente • Garanzia • Adattatore di - Acer WirlessHD-Kit | User Manual - Page 32
Italiano Hardware 60 GHz Wireless HD MWIR1 / MWIT1 Pannello anteriore Indicatore LED LED Colore Comporta mento Indicazione Il trasmettitore ha Lampeggio iniziato la trasmissione lento e non ha ancora trovato il ricevitore. Alimenta zione Blu Lampeggio rapido Il trasmettitore e il - Acer WirlessHD-Kit | User Manual - Page 33
Pannello posteriore Italiano Trova HDMI/MHL Interruttore Ingresso successiva alimentazione CC Configurazione Trova successiva Premere brevemente (< 10 secondi) per rilevare la sorgente successiva. Questa funzione consente di commutare la sorgente audio/video a un altro trasmettitore Wireless - Acer WirlessHD-Kit | User Manual - Page 34
Italiano 2. Collegare il ricevitore alla porta HDMI/MHL del proiettore. Selezionare WirelessHD dall'elenco delle sorgenti del proiettore. Passo 1 Il trasmettitore (MWIT1) Passo 2 Il ricevitore (MWIR1) Note Per ottenere risultati ottimali, il MWIT1 e il MWIR1 devono: essere uno di fronte all'altro - Acer WirlessHD-Kit | User Manual - Page 35
3. Verificare che il trasmettitore sia alimentato. Italiano 4. Accendere il trasmettitore. Selezione della sorgente Collegamento a un trasmettitore diverso 1. Accendere il nuovo trasmettitore. Interruttore alimentazione 2. Premere il pulsante Trova successiva per 2 secondi. Trova il pulsante - Acer WirlessHD-Kit | User Manual - Page 36
Italiano Specifiche Specifiche Standard Wireless HD 1.1, HDMI 1.4a, MHL V2.0 Frequenza 60 GHz Ingresso/uscita HDMI/MHL -n (MWIT1), Uscita MHL x 1 (MWIR1) Tipo di antenna Gruppo di 24 antenne Intervallo 10 metri utilizzo nella stanza Porta A/V MWIT1: 1 porta (CEC pass through) MWIR1: 1 - Acer WirlessHD-Kit | User Manual - Page 37
Formati video Italiano Formato video Aggiorna mento verticale Spazio colore Campiona mento Suppor tato 4:2:2 Sì 480i (1440 x 480i) YCbCr 59,94 Hz 4:4:4 Sì RGB 4:4:4 Sì 480p/480pw (640 x 480p/ 720 x 480p) 59,94 / 60 YCbCr Hz RGB 4:2:2 4:4:4 4:4:4 Sì Sì Sì 4:2:2 Sì 576i (1440 x - Acer WirlessHD-Kit | User Manual - Page 38
23,976 / YCbCr 24 Hz RGB 4:2:2 4:4:4 4:4:4 1080p (1920 x 1080p) 50 Hz YCbCr RGB 4:2:2 4:4:4 4:4:4 59,94 / 60 YCbCr Hz RGB 4:2:2 4:4:4 4:4:4 VGA (640 x 480) 59,94 Hz RGB 4:4:4 SVGA (800 x 600) 60 Hz RGB 4:4:4 XGA (1024 x 768) 60 Hz RGB 4:4:4 WXGA (1280 x 768/ 60 Hz RGB 1280 x 800) - Acer WirlessHD-Kit | User Manual - Page 39
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Acer WirlessHD-Kit | User Manual - Page 40
Italiano FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may - Acer WirlessHD-Kit | User Manual - Page 41
MWIHD1 Introducción Contenido de la caja La caja debería incluir los siguientes artículos: • Unidad transmisora (MWIT1) • Unidad receptora (MWIR1) • Cable HDMI® • Manual de usuario • Garantía • Adaptador de corriente • Cable MHL Si alguno de los artículos anteriores falta de la caja o está dañado - Acer WirlessHD-Kit | User Manual - Page 42
Español Hardware MWIR1/MWIT1 inalámbrico HD 60 GHz Panel frontal Indicador LED LED Color Alimenta ción Azul Comporta miento Indicación Parpadeo lento El transmisor ha iniciado la transmisión pero aún no ha encontrado el receptor. Parpadeo rápido El transmisor y el receptor están vinculados - Acer WirlessHD-Kit | User Manual - Page 43
Panel trasero Español Buscar HDMI/MHL Interruptor de Entrada siguiente encendido de CC Configuración Buscar siguiente Pulsar brevemente (< 10 segundos) para detectar la siguiente fuente. Esta función le permite conmutar la fuente de audio/vídeo a otro transmisor HD inalámbrico que se - Acer WirlessHD-Kit | User Manual - Page 44
Español formato de vídeo compatible. 2. Conecte el receptor al puerto HDMI/MHL del proyector. Seleccione WirelessHD en la lista de fuentes del proyector. Paso 1 El transmisor (MWIT1) Paso 2 El receptor (MWIR1) Notas Para lograr los mejores resultados posibles el MWIT1 y el MWIR1 deben: Estar - Acer WirlessHD-Kit | User Manual - Page 45
3. Asegúrese de que el transmisor se encuentra encendido. Español 4. Encienda el transmisor. Seleccione la fuente Conexión a un transmisor distinto 1. Encienda el nuevo transmisor. Interruptor de encendido 2. Pulse el botón Buscar siguiente durante 2 segundos. Botón Buscar siguiente 3. El LED del - Acer WirlessHD-Kit | User Manual - Page 46
Español Especificaciones Especificaciones Estándares HD inalámbrico 1.1, HDMI 1.4a, MHL V2.0 Frecuencia 60 GHz Entrada/salida HDMI/MHL -n (MWIT1), 1 salida MHL (MWIR1) Tipo de antena Matriz de 24 antenas Alcance Uso de 10 metros en salas Puerto de A/V MWIT1: 1 puerto (pasarela CEC) - Acer WirlessHD-Kit | User Manual - Page 47
Formatos de vídeo Español Formato de vídeo Actualiza ción vertical Espacio de color Muestreo Compati ble 4:2:2 SÍ 480i (1440 × 480i) 59,94 Hz YCbCr 4:4:4 SÍ RGB 4:4:4 SÍ 480p/480pw 4:2:2 SÍ (640 × 59,94/60 YCbCr 4:4:4 SÍ 480p/720 × Hz 480p) RGB 4:4:4 SÍ 4:2:2 SÍ 576i ( - Acer WirlessHD-Kit | User Manual - Page 48
23,976/ YCbCr 24 Hz RGB 4:2:2 4:4:4 4:4:4 1080p (1920 × 1080p) 50 Hz YCbCr RGB 4:2:2 4:4:4 4:4:4 59,94/60 YCbCr Hz RGB 4:2:2 4:4:4 4:4:4 VGA (640 × 480) 59,94 Hz RGB 4:4:4 SVGA (800 × 600) 60 Hz RGB 4:4:4 XGA (1024 × 768) 60 Hz RGB 4:4:4 WXGA (1280 x 768/ 60 Hz RGB 4:4:4 1280 x - Acer WirlessHD-Kit | User Manual - Page 49
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Acer WirlessHD-Kit | User Manual - Page 50
Español FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may - Acer WirlessHD-Kit | User Manual - Page 51
Introdução Conteúdo da embalagem Devem estar incluídos os seguintes itens: • Unidade Transmissora (MWIT1) • Unidade Receptora (MWIR1) • Cabo HDMI® • Manual do Utilizador • Garantia • Transformador • Cabo MHL Se algum dos itens acima estiver danificado ou em falta, contacte de imediato o fornecedor - Acer WirlessHD-Kit | User Manual - Page 52
Hardware Português 60 GHz HD Sem Fios MWIR1 / MWIT1 Painel frontal Indicador LED LED Cor Alimen tação Azul Comportamento Indicação Piscar lento O transmissor iniciou a transmissão e ainda não localizou ou receptor. Piscar rápido O transmissor e receptor estão conectados e a comunicar - Acer WirlessHD-Kit | User Manual - Page 53
Painel traseiro Português Encontrar HDMI/MHL Interruptor de Entrada seguinte alimentação DC Configuração Encontrar seguinte Pressionar curto (< 10 segundos) para detectar a fonte seguinte. Esta função permite-lhe mudar a fonte áudio/vídeo para outro transmissor Sem Fios HD ao alcance. Isto - Acer WirlessHD-Kit | User Manual - Page 54
Passo 1 O transmissor (MWIT1) Português Passo 2 O receptor (MWIR1) Notas Para os melhores resultados, o MWIT1 e MWIR1 devem: Estar frente a frente e na mesma divisão. Estar a menos de 33 pés (10 metros) de distância um do outro. O MWIT1 não deverá ser colocado num armário nem prateleira fechada. - Acer WirlessHD-Kit | User Manual - Page 55
3. Verifique se o transmissor está ligado. Português 4. Ligue o transmissor. Seleccione a fonte Ligar a um transmissor diferente 1. Ligue o novo transmissor. Interruptor de alimentação 2. Prima o botão Encontrar seguinte durante 2 segundos. Botão Encontrar seguinte 3. A LED no transmissor irá - Acer WirlessHD-Kit | User Manual - Page 56
Português Especificações Especificações Normas Wireless HD 1.1, HDMI 1.4a, MHL V2.0 Frequência 60 GHz Entrada/saída HDMI/MHL -n (MWIT1), saída MHL x 1 (MWIR1) Tipo de antena Conjunto de 24 antenas Alcance 10 metros, em utilização dentro de uma divisão Porta A/V MWIT1: 1 porta (passagem - Acer WirlessHD-Kit | User Manual - Page 57
Formatos vídeo Português Formato vídeo Actuali zação vertical Gama de cor Amostra gem Suportado 4:2:2 Sim 480i (1440 x 480i) YCbCr 59,94 Hz 4:4:4 Sim RGB 4:4:4 Sim 480p/480pw (640 x 480p/ 720 x 480p) 59,94 / YCbCr 60 Hz RGB 4:2:2 4:4:4 4:4:4 Sim Sim Sim 4:2:2 Sim 576i (1440 x - Acer WirlessHD-Kit | User Manual - Page 58
23,976 / YCbCr 24 Hz RGB 4:2:2 4:4:4 4:4:4 1080p (1920 x 1080p) 50 Hz YCbCr RGB 4:2:2 4:4:4 4:4:4 59,94 / YCbCr 60 Hz RGB 4:2:2 4:4:4 4:4:4 VGA (640 x 480) 59,94 Hz RGB 4:4:4 SVGA (800 x 600) 60 Hz RGB 4:4:4 XGA (1024 x 768) 60 Hz RGB 4:4:4 WXGA (1280 x 768/ 60 Hz RGB 1280 x 800) - Acer WirlessHD-Kit | User Manual - Page 59
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Acer WirlessHD-Kit | User Manual - Page 60
Português FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may - Acer WirlessHD-Kit | User Manual - Page 61
繁體中文 60 GHz 無線 HD 收發器 MWIHD1 簡介 MWIT1 MWIR1) • HDMI MHL 40° C 的 AC 1 - Acer WirlessHD-Kit | User Manual - Page 62
硬體 繁體中文 60 GHz 無線 HD MWIR1 / MWIT1 前面板 LED 指示燈 LED 顏色 行為 指示 電源 藍色 開啟 MWIR1 與 MWIT1 關閉 2 - Acer WirlessHD-Kit | User Manual - Page 63
後面板 繁體中文 HDMI/MHL DC 輸入 配置 短按 (< 10 HD 10 將 HDMI/MHL HDMI/MHL DC 輸入 DC 安裝 設定步驟 1. 使用 HDMI/MHL 3 - Acer WirlessHD-Kit | User Manual - Page 64
繁體中文 2 HDMI/MHL WirelessHD。 步驟 1 傳輸器 (MWIT1) 步驟 2 接收器 (MWIR1) MWIT1 與 MWIR1 應: 33 英尺 (10 公尺)。MWIT1 4 - Acer WirlessHD-Kit | User Manual - Page 65
3 繁體中文 4 選取來源 1 2 2 秒。 3 LED LED 5 - Acer WirlessHD-Kit | User Manual - Page 66
繁體中文 規格 規格 A/V 連接埠 物理 無線 HD 1.1、HDMI 1.4a、MHL V2.0 60 GHz HDMI/MHL -n (MWIT1) 、 MHL 輸出 x 1 (MWIR1) 24 10 公尺 MWIT1:1 連接埠 (CEC 傳遞) MWIR1:1 連接埠 (CEC 傳遞) 106 g (MWIT1) 120 g (MWIR1) 88.0 x 72.0 x 31.2 mm (MWIT1) 100.0 x 30.0 x 18.0 mm (MWIR1) LED SRRC 編號 輸入: AC 100 至 240 V 於 50 - Acer WirlessHD-Kit | User Manual - Page 67
影像格式 繁體中文 480i (1440 x 480i) YCbCr 59.94 Hz RGB 480p/480pw (640 x 480p/ 720 x 480p) 59.94 / 60 YCbCr Hz RGB 576i (1440 x 576i) 576p/576pw (720 x 576p) 50 Hz 50 Hz YCbCr RGB YCbCr YCbCr RGB YCbCr 50 Hz 720p (1280 x 720p) 59.94 / 60 Hz RGB YCbCr RGB YCbCr 50 Hz 1080i RGB (1920 x - Acer WirlessHD-Kit | User Manual - Page 68
繁體中文 4:2:2 是 23.976 / 24 Hz YCbCr 4:4:4 是 RGB 4:4:4 是 4:2:2 是 1080p (1920 x 1080p) 50 Hz YCbCr 4:4:4 是 RGB 4:4:4 是 4:2:2 是 59.94 / 60 YCbCr Hz 4:4:4 是 RGB 4:4:4 是 VGA (640 x 480) 59.94 Hz RGB 4:4:4 是 SVGA (800 x 600) 60 Hz RGB 4:4:4 是 XGA (1024 x 768) 60 Hz RGB 4:4:4 是 - Acer WirlessHD-Kit | User Manual - Page 69
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Acer WirlessHD-Kit | User Manual - Page 70
繁體中文 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not - Acer WirlessHD-Kit | User Manual - Page 71
简体中文 60 GHz 无线 HD 收发器 MWIHD1 简介 包装内容 MWIT1 MWIR1) • HDMI MHL 40°C AC 1 - Acer WirlessHD-Kit | User Manual - Page 72
硬件 60 GHz 无线 HD MWIR1 / MWIT1 简体中文 前面板 LED 指示灯 LED 指示灯 颜色 行为 慢闪 电源 蓝色 关闭 指示 MWIR1 和 MWIT1 2 - Acer WirlessHD-Kit | User Manual - Page 73
后面板 简体中文 HDMI/MHL 配置 短按 (< 10 HD 10 将 HDMI/MHL HDMI/MHL 电脑。 安装 设置步骤 1. 用 HDMI/MHL 3 - Acer WirlessHD-Kit | User Manual - Page 74
简体中文 2 HDMI/MHL WirelessHD。 步骤 1 发射器 (MWIT1) 步骤 2 接收器 (MWIR1) MWIT1 和 MWIR1 应: 33 英尺 (10 米)。MWIT1 4 - Acer WirlessHD-Kit | User Manual - Page 75
3 4 简体中文 1 2 2 秒钟。 3 LED LED 5 - Acer WirlessHD-Kit | User Manual - Page 76
简体中文 规格 规格 A/V 端口 物理 LED 指示灯 使用环境 SRRC 号 无线 HD 1.1、HDMI 1.4a、MHL V2.0 60 GHz HDMI/MHL -n (MWIT1), MHL 输出 x 1 (MWIR1) 24 10 MWIT1:1 端口 (CEC 认证) MWIR1:1 端口 (CEC 认证) 106 克 (MWIT1) 120 克 (MWIR1) 88.0 x 72.0 x 31.2 毫米 (MWIT1) 100.0 x 30.0 x 18.0 毫米 (MWIR1) AC 100 至 240 V, 50 / 60 - Acer WirlessHD-Kit | User Manual - Page 77
视频格式 简体中文 480i (1440 x 480i) 59.94 Hz YCbCr RGB 4:2:2 4:4:4 4:4:4 480p/480pw (640 x 480p/ 720 x 480p) 59.94 / 60 Hz YCbCr RGB 4:2:2 4:4:4 4:4:4 576i (1440 x 576i) 50 Hz YCbCr RGB 4:2:2 4:4:4 4:4:4 576p/576pw (720 x 576p) 50 Hz YCbCr YCbCr RGB 4:2:2 4:4:4 4:4:4 50 Hz YCbCr - Acer WirlessHD-Kit | User Manual - Page 78
简体中文 4:2:2 是 23.976 / 24 Hz YCbCr 4:4:4 是 RGB 4:4:4 是 1080p (1920 x 1080p) 50 Hz 4:2:2 是 YCbCr 4:4:4 是 RGB 4:4:4 是 4:2:2 是 59.94 / 60 YCbCr Hz 4:4:4 是 RGB 4:4:4 是 VGA (640 x 480) 59.94 Hz RGB 4:4:4 是 SVGA (800 x 600) 60 Hz RGB 4:4:4 是 XGA (1024 x 768) 60 Hz RGB 4:4:4 是 WXGA - Acer WirlessHD-Kit | User Manual - Page 79
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Acer WirlessHD-Kit | User Manual - Page 80
简体中文 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not - Acer WirlessHD-Kit | User Manual - Page 81
IC Statement: This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the
![](/manual_guide/products/acer-computers-wirlesshdkit-user-manual-7a3b497/1.png)
English
1
60 GHz Wireless HD Transceiver
MWIHD1 User's Guide
Introduction
Package contents
The following items should be included:
•
Transmitter unit (MWIT1)
•
Receiver unit (MWIR1)
•
HDMI
®
cable
•
User's Guide
•
Warranty
•
Power adapter
•
MHL cable
If any of the above items is damaged or missing, please
contact your supplier immediately.
Us
ing the
product
safely
•
A
lways
tr
eat
your
p
r
od
uct
with
car
e
and keep
it
in
a
clean
and
d
u
st-
f
re
e
place.
•
D
o
not
e
xpos
e
y
o
ur
pro
duct
to
li
q
ui
d
,
mo
isture
o
r
humi
dity.
•
D
o
not
e
xpos
e
y
o
ur
pro
duct
t
o
temp
era
t
ure
s above
40° C when in operation.
•
D
o
not
d
r
op
or
th
row
your
produc
t.
•
D
o
not
a
ttem
p
t
t
o
di
sa
ssembl
e
o
r
mo
di
fy
your
p
r
oduct.
Onl
y
au
thor
ized
p
e
rson
nel
shoul
d
p
e
rform
s
e
rvice.
•
Your device is not water-resistant; keep it dry.
•
Only use the supplied AC adapter.