Acer X1130P Acer X1130P, X1230PK, X1230P, and X1237 Projector Series Service G - Page 21

Chapter 2 System Utilities Firmware Upgrade SOP Basic Operating Standby Mode： When standby mode, system power consumption will be less than 1 Watt. If user wants to enter this mode, user can just plug in power cord. Power, Lamp, Temp LED will show Red for 1 sec then power LED show red continuously as the figure shown. When the power LED shows Red, it means system is ready for standby. Besides, user can press power key to turn on projector after plugging in power cord when power led is red. Download Mode： This mode is applied for Download firmware. If operator wants to enter this mode, he should press and hold keypad Power and Menu together, then plug in power cord. Release the two keypads. Power, Lamp, Temp LED will show red light continuously. In download mode, you can use DLP composer to download new firmware and power LED will show purple while downloading. Standby Mode Download Mode Download WT6702 MCU Code：(in Low-Power 1 Watt Standby) System needs a few sec to download WT6702 MCU automatically. When Downloading：Temp LED will show red. When Download Success：System will go back Low-Power standby mode and Power LED will show red. When Download Fail: Lamp LED will show red. 21