Acer X1130P Acer X1130P, X1230PK, X1230P, and X1237 Projector Series Service G - Page 30

EDID Upgrade SOP Equipment List 1. PC : with parallel (printer) port 2. EDID Board 3. Printer cable : 25pin male-female (connect PC to EDID board) 4. D-sub cable* : with full 15pin (connect EDID board to Projector) 5. HDMI cable*(connect EDID board to Projector) 6. DVI cable* (connect EDID board to Projector) (*Note: Not every model's EDID input (D-sub, DVI, HDMI) is the same. Need to check what kind of file you need before download.) Setup Equipment 1. Connect between PC, EDID board and the Projector: Link to Projector : For DVI-D DDC download (no need in X1130/ X1230/ X1230S/ X1235/ X1230K series) Link to Projector : For HDMI DDC download (no need in X1130/ X1230/ X1230S/ X1235/ X1230K series) Please ignore this connector "25pin male-female cable" (normal printer cable) PC with parallel (printer) port EDID board Link to Main board : For D-sub DDC download 2. Need to set Jumper before using EDID board : J6 : 1,2 short J8 : 1,2 short J10 : short 3. How to use Download Tool : 30