Acer X1130P Acer X1130P, X1230PK, X1230P, and X1237 Projector Series Service G - Page 9

15.0 Audio 15.1 PC Audio Input 15.2 Speaker 16.0 Lamp hour 17.0 Closed Caption (CC) 17.1 CC version 18.0 Instant On 19.0 3D Projection (Front, Rear). X1130P: None X1130PA / X1230PK/ X1230P/ X1237/ X1230PA: see below SPEC X1130PA / X1230PK/ X1230P/ X1237/ X1230PA : Φ3.5mm stereo mini jack 500mVrms 10 KΩ or more X1130PA /X1230PK / X1230P/ X1237/ X1230PA: Speaker 8Ω 2W X 1, Amplifier 1W X1 Lamp hour = [Hour used in Normal Mode] + 3/4 *[Hour used in Eco. Mode] CC1/CC2/CC3/CC4 (Running change to phase-in X1130P/X1130PA /X1230PK / X1230P/ X1237/ X1230PA MP stage) After turn off projector, there is 120 seconds called "Instant On stage". At this stage, user can turn on the projector. Aftet this stage, projector will cooling for 20 seconds, and all keypads are not allowed to operate. (Running change to phase-in X1130P/X1130PA /X1230PK / X1230P/ X1237/ X1230PA MP stage) See below detail description. 3D Projection : This function is only for 3D contents and must wear 3D glasses. TI DDP DDP2430 • Does not support FRC (Frame Rate Conversion) • Can not support HQFS 60Hz 3D source from DVD which need to go thru FRC • Can only support 120Hz 3D source from PC (VGA/DVI/HDMI) OSD : TI DDP DDP2431 • Support FRC (Frame Rate Conversion) • Can support HQFS 60Hz 3D source from DVD which need to go thru FRC • Can support 120Hz 3D source from PC − Add "3D", "3D Sync Invert" in Image Page − "3D Sync Invert" is adjustable when above "3D" is on. Otherwise 反白 − When 3D is enabled, Display Mode(in Color Page) is not adjustable (反白). − For DDP2430 models : 3D / 3D Sync Invert , only appear for VGA/DVI/HDMI source. Disappear if other sources. − For DDP2230/2431 models : no this limitation. 9