Acer XB323UGP User Manual

Acer XB323UGP Manual

Acer XB323UGP manual content summary:

  • Acer XB323UGP | User Manual - Page 1
    Acer LCD Monitor User's Guide
  • Acer XB323UGP | User Manual - Page 2
    Guide Original Issue: 0/2020 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual Acer LCD Monitor User's Guide Model number Serial number Date
  • Acer XB323UGP | User Manual - Page 3
    The following are normal with the LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on
  • Acer XB323UGP | User Manual - Page 4
    power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not
  • Acer XB323UGP | User Manual - Page 5
    or its equivalent, 4.5 meters (15 feet) maximum length. Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to performance, indicating a need for service • the product does not operate normally after following the operating instructions
  • Acer XB323UGP | User Manual - Page 6
    a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally bodily injury or even death. Switch off the device near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots,
  • Acer XB323UGP | User Manual - Page 7
    vii Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For
  • Acer XB323UGP | User Manual - Page 8
    viii This product has been shipped enabled for power management: • Activate display's Sleep mode within 15 minutes of user inactivity. • Activate computer's Sleep mode within 30 minutes of user inactivity. Tips and information for comfortable use Computer users may complain of eyestrain and
  • Acer XB323UGP | User Manual - Page 9
    ix Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •
  • Acer XB323UGP | User Manual - Page 10
    POSITION ADJUSTMENT 3 CONNECTING THE POWER CORD 5 SAFETY PRECAUTION 5 CLEANING YOUR MONITOR 5 POWER SAVING 6 DDC...6 CONNECTOR PIN ASSIGNMENT 7 STANDARD TIMING TABLE 8 INSTALLATION 10 USER CONTROLS 11 TROUBLESHOOTING 22
  • Acer XB323UGP | User Manual - Page 11
    unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future.  LCD Monitor  Quick Start Guide  AC Power Cord  DP Cable (Optional)  HDMI Cable (Optional)  USB Cable (Optional) EN-1
  • Acer XB323UGP | User Manual - Page 12
    REMOVING THE STAND ARM FOR WALL MOUNT Note: Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. 1. Loosen and remove the screws with a Phillips screwdriver, then lift and remove the stand arm. 2. Your monitor is ready for wall mount. Note: If
  • Acer XB323UGP | User Manual - Page 13
    SCREEN POSITION ADJUSTMENT In order to optimize the best viewing position, you can adjust the height/tilt of the monitor. • Tilt Please see the illustration below for an example of the tilt range. Only at the highest point can 23 degrees of recline be offered for the angle of elevation. -5 o o •
  • Acer XB323UGP | User Manual - Page 14
    • Monitor Pivot Before rotating the display, lift it to the top position and then push it back to the utmost degree. Rotate until the monitor stops at 90°.  o o o PP • Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle.  o o EN
  • Acer XB323UGP | User Manual - Page 15
    CONNECTING THE POWER CORD  Check first to make sure that the power cord you use is the correct type required for your area.  This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required.  Plug one end of the AC
  • Acer XB323UGP | User Manual - Page 16
    around 3 seconds. DDC To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities
  • Acer XB323UGP | User Manual - Page 17
    CONNECTOR PIN ASSIGNMENT 19-Pin Color Display Signal Cable* PIN Meaning PIN 1. TMDS Data2+ 10. 2. TMDS Data2 Shield 11. 3. TMDS Data2- 12. 4. TMDS Data1+ 13. 5. TMDS Data1 Shield 14. 6. TMDS Data1- 15. 7. TMDS Data0+ 16. 8. TMDS Data0 Shield 17. 9. TMDS Data0- 18. 19.
  • Acer XB323UGP | User Manual - Page 18
    STANDARD TIMING TABLE Mode Resolution 1 VGA 640 x 480 2 VGA 640 x 480 3 VGA 640 x 480 4 MAC 640 x 480 5 VESA 720 x 400 6 SVGA 800 x 600 7 SVGA 800 x 600 8 SVGA 800 x 600 9 SVGA 800 x 600 10 MAC 832 x 624 11 XGA 1024 x 768 12 XGA 1024 x 768 13 XGA 1024 x 768
  • Acer XB323UGP | User Manual - Page 19
    Note: The DisplayPort of this monitor is purposely supporting the G-Sync compatible/Adaptive-Sync support technology. This technology allows Adaptive-Sync (DP) supported graphics source to dynamically adjust display refresh rate based on typical content frame rates in order to eliminate stuttering
  • Acer XB323UGP | User Manual - Page 20
    INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect HDMI Cable (Only HDMI-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. 1-2 Connect DP Cable (Only DP-input model) (
  • Acer XB323UGP | User Manual - Page 21
    USER CONTROLS Base Controls 1 2 3 4 1 No. Item 1 Power button/indicator 2 Hotkey 1, 2 buttons 3 Input button 4 Navi/OK button Description Turns the monitor on/off. Blue indicates power on. Amber indicates standby/power saving mode. Press to activate user defined hotkey function. Press to
  • Acer XB323UGP | User Manual - Page 22
    Adjusting the OSD settings Note: The following content is for general reference only. Actual product specifications may vary. The OSD (on-screen display) can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality,
  • Acer XB323UGP | User Manual - Page 23
    Adjusting the Brightness Open the Brightness control and select the brightness setting using the Navi/ OK button. When you are done, press the Navi/OK button to exit. Selecting the Input Open the Input control and select an available input source. When you are done, press the Navi/OK button to go
  • Acer XB323UGP | User Manual - Page 24
    The Function page Open the Function page to select a menu function, and adjust the settings which you want using the Navi/OK button. When you are done, press the Navi/OK button or to go back one level. Adjusting the Picture 1. Press the MENU key to bring up the OSD. 2. Using the Navi/OK button,
  • Acer XB323UGP | User Manual - Page 25
    8. ACM: Turn ACM on or off. The default is off. 9. HDR: Turn HDR Off, Auto or HDR-600. The default is Off. Select Auto enables this function to automatically detect and process HDR signal. Note: 1. If HDR is "Auto", then Modes is set to "HDR" automatically. 2. If HDR is "Auto", certain parameters (
  • Acer XB323UGP | User Manual - Page 26
    Adjusting the Color 1. Press the MENU key to open the OSD. 2. Using the Navi/OK button, select Color from the OSD. Then navigate to the setting you wish to adjust. 3. Use the Navi/OK button to select the setting. 4. Gamma mode allows you to adjust the luminance tone. The default value is 2.2 (
  • Acer XB323UGP | User Manual - Page 27
    7. Color Space: You can choose Standard, SMPTE-C, DCI, EBU, HDR, Rec. 709 or sRGB. Note: 1. If Color Space is "HDR", then Modes is set to "HDR" automatically. 2. If Color Space is not "HDR", then Modes is set to "Standard". 8. Grayscale Mode: Turn grayscale mode On or Off. 9. 6-axis Hue: Adjust the
  • Acer XB323UGP | User Manual - Page 28
    "OFF", then the user can set Over Drive to either one of the three settings including: (a) Extreme (b) Normal (c) Off 5. Adaptive-Sync: To control supporting Adaptive-Sync or not; the default is On. Note: Adaptive-Sync provides artifact-free performance. It is compatible with both Nvidia G-Sync and
  • Acer XB323UGP | User Manual - Page 29
    8. Aim Point: Show an Aim point on the screen for shooting games. Adjusting the OSD 1. Press the MENU key to open the OSD. 2. Using the Navi/OK button, select OSD from the OSD. Then navigate to the setting you wish to adjust. 3. Use the Navi/OK button to adjust any sliding scales. 4. Language: Set
  • Acer XB323UGP | User Manual - Page 30
    Adjusting the System 1. Press the MENU key to open the OSD. 2. Using the Navi/OK button, select System from the OSD. Then navigate to the setting you wish to adjust. 3. Use the Navi/OK button to select the setting. 4. Input: Select the source from an available input source. 5. Auto Source:
  • Acer XB323UGP | User Manual - Page 31
    9. PIP/PBP: The options for PIP/PBP Mode are Off, PIP Large, PIP Small, and PBP. You can also adjust the PIP Position, PBP Size, Sub Source, Source Swap, and Audio Source. 10. DDC/CI: Allows the monitor settings to be set through the software on the PC. Note: DDC/CI, short for Display Data Channel/
  • Acer XB323UGP | User Manual - Page 32
    Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. (HDMI/DP Mode) Problems Current Status LED ON No Picture LED OFF LED displays amber color Abnormal Sound (Only Audio-Input model) (Optional) No
  • Acer XB323UGP | User Manual - Page 33
    XB323U XB323U Apr. 24, 2020 EN-23
  • Acer XB323UGP | User Manual - Page 34
    Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

Acer LCD Monitor
User's Guide