Adaptec 2230SLP User Guide

Adaptec 2230SLP - SCSI RAID Controller Manual

Get Adaptec 2230SLP - SCSI RAID Controller PDF manuals and user guides
UPC - 760884150740
View all Adaptec 2230SLP manuals
Add to My Manuals
Save this manual to your list of manuals

Adaptec 2230SLP manual content summary:

  • Adaptec 2230SLP | User Guide - Page 1
    Command Line Utility for Internal RAID Storage User's Guide
  • Adaptec 2230SLP | User Guide - Page 2
    , Inc., 691 South Milpitas Blvd., Milpitas, CA 95035. Trademarks Adaptec, the Adaptec logo, and Adaptec Storage Manager are trademarks of Adaptec, Inc., which may be registered in some jurisdictions. Microsoft and Windows are trademarks of Microsoft Corporation in the US and other countries, used
  • Adaptec 2230SLP | User Guide - Page 3
    Software in machine readable form solely for back-up purposes, provided you reproduce Adaptec's copyright proprietary legends. Notwithstanding the foregoing, the Software may be used on the home, laptop or other secondary computer of the principal user of the Software, and an additional copy of the
  • Adaptec 2230SLP | User Guide - Page 4
    Contents Getting Started with the Command Line Utility Installing the Command Line Utility 7 Installing on Windows 7 Installing on Linux 7 Installing on NetWare 7 Installing on OpenServer and UnixWare 8 Installing on Solaris 8 Starting the Command Line Utility 9 Using the Command Line Utility
  • Adaptec 2230SLP | User Guide - Page 5
    Contents ● 5 HRCONF Commands 23 hrconf backup 23 hrconf create 24 hrconf delete 24 hrconf getconfig 25 hrconf getstatus 25 hrconf getversion 25 hrconf identify 26 hrconf rescan 26 hrconf restore 26 hrconf romupdate 27 hrconf setboot 27 hrconf setconfig 27 hrconf setstate 28 hrconf task
  • Adaptec 2230SLP | User Guide - Page 6
    rebuild an affected logical drive ● Flashes new firmware and BIOS onto the controller ● Enables the controller to check the removal and connection of any disk drives ● Restores the controller configuration (HRCONF only) ● Automatically update Windows drivers (ARCCONF only) ● Provides access to the
  • Adaptec 2230SLP | User Guide - Page 7
    must remain there. Installing on Windows To install ARCCONF or HRCONF on Windows systems: 1 Start the computer. 2 After Windows starts, insert the Adaptec Storage Manager CD. 3 When the installation program starts, follow the on-screen instructions. Installing on Linux To install ARCCONF or HRCONF
  • Adaptec 2230SLP | User Guide - Page 8
    OpenServer 6) 4 Follow the instructions on the screen to complete the installation. 5 Unmount the CD drive: umount /mnt Installing on Solaris Note: HRCONF is not supported by systems running Solaris. To install ARCCONF on Solaris systems: 1 Insert the Adaptec Storage Manager Installation CD. The CD
  • Adaptec 2230SLP | User Guide - Page 9
    ARCCONF or HRCONF, enter one of the following commands: ● Windows-c:\\.exe ● Linux-/usr//
  • Adaptec 2230SLP | User Guide - Page 10
    mode. With interactive mode, enter commands at the prompt. In batch mode, create scripts and run the script in the appropriate shell. For example: Environment Windows Linux/Unix Batch File .bat .sh Run Script CMD.EXE sh / bash In either mode, if your command fails, you immediately see an error
  • Adaptec 2230SLP | User Guide - Page 11
    or disables the copyback feature, which attempts to keep drives in the original slot order after rebuilds. Syntax ARCCONF COPYBACK Parameters Controller# is the controller number On enables the copyback feature Off disables the copyback feature Example ARCCONF COPYBACK 1 ON
  • Adaptec 2230SLP | User Guide - Page 12
    back enabled (when protected by a battery) Size indicates the size of the logical drive in megabytes. Use MAX to set size to available space. RAID# indicates the RAID level for the new logical drive. 0, 1, 1E, 10, 5, 5EE, 50, 6, 60, and volume are supported. Channel# Drive# lists the space-delimited
  • Adaptec 2230SLP | User Guide - Page 13
    Controller#> LOGICALDRIVE [noprompt] ARCCONF DELETE LOGICALDRIVE ALL [noprompt] Parameters Controller# is the controller arcconf driverupdate Updates Windows device drivers. When given a directory name, it will attempt to update a driver to the version found
  • Adaptec 2230SLP | User Guide - Page 14
    drives, and physical devices. This information can include (but is not limited to) the following items: ● Controller type ● BIOS, boot block, device driver, and firmware versions ● Logical drive status, RAID level, and size ● Physical device type, device ID, presence of PFA ● Physical device state
  • Adaptec 2230SLP | User Guide - Page 15
    CLEAR-Optional, clears the specified controller log. Syntax ARCCONF GETLOGS [clear] Parameters Controller# is the controller number Type is one of the for both ARCCONF commands and commands issued from the Adaptec Storage Manager. 2 GETSTATUS reports verify, clear, initialize
  • Adaptec 2230SLP | User Guide - Page 16
    ● 16 arcconf getversion Lists version information for all controllers or a specific controller's software components, including information about the BIOS, driver, firmware currently running, and firmware that will run after a reboot. Note: The firmware version that will run after a reboot is called
  • Adaptec 2230SLP | User Guide - Page 17
    (Online Capacity Expansion). Can be used to make mirrored sets. Syntax MODIFY FROM TO [Options] [CHANNEL# DRIVE#] [noprompt] Parameters Controller# is the controller number From indicates that the logical drive to be modified will follow
  • Adaptec 2230SLP | User Guide - Page 18
    ARCCONF RESCAN Parameters Controller# is the controller number Example ARCCONF RESCAN 1 arcconf romupdate Allows new firmware and BIOS to be flashed to the controller. A reboot is required for the new firmware to take effect. Note: 1 This function is only supported in Windows and Linux
  • Adaptec 2230SLP | User Guide - Page 19
    mode> Parameters Controller# is the controller number LogicalDrive# is the number of the logical drive whose cache will be altered Logical drive cache modes: ● RON - read cache on ● ROFF - read cache off ● WT - write through disabled ● WB - write back enabled ● WBB - write back battery enabled (when
  • Adaptec 2230SLP | User Guide - Page 20
    for confirmation. Example ARCCONF SETCONFIG 1 DEFAULT arcconf setname Renames a logical drive. Syntax ARCCONF SETNAME LOGICALDRIVE Parameters Controller# is the controller number LogicalDrive# is the number of the logical drive to be renamed New Name is the
  • Adaptec 2230SLP | User Guide - Page 21
    1 DEVICE 0 0 RDY LOGICALDRIVE 2 arcconf snapshot Create or manage a logical drive snapshot. Syntax ARCCONF SNAPSHOT ... [noprompt] Parameters Controller# is the controller number Commands: ● map-display logical drives and any snapshot state. ● stop -Remove the
  • Adaptec 2230SLP | User Guide - Page 22
    #> LOGICALDRIVE [noprompt] TASK STOP LOGICALDRIVE TASK START DEVICE [noprompt] TASK STOP DEVICE Parameters Controller# is the controller number LogicalDrive# is the number of the
  • Adaptec 2230SLP | User Guide - Page 23
    hrconf backup For large-scale deployments, stores the current controller and disk drive configuration setting to a specific file. of controller, same number and type of disk drives with same IDs and channels. Syntax HRCONF BACKUP Parameters Controller# is the controller
  • Adaptec 2230SLP | User Guide - Page 24
    > [CHANNEL# DRIVE#] ... [noprompt] Parameters Controller# is the controller number Options indicates the logical drive with the following options: ● Stripesize-Optional parameters for specifying a stripe size. STRIPE is specified in kilobytes: 16, 32, and 64 are supported
  • Adaptec 2230SLP | User Guide - Page 25
    not limited to) the following items: ● Controller type ● Logical drive status, RAID level, and size ● Physical device type, device ID, presence of PFA ● Physical device state Syntax HRCONF GETCONFIG [AD/LD/PD/AL] Parameters Controller# is the controller number AD/LD/PD/AL options: ● AD
  • Adaptec 2230SLP | User Guide - Page 26
    controller. Syntax HRCONF IDENTIFY LOGICALDRIVE HRCONF IDENTIFY DEVICE Parameters Controller# is the controller rescan Enables the controller to check for controller Controller#> [noprompt] Parameters Controller# is the controller
  • Adaptec 2230SLP | User Guide - Page 27
    is only available on systems running Windows or Linux. Updates the controller or enclosure firmware. The ROM image file must be in the same directory prior to invoking hrconf. Syntax HRCONF ROMUPDATE [CONTROLLER] Parameters Controller# is the controller number Filename is the
  • Adaptec 2230SLP | User Guide - Page 28
    task Performs a task on a logical drive. Syntax HRCONF TASK START LOGICALDRIVE [noprompt] HRCONF TASK STOP LOGICALDRIVE Parameters Controller# is the controller number. LogicalDrive# is the number of the logical drive in which the
  • Adaptec 2230SLP | User Guide - Page 29
    Adaptec, Inc. 691 South Milpitas Boulevard Milpitas, CA 95035 USA ©2006 Adaptec, Inc. All rights reserved. Adaptec and the Adaptec logo are trademarks of Adaptec, Inc. which may be registered in some jurisdictions. Part Number: CDP-00092-03-A Rev A JB 09/06
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
User’s Guide
Command Line Utility
for Internal RAID Storage