Arlo Go 2 User Manual

Arlo Go 2 Manual

Get Arlo Go 2 PDF manuals and user guides View all Arlo Go 2 manuals
Add to My Manuals
Save this manual to your list of manuals

Arlo Go 2 manual content summary:

  • Arlo Go 2 | User Manual - Page 1
    Go 2 WiFi/LTE Security Camera User Manual
  • Arlo Go 2 | User Manual - Page 2
    Get to Know Your Arlo Go 2 Camera 5 Get the Arlo app...5 Meet your Go 2 Camera...6 Accessories...7 2. Get Started 8 Mobile network requirements...8 Go 2 can connect via mobile or WiFi 8 Install a SIM card into your Go 2 Camera 9 Use the Arlo app to set up your Go 2 Camera 10 Check the
  • Arlo Go 2 | User Manual - Page 3
    Arlo Go 2 LTE/WiFi Security Camera 5. Use Your Go 2 Camera 30 View your camera feeds...31 Record clips from live video...31 Take a snapshot from live video...31 Turn the camera spotlight on and off manually 32 Motion detection activity zones...33 2-Way Audio...34 Turn the camera's siren on
  • Arlo Go 2 | User Manual - Page 4
    's battery life 60 10. Arlo Connect 61 Use Arlo with Amazon Alexa...61 Add your camera to the Google Assistant app 62 Use Arlo with IFTTT...63 11. Troubleshooting 64 Scan a QR code during setup...64 Arlo doesn't discover your camera during setup 65 Firmware updates...66 Go 2 Camera
  • Arlo Go 2 | User Manual - Page 5
    version. To find out if an update is available, go to the app store and search for Arlo. 1 Mobile broadband access requires a compatible SIM card and wireless service plan. Additional restrictions and data charges may apply. Coverage and service are dependent on the carrier. 2 For information about
  • Arlo Go 2 | User Manual - Page 6
    Go 2 Camera Your Go 2 Camera includes these components. Microphone Spotlight Camera lens Status LED Light sensor Speaker Screw mount hole Sync button Weather-resistant camera housing Charging port Release button SIM card slot Micro SD card slot Get to Know Your Arlo Go 2 Camera 6 User Manual
  • Arlo Go 2 | User Manual - Page 7
    much cloud recording is available? Accessories Your Go 2 Camera works with these accessories, which are sold separately: • Solar Panel Charger. Connect an Arlo Solar Panel charger to your camera and harvest power from the sun to keep your camera battery charged. See Solar Panel charging on page 58
  • Arlo Go 2 | User Manual - Page 8
    your Arlo account. Arlo Go 2 can also connect over WiFi as other Arlo cameras do. For best results when connecting to the mobile network, Arlo an internet service outage. Connecting Go 2 to WiFi works well when: • The WiFi signal is strong at the Go 2 Camera location. • Your Go 2 Camera mainly
  • Arlo Go 2 | User Manual - Page 9
    affect battery life. See Control whether your Go 2 Camera connects to mobile or WiFi on page 19. Install a SIM card into your Go 2 Camera Your Arlo Go 2 Camera requires an activated SIM card with a mobile data plan to access the mobile network. For help with your Go 2 mobile service plan, contact
  • Arlo Go 2 | User Manual - Page 10
    your Go 2 Camera We recommend that you charge the battery before mounting your camera. The indoor charging cable that came with your camera works with most power adapters. 1. Download the Arlo app on your smartphone or tablet. 2. Open the Arlo app. 3. Tap Add Device. Get Started 10 User Manual
  • Arlo Go 2 | User Manual - Page 11
    Camera 4. Follow the Arlo app instructions to add your Arlo Go 2 Camera. During the setup process, the Arlo app: • Detects the • Guides you through camera positioning. 5. Place your Arlo Go 2 Camera in a location with good mobile network coverage. Note: If you want your Arlo Go 2 Camera User Manual
  • Arlo Go 2 | User Manual - Page 12
    battery power. • Fast blinking blue: The camera's charging cable is plugged in to a power adapter or the camera is connected to the optional Arlo Solar Panel strength. Optimize mobile broadband connectivity for your Go 2 Camera • Check your service provider's data coverage map for the area Manual
  • Arlo Go 2 | User Manual - Page 13
    from your service provider. Mount your Arlo Go 2 Camera You can mount your Arlo Go 2 Camera on a wall or ceiling. Before you mount your camera, make sure you've found a good location for LTE signal strength and motion detection. Note: You must follow the instructions in the Arlo app when you
  • Arlo Go 2 | User Manual - Page 14
    Arlo Go 2 LTE/WiFi Security Camera 3. Remove the screw mount. 4. Use a 15/64 inch While holding the wall plate, use a Phillips-head screwdriver to fasten a screw into each hole. 7. Screw your Go 2 Camera clockwise into the screw mount. 8. Tilt and swivel to adjust the angle of the camera. 9. Twist
  • Arlo Go 2 | User Manual - Page 15
    Arlo Go 2 LTE/WiFi Security Camera Test motion detection You can use the motion detection test to find the right motion sensitivity setting for your camera. 1. Open the Arlo app. 2. Tap Settings > My Devices. 3. Select your camera the image, such as vehicles driving by. Get Started 15 User Manual
  • Arlo Go 2 | User Manual - Page 16
    Arlo Go 2 LTE/WiFi Security Camera To monitor motion occurring farther away, such as on might see lower-quality video while you are positioning your camera. To position your camera: 1. Open the Arlo app. 2. Tap Settings > My Devices. 3. Select the camera. 4. Tap Device Utilities > Camera Positioning
  • Arlo Go 2 | User Manual - Page 17
    Arlo Go 2 LTE/WiFi Security Camera Arm your camera to detect motion When your camera is armed, it detects motion. You can control when your camera is armed using these features: • Arm or disarm all your Arlo cameras and devices. See Arm or disarm all your Arlo devices on page 38. • Select a mode
  • Arlo Go 2 | User Manual - Page 18
    2 Camera, the Arlo app guides you through connecting the camera to the mobile LTE network and, optionally a WiFi network. LTE mobile network access To access the LTE mobile network, your Go 2 Camera requires an activated SIM card inside the Arlo Go 2 Camera. The mobile network service provider that
  • Arlo Go 2 | User Manual - Page 19
    off the Connected to WiFi Network setting in the Arlo app. (Tap Settings > My Devices, and select the camera. Tap Connected to > WiFi Network. Then toggle off Network.) This disables WiFi in your Go Camera, which conserves your camera's battery life. Constant attempts to connect with WiFi drain the
  • Arlo Go 2 | User Manual - Page 20
    Arlo Go 2 LTE/WiFi Security Camera Change your Go 2 network mode 1. Open the Arlo app. 2. Tap Settings > My Devices. 3. Select the camera. 4. Tap Connected to. 5. Select the you're using must connect to the same WiFi network as the Arlo Go 2 Camera. LTE and WiFi network connections 20 User Manual
  • Arlo Go 2 | User Manual - Page 21
    Arlo Go 2 LTE/WiFi Security Camera Many routers broadcast WiFi networks in both 2.4 GHz and 5 GHz bands, so your phone might connect to the 5 GHz WiFi band. During setup, connect your phone to your 2.4 GHz WiFi network, then connect your Go 5 GHz, ask your Internet service provider (ISP) or the Manual
  • Arlo Go 2 | User Manual - Page 22
    Arlo Go 2 LTE/WiFi Security Camera This is commonly indicated by a 2, 2.4, or 2G at the end of the network name. 5. If prompted, enter the password for . When you're connected to the WiFi network, the word Connected appears under the network name. LTE and WiFi network connections 22 User Manual
  • Arlo Go 2 | User Manual - Page 23
    push notification on the trusted device to approve or deny the log in. • SMS text message. When someone attempts to log in to your Arlo account, Arlo sends a text message to the phone number that you verified for two-step verification. Enter the security code from the text message to complete the
  • Arlo Go 2 | User Manual - Page 24
    > Login Settings > Two-Step Verification. 4. Tap the switch next to Enable. 5. Select your verification method. Note: Your Arlo account email is an automatic back-up option. 6. Follow the instructions in the app to complete your two-step verification setup. Add a phone number or device to two-step
  • Arlo Go 2 | User Manual - Page 25
    your profile You can enter your name, add a profile photo and home address, and opt-in or opt-out of Arlo news and support updates. Add a profile picture 1. Open the Arlo app. 2. Tap Settings. 3. In the ACCOUNT section, select Profile > Edit Profile. 4. Tap the profile picture at the top of the
  • Arlo Go 2 | User Manual - Page 26
    Arlo Go opt-in or opt-out of Arlo news and support updates. 1. Open the Arlo app. 2. Tap Settings. 3. Arlo password You can change your password in the Arlo app or by logging in to my.arlo.com. 1. Open the Arlo your Arlo password, you can reset it with a verified email address. 1. Open the Arlo app.
  • Arlo Go 2 | User Manual - Page 27
    Arlo Go 2 LTE/WiFi Security Camera 4. Tap Send Email. An email is sent from [email protected] to your verified email address. 5. Tap the link provided in that email. 6. Enter a new password. 7. Tap Submit. Your password is reset. Grant access to friends You can add friends to your Arlo Manually record
  • Arlo Go 2 | User Manual - Page 28
    Arlo Go 2 LTE/WiFi Security Camera Add a friend 1. Open the Arlo app. 2. Tap Settings. 3. Under ACCOUNT, tap Grant Access. 4. Tap Add or +. 5. Enter your friend's first name, last name, and email address. 6. Tap the Arlo Open the Arlo app. 2. Tap Settings. Access your Arlo account 28 User Manual
  • Arlo Go 2 | User Manual - Page 29
    Arlo Go 2 LTE/WiFi Security Camera 3. Under ACCOUNT, tap Grant Access. 4. Select the friend, and tap Edit . 5. Tap Delete Friend. 6. Tap Yes. Access your Arlo account 29 User Manual
  • Arlo Go 2 | User Manual - Page 30
    and detecting motion This Arlo camera is disarmed Tap a button to go to Devices, Library, Modes, or Settings Tap to turn the siren on and off manually Tap to view device settings for the camera Number of new recordings Camera Located below each camera icon feed Battery charge LTE signal strength
  • Arlo Go 2 | User Manual - Page 31
    Arlo Go 2 LTE/WiFi Security Camera View your camera feeds 1. Open the Arlo pan and zoom your video feed. 1. Open the Arlo app. 2. Tap Play on the camera feed. . Record clips from live video 1. Open the Arlo app. 2. Tap the camera feed image. 3. the Arlo app. 2. Tap the camera feed image. 3.
  • Arlo Go 2 | User Manual - Page 32
    Arlo Go 2 LTE/WiFi Security Camera Turn the camera spotlight on and off manually When your camera is armed and detects motion at night the spotlight turns on automatically. You can also adjust the spotlight behavior and turn it
  • Arlo Go 2 | User Manual - Page 33
    Arlo Go 2 LTE/WiFi Security Camera 5. Rotate the image. If you're using an iOS device, tap Rotate Image 180°. If you're using an Android device the desired position in the camera feed image. 7. To reposition or resize the zone, tap and hold the zone and move it. Use Your Go 2 Camera 33 User Manual
  • Arlo Go 2 | User Manual - Page 34
    slide the motion detection zone to the left. 2-Way Audio The camera includes a microphone that supports 2-Way Audio. 1. Open the Arlo app. 2. Tap the camera feed image. 3. Tap the microphone icon . 4. The first time the x on the upper-left corner of the page. Use Your Go 2 Camera 34 User Manual
  • Arlo Go 2 | User Manual - Page 35
    Arlo Go 2 LTE/WiFi Security Camera Turn the camera's siren on and off manually Your camera includes a built-in siren. You can turn this siren on and off manually and you can also set up a rule for an armed mode to specify when the siren turns on if your camera detects motion. For information
  • Arlo Go 2 | User Manual - Page 36
    3. Tap Filter in the upper left corner of the page. 4. Tap Reset. 5. Tap Done. Download recordings 1. Open the Arlo app. 2. Tap Library. 3. Tap a recording. 4. Tap Download. 5. Tap OK to confirm. Make a recording a favorite 1. Open the Arlo app. 2. Tap Library. Use Your Go 2 Camera 36 User Manual
  • Arlo Go 2 | User Manual - Page 37
    to use for research and development of Arlo products. 1. Open the Arlo app. 2. Tap Library. 3. Tap a recording. 4. Tap Donate. 5. Tap OK to confirm. Delete recordings 1. Open the Arlo app. 2. Tap Library. 3. Tap a recording. 4. Tap Delete. 5. Tap OK to confirm. Use Your Go 2 Camera 37 User Manual
  • Arlo Go 2 | User Manual - Page 38
    want to turn on a different mode when you're away on vacation. Modes let you tell your cameras to respond differently at different times. The Arlo app comes with these modes: Armed. Detection is on for this camera. Disarmed. Detection is off for this camera. Schedule. Manage detection based on
  • Arlo Go 2 | User Manual - Page 39
    Arlo Go set modes to activate according to a schedule. 1. Open the Arlo app. 2. Tap Mode. 3. Select your camera. A list of notifications from the Arlo app. If you use Arlo Secure, you can also : 1. Open the Arlo app. 2. Tap Settings unmute notifications 1. Open the Arlo app. 2. Tap Settings
  • Arlo Go 2 | User Manual - Page 40
    Arlo Go 2 LTE/WiFi Security Camera Rules for modes Each mode uses one or more rules to control your Arlo system. You can set these options. • Trigger device. The trigger device is the camera that detects color at night rather than in traditional black-and- Modes, Rules, and Alerts 40 User Manual
  • Arlo Go 2 | User Manual - Page 41
    Arlo Go 2 LTE/WiFi Security Camera white. You can turn the spotlight on and off and you can adjust the spotlight behavior and brightness. Note: You can manually turn the spotlight on and off at any time from the camera feed by tapping Spotlight . You can also use the Low Light settings to
  • Arlo Go 2 | User Manual - Page 42
    Arlo Go on. To schedule when your camera responds to motion triggers: 1. Open the Arlo app. 2. Tap Mode. 3. Tap the camera. A list of modes displays then add 12:00 a.m. to 6:00 a.m. 8. Tap Done. Edit a schedule 1. Open the Arlo app. 2. Tap Mode. 3. Tap the camera. A list of modes displays. 4. Tap
  • Arlo Go 2 | User Manual - Page 43
    device that you plan to enable for geofencing. For Arlo Geofencing to work on your device, you must adjust the settings on your Android or iOS mobile device as follows: Android devices • Location permission = On • Location services = On • Battery saver = Off • Data limit = Off Modes, Rules, and
  • Arlo Go 2 | User Manual - Page 44
    Arlo Go 2 LTE/WiFi Security Camera • Airplane mode = Off • Push notifications = Enabled iOS (Apple) devices • Share my location = On • Location services = Always • Airplane mode = Off • Push notifications = Enabled • select Disarmed while they're home. Modes, Rules, and Alerts 44 User Manual
  • Arlo Go 2 | User Manual - Page 45
    Arlo Go 2 LTE/WiFi Security Camera If you use more than one enabled mobile device, you might be asked to select an Arlo device to connect it to. 10. To select the preferred mobile device, tap the device and then tap Next. 11. Tap Save. For troubleshooting tips, see Troubleshoot Arlo Geofencing on
  • Arlo Go 2 | User Manual - Page 46
    Arlo Go 2 LTE/WiFi Security Camera Enable or disable geofencing for friends' mobile devices 1. Open the Arlo Set up Arlo Geofencing on page 43. Custom modes You come with the Arlo app and give the camera is armed on page 42. Add a mode 1. Open the Arlo app. 2. Tap Mode. 3. Tap the camera. A list of
  • Arlo Go 2 | User Manual - Page 47
    Arlo Go 2 device detects motion. You can select the same Arlo device you're using as a trigger or a different Arlo device. 10. Select an action such as Record . Select the notifications for Arlo to send when motion is detected and then tap Next. 12. Review your settings and tap Save. Modes, Rules
  • Arlo Go 2 | User Manual - Page 48
    > My Devices and select the camera • Tap the Menu icon or the Device Settings icon below the camera feed. Change the camera name 1. Open the Arlo app. 2. Tap Settings > My Devices. 3. Tap the camera. 4. Tap Edit next to the camera name. 5. Enter a new name that reminds you of the camera's location
  • Arlo Go 2 | User Manual - Page 49
    Life. Using the Best Battery Life setting reduces the WiFi bandwidth that is required. 1. Open the Arlo app. 2. Tap Settings > My Devices. 3. Tap the camera. 4. Tap Video Settings > Power Management. 5. Tap to select Best Video, Optimized, or Best Battery Life. Change the Low Light settings The Go
  • Arlo Go 2 | User Manual - Page 50
    Arlo Go 2 LTE/WiFi Security Camera Note: You can manually turn the spotlight on and off at any time . When the Spotlight setting is set to the On position, the spotlight automatically turns on when your Arlo camera detects motion at night. • Color. Toggle color video recording at night on and off.
  • Arlo Go 2 | User Manual - Page 51
    Arlo Go 2 LTE/WiFi Security Camera Adjust the flicker setting The combination of certain artificial light sources and the camera shutter speed might cause flickering in the recorded video. The default setting is Auto, but you can change the flicker adjustment. 1. Open the Arlo app. 2. Tap Settings
  • Arlo Go 2 | User Manual - Page 52
    to format the micro SD card. See Format a micro SD card on page 54. Install a micro SD card in your Go 2 Camera 1. Bring the Arlo Go 2 Camera indoors. We recommend that you bring your camera indoors before removing its housing to avoid potentially exposing the inside of the camera to water
  • Arlo Go 2 | User Manual - Page 53
    Arlo Go clicks. View the SD card status 1. Open the Arlo app. 2. Tap your Go 2 Camera. 3. Check the SD card icon . The Arlo app also notifies you if the card Arlo app notifies you if the SD card is getting full, but you can also view the available storage. 1. Open the Arlo app. 2. Tap your Go
  • Arlo Go 2 | User Manual - Page 54
    overwrite setting toggles off and on. Format a micro SD card The Arlo app displays a message to let you know if you need to format the SD card. The Go 2 Camera can format the SD card. 1. Open the Arlo app. 2. Tap your Go 2 Camera. 3. Tap Storage Settings > SD Card Recording. 4. Tap the red Format
  • Arlo Go 2 | User Manual - Page 55
    on the card might be corrupted. 1. Open the Arlo app. 2. Tap your Go 2 Camera. 3. Tap Storage Settings > SD Card SD Card progress message to close. 6. Bring the Arlo Go 2 Camera indoors. We recommend that you bring your card until it ejects. Arlo SD card recording is disabled until you install an SD
  • Arlo Go 2 | User Manual - Page 56
    Security Camera View videos on a micro SD card To view Arlo videos saved on a micro SD card, you must remove the micro SD card from your Go 2 Camera and use a micro SD card reader. (See Remove a micro SD card a free universal multimedia player, such as VLC. SD Card Storage 56 User Manual
  • Arlo Go 2 | User Manual - Page 57
    and can be fully charged indoors using the charging cable that came in the package or by using other Arlo accessories, which are sold separately. Insert the camera battery 1. Bring the Arlo Go 2 Camera indoors. 2. Press the button on the magnetic charging port to release the camera from its housing
  • Arlo Go 2 | User Manual - Page 58
    the battery without removing it from the camera. 1. Snap the magnetic indoor charging cable onto the Go 2 Camera's charging port. The charging cable works with most AC power adapters. 2. Connect an AC power adapter to the charging cable and plug it in. Solar Panel charging You can use the Arlo Solar
  • Arlo Go 2 | User Manual - Page 59
    on a hard surface, might cause damage to the battery or the Arlo device. If you suspect damage to the battery or the Arlo device, replace it. • ALWAYS follow the directions in the Quick Start Guide and/or written in the Arlo Product User Manual. • ALWAYS follow local waste and recycling laws and
  • Arlo Go 2 | User Manual - Page 60
    Arlo Go 2 LTE/WiFi Security Camera Optimize your camera's battery life Arlo battery-powered cameras are not intended for continuous recording. The battery life of your Arlo camera varies depending on usage. Note: Cold temperatures can affect any battery's capacity because of its chemistry. This
  • Arlo Go 2 | User Manual - Page 61
    on and connected to the cloud. Enable the Arlo skill in one of these ways: • Tell Amazon Alexa, "Alexa, enable Arlo skill" to receive instructions in your Alexa app to link your Arlo account with your Alexa account. • In the Alexa app, search for the Arlo Skill and select Enable Skill to link your
  • Arlo Go 2 | User Manual - Page 62
    device's home screen. • "Alexa, go home." Return to your device's home Arlo icon from the list of device options. You can search for Arlo or scroll down to find Arlo on the list of devices. 6. Sign in with your Arlo account. Your camera is added to Google Assistant. Arlo Connect 62 User Manual
  • Arlo Go 2 | User Manual - Page 63
    Use Arlo with IFTTT You can use the Arlo app with IFTTT (If This Then That), a free cloud-based service that connects smart home devices and applications. To add Arlo to your IFTTT app, visit ifttt.com/arlo. To learn more about Arlo and IFTTT, visit arlo.com/community. Arlo Connect 63 User Manual
  • Arlo Go 2 | User Manual - Page 64
    11. Troubleshooting Scan a QR code during setup During setup, the camera must scan a QR code from the Arlo app when you're your mobile device's camera permissions. On your Android or iOS device, ensure that the Arlo app has access to the phone's camera in device settings. • Try using a mobile
  • Arlo Go 2 | User Manual - Page 65
    mobile network if your Go 2 Camera does not connect via WiFi. • You hear a chime noise, which indicates your camera successfully scanned the QR code. If you don't hear a chime noise and need help with scanning the QR code, see Scan a QR code during setup on page 64. Troubleshooting 65 User Manual
  • Arlo Go 2 | User Manual - Page 66
    off, always make sure that you can view your camera live from the Arlo app or a web browser before interrupting power to the camera. If you remove the battery or otherwise interrupt power while a firmware update is in progress, your camera might become unusable. Troubleshooting 66 User Manual
  • Arlo Go 2 | User Manual - Page 67
    Arlo Go 2 LTE/WiFi Security Camera Update the Go 2 Camera firmware manually 1. Open the Arlo app. 2. Tap Settings > My Devices. 3. Select the camera that you want to update. 4. Tap Device Info > Firmware > Update. WARNING: Do not release the camera from its housing or remove the battery while your
  • Arlo Go 2 | User Manual - Page 68
    the battery's charge level is 25 percent, the Arlo app displays a notification message. At 15 percent, the app sends you an email and a push notification. See the following sections for help troubleshooting network connections. Troubleshoot streaming with an LTE only connection Your Arlo Go 2 Camera
  • Arlo Go 2 | User Manual - Page 69
    Go 2 Camera on page 12. Troubleshoot streaming with a WiFi connection Your router might be blocking the ports to which Arlo sends data. To make sure that Arlo channel for your router, check the instructions that came with your router or contact your internet service provider (ISP) if they installed
  • Arlo Go 2 | User Manual - Page 70
    the Arlo app to receive push notifications. The Arlo app push notifications can be disabled on iOS and Android devices. 1. Tap the Settings icon for your Android device. 2. Tap Application Manager > Arlo. 3. Make sure that the Show Notifications setting is selected. Troubleshooting 70 User Manual
  • Arlo Go 2 | User Manual - Page 71
    you must follow the Arlo app setup process to use your camera after a factory reset. Reset using the sync button 1. Bring the Arlo Go 2 Camera indoors. after letting go of the sync button. 5. Insert the camera back into its camera housing until it clicks into place. Troubleshooting 71 User Manual
  • Arlo Go 2 | User Manual - Page 72
    from the Arlo app To reset your Arlo Go 2 Camera while it is connected to the cloud: 1. Open the Arlo app. 2. Tap Settings > My Devices and select the camera. 3. Tap Remove Device. 4. Tap Yes to confirm that you want to remove the Arlo Go 2 Camera from your account. Troubleshooting 72 User Manual
  • Arlo Go 2 | User Manual - Page 73
    Arlo Go 2 LTE/WiFi Security Camera Support For product updates and web support, visit http://www.arlo.com/en-us/support/. Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150 Carlsbad, CA 92008 USA Document publication date: September 2021 PN 202-50035-01 Trademarks © Arlo Technologies, Inc. Arlo,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
Go 2
WiFi/LTE Security Camera
User Manual