Asus AEC-67160 User Manual
Asus AEC-67160 Manual
 |
View all Asus AEC-67160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus AEC-67160 manual content summary:
- Asus AEC-67160 | User Manual - Page 1
AEC-7722/AEC-7726H/Q ARS-2100/2100Q/ARS-2120 ARS-2000LFS/ARS-2000LHS LVD SCSI-to-IDE Bridges User's Manual Version: 1.2 Copyright © 2006 ACARD Technology Corp. Release: October 2006 - Asus AEC-67160 | User Manual - Page 2
on the part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. ACARD and SCSIDE are the trademarks of ACARD Technology Corp. IBM is the trademark of International Business Machine Corporation. Microsoft and the Windows Logo are the registered - Asus AEC-67160 | User Manual - Page 3
already established their free of charge recycle systems of WEEE before August 13, 2005. Accordingly, ACARD has to be responsible for recycling all products exported to Germany. You can return your ACARD product that needs recycling to a local collector. WEEE Erklärung German Mit dem Ziel die - Asus AEC-67160 | User Manual - Page 4
exportés vers l'Allemagne. Vous pouvez mettre au rebut votre équipement ACARD usagé dans votre centre local de recyclage. Pour plus d'informations quipements usagés destinés au recyclage, veuillez contacter votre mairie, votre service de traitement des déchets ménagers ou le magasin où vous avez - Asus AEC-67160 | User Manual - Page 5
2.3.3 Outlines 11 Chapter 3 Hardware Installation 17 3.1 Installing AEC-67160 17 3.2 Compatibility 18 3.2.1 Supported DVD-ROMs 18 3.2.2 Supported SCSI Adapters 18 3.2.3 Supported Recording Software 18 3.2.4 Supported HDDs 19 3.3 Installing AEC-7722 19 3.3.1 5.25" DVD-ROM 19 3.3.2 Internal - Asus AEC-67160 | User Manual - Page 6
33 3.10 Jumper Setting on AEC-7726H/Q 34 3.11 Jumper Setting on ARS-2100/2100Q 34 3.12 Jumper Setting on ARS-2120 35 3.13 Jumper Setting on AEC-2000LFS 36 3.14 Jumper Setting on ARS-2000LHS 37 Chapter 4 Troubleshooting 38 4.1 Basic Troubleshooting 38 4.2 Advanced Troubleshooting of 7722 39 - Asus AEC-67160 | User Manual - Page 7
Revolutionary Technology LVD SCSIDE Bridge Manual SCSIDE® is a revolutionary new technology developed by ACARD Technology Corp. It can not ROM interface can be used as the firmware upgrade of flash ROM. In ACARD's technologies there is a perfect firmware design as well. It makes the transformation - Asus AEC-67160 | User Manual - Page 8
LVD SCSIDE Bridge Manual enjoy the advantages of SCSI. With the intelligent firmware design, you don't need to install a driver into the operating system so as to use SCSIDE® products. In the operating system it is just a SCSI device. 1.2 SCSIDE® Design Figure 1-1 The objectives of - Asus AEC-67160 | User Manual - Page 9
SCSIDE Bridge Manual 2.1 Overview Thank you for purchasing AEC-7722, AEC-7726H/Q, ARS ACARD makes the bridge more flexible, more stable in high level applications. AEC-7722 supports DVD drives. AEC-7726H/Q, ARS2100/2100Q, ARS-2120 and ARS-2000LFS support 3.5" IDE hard drives. ARS2000LHS supports - Asus AEC-67160 | User Manual - Page 10
Details 2.3.1 Package Check the following items after opening the package: l AEC-7722, AEC-7726H/Q, ARS-2100/2100Q, ARS-2120, ARS-2000LFS or ARS-2000LHS. l Y-splitter power cord (except ARS-2000LHS). l AEC-67160 SCSI adapter (optional). l 4 screws for ARS-2000LFS or ARS-2000LHS. l User's manual. 8 - Asus AEC-67160 | User Manual - Page 11
2.3.2 Specifications LVD SCSIDE Bridge Manual t AEC-7722 Environment: Temperature 0°C to 50°C for operation −20°C to 85°C for storage Humidity 15% to 90% Dimension: L 12 cm W 3.5 cm H 2.5 cmm t AEC-7726H/Q Environment: Temperature 0°C to 50°C for operation −20°C to 85°C for storage - Asus AEC-67160 | User Manual - Page 12
LVD SCSIDE Bridge Manual Dimension L 11.5 cm W 7.1 cm H 2 cm t ARS-2000LFS Environment: Temperature 0°C to 50°C for operation −20°C to 85°C for storage Humidity 15% to 90% Dimension: L 13.8 cm W - Asus AEC-67160 | User Manual - Page 13
2.3.3 Outlines LVD SCSIDE Bridge Manual 1. AEC-7722 l CN1--- 68-pin female SCSI connector. l CN2 --- 40-pin female IDE connector. l CN3 --- 4-pin power connector. l JP1 --- Refer to Figure 3-16 on page 33. l JP2 --- Refer to Figure 3-17 on page 33. CN1 JP1 left CN3 JP2 CN2 Figure 2-1 11 - Asus AEC-67160 | User Manual - Page 14
LVD SCSIDE Bridge Manual 2. AEC-7726H/Q l CN1 --- 68-pin female SCSI connector. l CN2 --- 40-pin female IDE connector. l CN3 --- 4-pin power connector. l JP1 --- Refer to Figure 3-18 on page 34. JP1 Top CN1 CN3 Figure 2-2a CN2 Figure 2-2b 12 - Asus AEC-67160 | User Manual - Page 15
LVD SCSIDE Bridge Manual 3. ARS-2100/2100Q l CN1 --- 68-pin female SCSI connector. l CN2 --- 40-pin female IDE connector. l CN3 --- 4-pin power connector. l SW1 --- Refer to Figure 3-19 on - Asus AEC-67160 | User Manual - Page 16
LVD SCSIDE Bridge Manual 4. ARS-2120 l CN1 --- 68-pin female SCSI connector. l CN2 --- 40-pin female IDE connector (Slave). l CN3 --- 40-pin female IDE connector (Master). l CN4 --- 4-pin power - Asus AEC-67160 | User Manual - Page 17
LVD SCSIDE Bridge Manual 5. ARS-2000LFS l CN1 --- 68-pin female SCSI connector. l CN2 --- 40-pin female IDE connector. l CN3 --- 4-pin power connector, for supplying power to HDD. l CN4 --- 4-pin - Asus AEC-67160 | User Manual - Page 18
LVD SCSIDE Bridge Manual 6. ARS-2000LHS l CN1 --- 68-pin female SCSI connector. l CN5 --- 44-pin female IDE connector. l CN4 --- 4-pin power connector, for supplying power to the bridge. l JP1 --- - Asus AEC-67160 | User Manual - Page 19
one. 3.1 Installing AEC-67160 Refer to the manual of AEC-67160 to install the driver before installing the SCSI adapter. If the driver on the CD is not the newest version, you need to download it from Internet onto a floppy, and then install it into your computer. The Web site of ACARD is http://www - Asus AEC-67160 | User Manual - Page 20
adapter such as AEC67160 can solve the problem. 3.2.3 Supported Recording Software In order to make an IDE DVD writer work stably and normally after being transformed into a SCSI one, it needs not only a SCSI adapter, but also fine recording software like the following ones. l ACARD Ha! CD Burner - Asus AEC-67160 | User Manual - Page 21
HDDs LVD SCSIDE Bridge Manual AEC-7726H/Q, ARS-2100/ARS-2100Q, ARS-2120 and ARS-2000LFS are designed for 3.5" HDD. ARS-2000LHS is for 2.5" DMA HDD. They have been tested, and support the following brands. 3.5" HDD l IBM HDD l MAXTOR HDD l SEAGATE HDD l WESTERN DIGITAL HDD 2.5" HDD l IBM - Asus AEC-67160 | User Manual - Page 22
LVD SCSIDE Bridge Manual 3.3.2 Internal Power Connection The large connector of the Y-splitter power cord is for most IDE devices while the small one for AEC-7722. Figure 3-2 3.3.3 Cable Connection Before connecting AEC-7722 to a DVD drive, you should tell the SCSI connector from the IDE one. On the - Asus AEC-67160 | User Manual - Page 23
LVD SCSIDE Bridge Manual 1. Find out pin 1 of CN2 on AEC-7722. 2. Find out pin 1 of the connector on the IDE DVD drive. 3. Parallel , and connect to the SCSI adapter. 5. Find out pin 1 of CN1 on AEC-7722. 6. Find out the colored pin 1 of the connector on the other end of SCSI cable, and connect to - Asus AEC-67160 | User Manual - Page 24
LVD SCSIDE Bridge Manual 3.4 Installing AEC-7726H/Q 3.4.1 3.5" HDD AEC-7726H/Q is designed for ATA hard drive. Extra accessories aren't needed. 3.4.2 Internal Power Connection There are two kinds of internal power connectors providing power to the IDE device and AEC-7726H/Q circuit board separately. - Asus AEC-67160 | User Manual - Page 25
3.4.3 Cable Connection LVD SCSIDE Bridge Manual Before connecting AEC-7726H/Q to a hard drive, you should is a new SCSI cable in the package of SCSI adapter (optional). Connect it to AEC-7726H/Q. 1. Find out pin 1 of CN2 on AEC-7726H/Q. 2. Find out pin 1 of the connector on the IDE hard drive. 3. - Asus AEC-67160 | User Manual - Page 26
LVD SCSIDE Bridge Manual 3.5 Installing ARS-2100/2100Q 3.5.1 3.5" HDD ARS-2100/2100Q is designed to meet 3.5"HDDs. Extra accessories aren't needed. 3.5.2 Internal Power Connection The large connector of the Y- - Asus AEC-67160 | User Manual - Page 27
LVD SCSIDE Bridge Manual 3.5.3 Cable Connection Before connecting ARS-2100/2100Q to a hard drive, you should tell the SCSI connector from the IDE one. On the bridge the 68- - Asus AEC-67160 | User Manual - Page 28
LVD SCSIDE Bridge Manual 3.6 Installing ARS-2120 3.6.1 3.5" HDD ARS-2120 is designed to connect two 3.5"HDDs. Extra accessories aren't needed. 3.6.2 Internal Power Connection The large connector of the Y-splitter - Asus AEC-67160 | User Manual - Page 29
3.6.3 Cable Connection LVD SCSIDE Bridge Manual Before connecting ARS-2120 to 2 hard drives, you should tell the SCSI connector from the IDE one. On the bridge the 68-pin connector is - Asus AEC-67160 | User Manual - Page 30
LVD SCSIDE Bridge Manual 3.7 Installing ARS-2000LFS 3.7.1 3.5" HDD ARS-2000LFS is designed to meet 3.5"HDDs. Put the hard drive on the bridge and connect it to the 40-pin - Asus AEC-67160 | User Manual - Page 31
LVD SCSIDE Bridge Manual Figure 3-11 3.7.3 Cable Connection Before connecting ARS-2000LFS to a hard drive, you should tell the SCSI connector from the IDE one. On the bridge the - Asus AEC-67160 | User Manual - Page 32
LVD SCSIDE Bridge Manual 5. Find out pin 1 of CN1 on ARS-2000LFS. 6. Find out the colored pin 1 of the connector on the other end of SCSI cable, and connect - Asus AEC-67160 | User Manual - Page 33
LVD SCSIDE Bridge Manual Figure 3-13 3.8.2 Internal Power Connection On ARS-2000LHS because the 44-pin CN5 supplies power to the hard drive, there is no need of a small 4-pin connector. As to CN4, the large 4-pin connector, it supplies power to the bridge. Figure 3-14 31 - Asus AEC-67160 | User Manual - Page 34
LVD SCSIDE Bridge Manual 3.8.3 Cable Connection Before connecting ARS-2000LHS to a hard drive, you should tell the SCSI connector from the IDE one. On the bridge the 68-pin - Asus AEC-67160 | User Manual - Page 35
3.9 Jumper Setting on AEC-7722 LVD SCSIDE Bridge Manual There are two jumpers on AEC-7722: JP1 and JP2. JP1 has 6 pins in 3 columns. Column 1 and 2 are for reserve, and column 3 is for single end (SE). JP2 has 14 pins - Asus AEC-67160 | User Manual - Page 36
LVD SCSIDE Bridge Manual 3.10 Jumper Setting on AEC-7726H/Q There is only one jumper on AEC-7726H/Q. JP1 has 14 pins in 7 columns. Column 1 is for ID1, column 2 for ID2, column 3 for ID4, column 4 for ID8, column 5 for RSV0, column 6 for - Asus AEC-67160 | User Manual - Page 37
LVD SCSIDE Bridge Manual 3.12 Jumper Setting on ARS-2120 SW1 is mainly used to set each device's ID number on the SCSI adatper. Give your IDE for JBOD 1 ON for Normal 2 for reserve NOTICE: In Normal mode there is no RAID functions. Please set LUN as enable. (refer to user's manual of SCSI) 35 - Asus AEC-67160 | User Manual - Page 38
LVD SCSIDE Bridge Manual 3.13 Jumper Setting on ARS-2000LFS There is one jumper on ARS-2000LFS. JP1 has 10 pins in 5 columns. Column 1 is for ID1, column 2 for - Asus AEC-67160 | User Manual - Page 39
LVD SCSIDE Bridge Manual 3.14 Jumper Setting on ARS-2000LHS There is one jumper on ARS-2000LHS. JP1 has 10 pins in 5 columns. Column 1 is for ID1, column 2 for - Asus AEC-67160 | User Manual - Page 40
LVD SCSIDE Bridge Manual Chapter 4 Troubleshooting 4.1 Basic Troubleshooting After installing AEC-7722, AEC-7726H/Q, ARS-2100/ARS-2100Q, ARS-2120, ARS-2000LFS or ARS-2000LHS, if it cannot work, check the following things. 1. Check SCSI host adapter Check - Asus AEC-67160 | User Manual - Page 41
LVD SCSIDE Bridge Manual 4.2 Advanced Troubleshooting of 7722 Here we connect AEC-7722 to RICOH MP5120A, a DVD drive, to explain the troubleshooting in operating system. At first, set the SCSI ID number on AEC-7722 as 0, and then inspect in Windows XP. 1. Check SCSI host adapter Check if the - Asus AEC-67160 | User Manual - Page 42
Bridge Manual Step 2. Double click "Control Panel". Figure 4-2 Step 3. Double click "Printers and Other Hardware". Then, double click "System" on the left. After entering "System Properties", click "Hardware", "Device Manager". Then, double click "SCSI and RAID controllers" to check if AEC-67160 - Asus AEC-67160 | User Manual - Page 43
LVD SCSIDE Bridge Manual 2. Check IDE device If you can find the IDE device connected to AEC-7722 in "Device Manager", AEC7722 has been installed successfully. If you cannot find, but see a yellow question mark, check the IDE connector on AEC-7722. It could be a bad connection or the device's - Asus AEC-67160 | User Manual - Page 44
target ID is correct. Figure 4-5 4.3 Advanced Troubleshooting of 7726H/Q Here we connect AEC-7726H/Q to Maxtor 6L040J2, a hard drive, to explain the troubleshooting in operating system. At first, set the SCSI ID number on AEC7726H/Q as 0, and then inspect in Windows XP. The same example can be also - Asus AEC-67160 | User Manual - Page 45
LVD SCSIDE Bridge Manual 1. Check SCSI host adapter Check if the displayed device on the list of devices is just the installed SCSI adapter. The steps of entering "Device Manager" are as follows. Step1. Double click "My Computer". Step 2. Double click "Control Panel". Figure 4-6 Figure 4-7 43 - Asus AEC-67160 | User Manual - Page 46
LVD SCSIDE Bridge Manual Step 3. Double click "Printers and Other Hardware". Then, double click "System" on the left. After entering "System Properties", click "Hardware", "Device Manager". Then, double click "SCSI and RAID controllers" to check if AEC-67160 adapter is installed well. Figure 4-8 2. - Asus AEC-67160 | User Manual - Page 47
LVD SCSIDE Bridge Manual Step 1. Click "Disk drives" to show your HDD in "Device Manager". Figure 4-9 45 - Asus AEC-67160 | User Manual - Page 48
LVD SCSIDE Bridge Manual Step 2. Double click to enter "General", and see if the device is working normally. Besides, you can see if the target ID is correct. Figure 4-10 46 - Asus AEC-67160 | User Manual - Page 49
Technical Support Form Email: [email protected] http://www.acard.com Model F/W Version Hard Disk Model/type Capacity Firmware version Others Problem Description - Asus AEC-67160 | User Manual - Page 50
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
 |
 |
Copyright © 2006 ACARD Technology Corp.
User’s Manual
Release: October 2006
Version: 1.2
AEC-7722/AEC-7726H/Q
ARS-2100/2100Q/ARS-2120
ARS-2000LFS/ARS-2000LHS
LVD SCSI-to-IDE Bridges