Asus Application Manual User Manual

Asus Application Manual Manual

Get Asus Application Manual PDF manuals and user guides View all Asus Application Manual manuals
Add to My Manuals
Save this manual to your list of manuals

Asus Application Manual manual content summary:

  • Asus Application Manual | User Manual - Page 1
    ASUS exclusive technology, secures the data on your hard disk and enhances hard drive performance without the hassles of complicated configurations. With its user-friendly graphical user connectors on the motherboard. Refer to manual for the exact location the motherboard do not support ATAPI
  • Asus Application Manual | User Manual - Page 2
    new hard disks for this setup. • This setup erases all original data in the hard disk connected to the SATA_E2 (white, port 1) connector on the motherboard. Ensure to back up the data in the hard disk before using this setup. To start EZ Backup configuration: 1. Click EZ Backup from the main
  • Asus Application Manual | User Manual - Page 3
    Configuring Super Speed This mode allows two hard disks to access data simultaneously. The dual channel design can largely enhance hard disk transfer rate. • We recommend that you use two new hard disks for this setup. • This setup erases all original data in both hard disks. Ensure to back up all
  • Asus Application Manual | User Manual - Page 4
    other onboard SATA connectors. When using one hard disk in Normal Mode, connect the hard disk to the SATA_E1 (orange, port 0) connector on the motherboard. To change to Normal Mode: 1. Click Mode Change to return to the main screen. 2. Click Disable to start configuration. 3. The setup is completed
  • Asus Application Manual | User Manual - Page 5
    is not available, right-click Disk item, and then select Initialize Disk to initialize the disk first. 3. A New Partition Wizard screen appears. Follow the onscreen instructions to complete the volume partition.
  • Asus Application Manual | User Manual - Page 6
    Other feature buttons Click to open the Schedule Drive Verify window Click to open the Event Log list Click to open the Setup Password window Click to open the Firmware Update window Click to open the Help menu Click to hide the setup window Click to return to the previous page Schedule Drive
  • Asus Application Manual | User Manual - Page 7
    event log list that might be helpful for troubleshooting and locating a system malfunction. Click Refresh to update the event log list; and click Ok to close the window. Setup Password Allows you to set the password for configuration access. Key in the user name and password. Click Ok to apply the
  • Asus Application Manual | User Manual - Page 8
    Express Gate on a USB flash disk drive in advance. Follow below instructions to complete the installation: 1. Plug a USB flash disk drive in motherboard. Restart the system, and launch the Express Gate. Launching Drive Xpert To open the ASUS Utility panel, click . Launch Drive Xpert from the ASUS
  • Asus Application Manual | User Manual - Page 9
    . 3. Click Next to continue the configuration. 4. All original data on the hard drive connected to the SATA_E2 (white, port 1) connector on the motherboard will be erased. Make necessary backup before proceeding. Click Next to continue. 5. The setup is completed. Click OK to close the configuration
  • Asus Application Manual | User Manual - Page 10
    Super Speed To start Super Speed configuration: 1. Click Super Speed from the main screen. 2. Check if the SATA cables and power cords are installed properly. Click Next to continue. 3. Click Next to continue the configuration. 4. Before proceeding, ensure to back up all original data in the two
  • Asus Application Manual | User Manual - Page 11
    OS Timer Reset User Data ASUS O.C. Profile AI Net 2 [Auto] [Mode Change] [Press Enter] [Press Enter] [Press Enter] [Enabled] [10 Seconds] [No] Press ENTER to run the utility to select and update BIOS. This utility doesn't support connectors on the motherboard and press the <
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
ASUS Drive Xpert
Drive Xpert, an ASUS exclusive technology, secures the data on your hard
disk and enhances hard drive performance without the hassles of complicated
configurations. With its user-friendly graphical user interface, you can easily
arrange hard drive backups or enhance the hard drive’s transfer rate.
Installing Serial ATA hard disks
For using Drive Xpert in Windows
®
operating system, we recommend that you
prepare three hard disks: one hard disk with operating system already installed, and
two hard disks for Drive Xpert configuration.
To install Serial ATA hard disks for Drive Xpert configuration:
1.
Install two SATA hard disks into the drive bays.
2.
Plug one end of the SATA signal cables to each drive, and plug the other end
of the SATA signal cables to the SATA_E1 (orange, port 0) and SATA_E2
(white, port 1) connectors on the motherboard. Refer to manual for the exact
location of the SATA connectors.
3.
Connect a SATA power cable to the power connector of each drive.
•
For optimal performance, we highly recommend that you install identical
drives of the same model and capacity.
•
The SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors on
the motherboard do not support ATAPI devices and hot-plug function.
Launching Drive Xpert in Windows
®
OS
After installing Drive Xpert from the bundled support DVD,
double-click the
Drive Xpert
icon on the Windows
®
notification area. The main screen as
shown on the right hand side appears.
There are two modes for Drive Xpert:
EZ
Backup
and
Super Speed
.
•
Before using the Drive Xpert function, ensure that you have installed the
Marvell 61xx driver in the system.
•
Ensure to install two hard disks to the SATA_E1 (orange, port 0) and
SATA_E2 (white, port 1) connectors when the Drive Xpert mode in BIOS
setup is configured as
EZ Backup
or
Super Speed
. Otherwise, the HDD
LED in the front panel flashes.