Asus KFSN4-DRE SAS iKVM IST User Guide

Asus KFSN4-DRE SAS iKVM IST Manual

Get Asus KFSN4-DRE SAS iKVM IST PDF manuals and user guides View all Asus KFSN4-DRE SAS iKVM IST manuals
Add to My Manuals
Save this manual to your list of manuals

Asus KFSN4-DRE SAS iKVM IST manual content summary:

  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 1
    Motherboard KFSN4-DRE Series KFSN4-DRE/SAS KFSN4-DRE/2S KFSN4-DRE
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 2
    written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 3
    viii About this guide ix Typography x KFSN4-DRE Series specifications summary xi Chapter 1: Product introduction 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Serial number label 1-1 1.4 Special features 1-2 1.4.1 Product highlights 1-2 1.4.2 Innovative ASUS features 1-3 Chapter 2: Hardware
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 4
    BIOS setup 4.1 Managing and updating your BIOS 4-1 4.1.1 Creating a bootable floppy disk 4-1 4.1.2 AFUDOS utility 4-2 4.1.3 ASUS CrashFree BIOS System Date [Day xx/xx/xxxx 4-8 4.3.2 System Time [xx:xx:xx 4-8 4.3.3 Floppy A [1.44 MB 3 4-8 4.3.4 IDE Configuration 4-9 4.3.5 Primary/Secondary IDE
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 5
    KFSN4-DRE/SAS model only 5-9 5.3.1 Integrated Mirroring 5-9 5.3.2 Integrated Mirroring Enhanced 5-13 5.3.3 Integrated Striping (IS) volume 5-15 5.3.4 Managing 2000/Server 2003 6-10 6.4 Management applications and utilities installation 6-13 6.4.1 Running the support CD 6-13 6.4.2 Drivers menu
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 6
    Contents 6.4.4 Utilities menu 6-14 6.4.5 Contact information 6-14 Appendix: Reference information A.1 KFSN4-DRE/SAS model block diagram A-1 A.2 KFSN4-DRE/2S model block diagram A-2 A.3 KFSN4-DRE model block diagram A-3 vi
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 7
    . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer' s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 8
    service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals stable surface. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. This symbol of
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 9
    guide is organized This user guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technologies it supports Chapter 5: RAID configuration This chapter provides instructions for setting up, creating, and configuring
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 10
    the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 11
    Series specifications summary Model Name KFSN4-DRE KFSN4-DRE/2S KFSN4-DRE/SAS Processor / System Bus 2 * socket 1207 AMD Opteron™ 2000 series processor (Barcelona Support) Quad Core / Dual Core HyperTransport™ Technology 1.0, 1GHz 512KB L2 cache/Per core, 2MB L3 Core Logic nVIDIA nForce
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 12
    KFSN4-DRE Series specifications summary Onboard I/O Connectors Rear I/O Connectors Management Solution Monitoring EMI Environment Floppy Connector PSU Connector Management pin ATX 12V power connector 1* SO-DIMM socket for optional ASMB3-SOL 1 (support 2 USB ports) 10 * 4pin 2 2 2 1 1 1 2
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 13
    This chapter describes the motherboard introPdruoc1dtuiocnt features and the new technologies it supports.
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 14
    Chapter summary 1 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Serial number label 1-1 1.4 Special features 1-2 ASUS KFSN4-DRE Series
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 15
    serial number containing 12 characters xxM0Axxxxxxx shown as the figure below. With the correct serial number of the product, ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. KFSN4-DRE xxM0Axxxxxxx Made in China 合格 ASUS KFSN4-DRE Series 1-1
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 16
    equipment up to 48 times faster than other existing technologies. DDR2 memory support The motherboard supports DDR2 memory which features data up to 10.7 GB/s. Serial Attached SCSI (SAS) technology support (KFSN4-DRE/SAS model only) SAS is the latest storage interface for enterprise
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 17
    the BIOS codes and data are corrupted. This protection eliminates the need to buy a replacement ROM chip. ASUS Smart Fan technology The ASUS Smart Fan technology smartly adjusts the fan speeds according to the system loading to ensure quiet, cool, and efficient operation. ASUS KFSN4-DRE Series 1-3
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 18
    1-4 Chapter 1: Product introduction
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 19
    This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. 2 Hardware information
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 20
    Chapter summary 2 2.1 Before you proceed 2-1 2.2 Motherboard overview 2-3 2.3 Central Processing Unit (CPU 2-9 2.4 System memory 2-13 2.5 Expansion slots 2-16 2.6 Jumpers 2-19 2.7 Connectors 2-23 ASUS KFSN4-DRE Series
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 21
    the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED ® SB_PWR1 ON Standby Power KFSN4-DRE Series Standby power LED OFF Powered Off ASUS KFSN4-DRE Series 2-1
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 22
    second to indicate that the LSI 1064E chipset is working normally. ® KFSN4-DRE Series SAS LED LED1 Blinks Normal (green) OFF Abnormal 3. CPU to indicate that there is no power in the memory DIMMs. ® KFSN4-DRE Series Onboard LED MEM_WARN1 (green) ON Abnormal OFF Normal CPU_WARN1 (green
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 23
    the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis ® KFSN4-DRE ASUS KFSN4-DRE Series 2-3
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 24
    module) DDR2 DIMM_B1 (64/72 bit, 240-pin module) DDR2 DIMM_A1 (64/72 bit, 240-pin module) FRNT_FAN5 FRNT_FAN6 VGA1 LAN1 BCM 5721 CPU1 ® KFSN4-DRE/SAS LAN2 BUZZ1 BCM 5721 CR2032 3V Lithium Cell CMOS Power CLRTC1 MEM_WARN1 AMI 8Mb FWH PCIE1 RECOVERY1 VGA_EN1 XGI Z9S LSI SAS1064E Super
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 25
    KFSN4-DRE/2S model 33cm (13in) PS/2 T: Mouse B: Keyboard USB1 USB2 REAR_FAN4 PSUSMB1 PRI_IDE1 SEC_IDE1 ATXPWR1 ATX12V1 SATA2 SATA1 SATA4 SATA3 DDR2 DIMM_C4 (64/72 bit, 240-pin module) DDR2 DIMM_D4 (64/72 bit, 240-pin module) FRNT_FAN2 30.5cm (12in) FRNT_FAN1 ASUS KFSN4-DRE Series 2-5
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 26
    DDR2 DIMM_B1 (64/72 bit, 240-pin module) DDR2 DIMM_A1 (64/72 bit, 240-pin module) FRNT_FAN5 FRNT_FAN6 VGA1 LAN1 BCM 5721 CPU1 ® KFSN4-DRE LAN2 BUZZ1 MEM_WARN1 AMI 8Mb FWH RECOVERY1 BCM 5721 CR2032 3V Lithium Cell CMOS Power CLRTC1 PCIE1 VGA_EN1 XGI Z9S Super I/O CPU_WARN1 COM2 HDLED1
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 27
    1. PS/2 mouse port (green) 2. RJ-45 port for iKVM 3. PS/2 keyboard port (purple) 4. USB 2.0 ports 1 and 2 5. Serial (COM1) port 6. Video Graphics Adapter port 7. LAN 1 (RJ-45) port 8. LAN 2 (RJ-45) port Page 2-23 2-23 2-23 2-23 2-23 2-23 2-23 2-23 ASUS KFSN4-DRE Series 2-7
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 28
    (24-pin ATXPWR1, 8-pin ATX12V1) 9. Power supply SMBus connector (5-pin PSUSMB1) 10. SAS connectors (KFSN4-DRE/SAS model only) 11. SAS LSI1064E ports LED connector (18-1 pin SASLED1) (KFSN4-DRE/SAS model only) 12. Serial General Purpose Input/Output connector (6-pin SGPIO1) 13. Auxiliary
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 29
    of the PnP cap. 2.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. CPU1 CPU1 CPU2 KFSN4-DRE Series CPU Socket 1207 Before installing the CPU, make sure that the socket box is facing toward you and the load lever is on your left. ® ASUS KFSN4-DRE Series 2-9
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 30
    2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab A Load lever PnP cap This side of the socket B box should face you. To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 31
    The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 6. Close the load plate (A), then push A the load lever (B) until it snaps into the retention tab. B ASUS KFSN4-DRE Series 2-11
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 32
    2.3.2 Installing the heatsink The AMD Opteron™ 2000 series processors require a specially designed heatsink to ensure optimum thermal condition and performance. Make sure that you use only qualified heatsink assembly. Follow these steps to install the CPU heatsink. 1. Place the heatsink on top of
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 33
    DDR DIMM socket. The figure illustrates the location of the DDR2 DIMM sockets: ® KFSN4-DRE Series 240-pin DIMM sockets 128 Pins 112 Pins DIMM_B4 DIMM_A4 DIMM_B3 DIMM_A3 DIMM_B2 DIMM_A2 DIMM_B1 DIMM_A1 DIMM_C1 DIMM_D1 DIMM_C2 DIMM_D2 DIMM_C3 DIMM_D3 DIMM_C4 DIMM_D4 ASUS KFSN4-DRE Series 2-13
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 34
    2.4.2 Memory Configurations You may install 256 MB, 512 MB, 1 GB, 2, or 4 GB registered ECC DDR2 DIMMs into the DIMM sockets using the memory configurations in this section. • For dual-channel configuration, the total size
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 35
    . • The DDR2 DIMM sockets do not support DDR DIMMs. Do not install DDR DIMMs to Support the DIMM lightly with your fingers when pressing the 1 retaining clips. The DIMM might get damaged when it flips out with 1 DDR2 DIMM notch extra force. 2. Remove the DIMM from the socket. ASUS KFSN4-DRE
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 36
    the tables on the next page. 3. Install the software drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support "Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 37
    )* System CMOS/Real Time Clock IRQ holder for PCI steering* IRQ holder for PCI steering* IRQ holder for PCI steering* PS/2 Compatible Mouse Port* Numeric Data Processor Primary IDE Channel Secondary IDE Channel * These IRQs are usually available for ISA or PCI devices. ASUS KFSN4-DRE Series 2-17
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 38
    x 16 slot (x 8link); the KFSN4-DRE/2S comes with two PCIE x 16 slot (x 8link); the KFSN4-DRE comes with one PCIE x 16 slot (x 16link). 2.5.5 BMC socket The BMC socket socket on the motherboard supports an ASUS® Server Management Board 3 Series (ASMB3). ® KFSN4-DRE Series BMC SOCKET 2-18 Chapter
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 39
    RAM (CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM ! ® CLRTC1 2 1 Normal (Default) 3 2 Clear CMOS KFSN4-DRE Series Clear RTC RAM ASUS KFSN4-DRE Series 2-19
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 40
    you to enable or disable the onboard Broadcom® BCM5721 Gigabit LAN1/2 controller. Set to pins 1-2 to activate the Gigabit LAN feature. KFSN4-DRE Series LAN setting LAN1_EN1 12 23 Enable (Default) Disable LAN2_EN1 12 23 Enable (Default) Disable 3. VGA Graphics controller setting (3-pin
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 41
    (3-pin SAS_EN1) (KFSN4-DRE/SAS model only) This jumper allows you to enable or disable the onboard LSI1064E SAS controller. Set the jumper to pins 1-2 to enable the SAS function (default). ® KFSN4-DRE Series SAS setting SAS_EN1 12 23 Enable (Default) Disable ASUS KFSN4-DRE Series 2-21
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 42
    the system to update the BIOS. 4. Shut down the system. 5. Set the jumper back to pins 1-2. 6. Turn on the system. ® RECOVERY1 12 23 Disable (Default) KFSN4-DRE Series BIOS recovery setting Enable 2-22 Chapter 2: Hardware information
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 43
    /2 mouse port (green). This port is for a PS/2 mouse. 2. RJ-45 port for iKVM. This RJ-45 port functions only when you install ASMB3/iKVM management card. 3. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. 4. USB connection ACT/LINK SPEED LED LED LAN port ASUS KFSN4-DRE Series 2-23
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 44
    connector at the back of the floppy disk drive. ® FLOPPY1 PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. KFSN4-DRE Series Floppy disk drive connector 2. IDE connectors (40-1 pin PRI_IDE1, SEC_IDE1) The onboard IDE connectors are for Ultra DMA 133/100/66 signal cables
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 45
    the IDE ribbon cable to PIN 1. KFSN4-DRE Series IDE connector 3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) Supported by the NVIDIA® nForce4™ chipset, KFSN4-DRE Series SATA connectors The actual data transfer rate depends on the speed of Serial ATA hard disks installed. ASUS KFSN4-DRE
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 46
    at the back of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 480 Mbps connection speed. USB34 Power USB PortB(-) USB PortB(+) GND NC Power USB PortA(-) USB PortA(+) GND PIN1 KFSN4-DRE Series USB connector 2-26 Chapter 2: Hardware information
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 47
    , FRNT_ FAN3, FRNT_FAN4, REAR_FAN1, REAR_FAN2, REAR_FAN3, REAR_ FAN4, REAR_FAN5, REAR_FAN6) The fan connectors support cooling fans of 350mA~2000mA (24 W max.) or a total of 1A~3.48A (41.76 of the system chassis. ® ® COM2 PIN1 KFSN4-DRE Series Serial port connector ASUS KFSN4-DRE Series 2-27
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 48
    # Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground 12V1 12V1 12V2 12V2 KFSN4-DRE Series ATX power connectors 9. Power Supply SMBus connector (5-pin PSUSMB1) This connector allows you to connect SMBus (System Management Bus) to the power supply unit to read PSU information. Devices
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 49
    RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND GND RSATA_RXP4 RSATA_RXN4 GND RSATA_TXN4 RSATA_TXP4 GND SAS1 SAS2 SAS3 SAS4 KFSN4-DRE Series SAS connectors To connect the SAS cable: Plug in the SAS cable to the SAS1-4 connector until the cable snaps in place. ASUS KFSN4-DRE Series 2-29
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 50
    ACT_LED4 ACT_LED5 ACT_LED6 ACT_LED7 FLT_LED0 FLT_LED1 FLT_LED2 FLT_LED3 GND FLT_LED4 FLT_LED5 FLT_LED6 FLT_LED7 11. SAS LSI1064E ports LED connector (18-1 pin SASLED1) (KFSN4-DRE/SAS model only) This connector is for the front panel LED port indicator that shows the SAS HDD status. SASLED1 PIN1
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 51
    PIN1 +5VSB CASEOPEN GND LOCATORLED1+ LOCATORLED1- LOCATORBTN# GND LOCATORLED2LOCATORLED2+ KFSN4-DRE Series Auxiliary panel connector 3 454 1. Front Panel SMBus (6-1 pin) This connector allows you to connect SMBus (System Management Bus) devices to the system front panel. Devices communicate
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 52
    14. System panel connector (20-1 pin PANEL1) This connector supports several chassis-mounted functions. POWERLED+ NC POWERLEDMLED+ MLEDNC +5V GND GND SPKROUT ® IDELED+ IDELEDNMIBTN# GND POWERBTN# GND NC RESETBTN# GND PANEL1 KFSN4-DRE Series System panel connector The system panel connector is
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 53
    This chapter describes the power up Powerin3g up sequence, and ways of shutting down the system.
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 54
    Chapter summary 3 3.1 Starting up for the first time 3-1 3.2 Powering off the computer 3-2 ASUS KFSN4-DRE Series
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 55
    the first time 1. After time you turned on the power, the system may have failed a power-on test. Check the jumper settings and connections or call your retailer for assistance. 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 4. ASUS KFSN4-DRE
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 56
    3.2 Powering off the computer 3.2.1 Using the OS shut down function If you are using Windows® 2000/2003 Server: 1. Click the Start button then click Shut Down. 2. Select Shut Down from the What do you want the computer to do? list box. 3. Select Shutdown Event Tracker. 4. Make sure that the Planned
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 57
    This chapter tells how to change the system settings through the BIOS Setup BIOS se4tup menus. Detailed descriptions of the BIOS parameters are also provided.
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 58
    Chapter summary 4 4.1 Managing and updating your BIOS 4-1 4.2 BIOS setup program 4-5 4.3 Main menu 4-8 4.4 Advanced menu 4-13 4.5 Server menu 4-27 4.6 Security menu 4-29 4.7 Boot menu 4-31 4.8 Exit menu 4-33 ASUS KFSN4-DRE Series
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 59
    Click Start, then select Run. d. From the Open field, type D:\bootdisk\makeboot a: assuming that D: is your optical drive. e. Press , then follow screen instructions to continue. 2. Copy the original or the latest motherboard BIOS file to the bootable floppy disk. ASUS KFSN4-DRE Series 4-1
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 60
    as shown. 1. Copy the AFUDOS utility (afudos.exe) from the motherboard support CD to the bootable floppy disk you created earlier. 2. Boot the system To update the BIOS file using the AFUDOS utility: 1. Visit the ASUS website (www.asus.com) and download the latest BIOS file for the motherboard. Save
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 61
    exact BIOS filename at the DOS prompt. 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support CD to the bootable floppy disk you created earlier. 3. Boot the system in DOS mode, then at ...... done Verifying flash .... done Please restart your computer A:\> ASUS KFSN4-DRE Series 4-3
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 62
    KFSN4DRE.ROM. Recovering the BIOS from a floppy disk To recover the BIOS from a floppy disk: 1. Turn on the system. 2. Insert the floppy disk with the original or updated BIOS file to the floppy disk drive. Download the original or the latest BIOS file for this motherboard from ASUS website (support
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 63
    This motherboard supports a programmable Serial Peripheral Interface (SPI) chip that you can update using the provided utility described in section 4.1 Managing and your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. ASUS KFSN4-DRE Series 4-5
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 64
    screen Menu items Menu bar Configuration fields General help Main Advanced System Date System Time Floppy A Server BIOS SETUP UTILITY Security Boot Exit [Wed, 07/25/2007] [11:07:30] [1.44 MB 3½"] IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 65
    menu bar have their respective menu items. System Date System Time Floppy A IDE Configuration Primary IDE Master Primary IDE Slave IDE Master System Information [Wed 07/25/2007] [11:17:09] [1.44 MB 3½"] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not ASUS KFSN4-DRE Series 4-7
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 66
    .61 (C)Copyright 1985-2006, American Megatrends, Inc. 4.3.1 System Date [Day xx/xx/xxxx] Allows you to set the system date. 4.3.2 System Time [xx:xx:xx] Allows you to set the system time. 4.3.3 Floppy A [1.44 MB 3½"] Sets the type of floppy drive installed. Configuration options: [Disabled] [360 KB
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 67
    the nVidia RAID Function is set to [Enabled]. SATA1/2 Primary/Secondary Channel [Disabled] Sets the SATA 1/2 Primary/Secondary channel as RAID. Configuration options: [Disabled] [Enabled] ASUS KFSN4-DRE Series 4-9
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 68
    ) [Auto] Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 69
    automatically detects the items in this menu. Main System Information Model Name ASUS KFN4-DRE Model ID 8053A0 ASUS-BIOS Version 1000.005 Date 07/10/2007 AGESA Version: 03.00.09 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc. ASUS KFSN4-DRE Series 4-11
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 70
    Processor Displays the installed processor information. Main Processor Information BIOS SETUP UTILITY *** CPU1 : Brand D Dual-Core AMD Opteron(tm) Processor 2212 CPU Core Number : 2 ID/uCode 040F12h/None Speed 2.20GHz Ratio Actual 11 Max 11 Cache L1/128KB L2/1024KB Revision F2 →←
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 71
    and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc. MPS Table Version [1.4] Sets the Multi-Processor System (MPS) table version. Configuration options: [1.1] [1.4] ASUS KFSN4-DRE Series 4-13
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 72
    Configuration ECC Configuration IOMMU Option Menu Memory CLK :200 MHz CAS Latency(Tcl) :3.0 RAS/CAS Delay(Trcd) :3 CLK Row Precharge Time(Trp) :3 CLK Min Active RAS(Tras) :8 CLK RAS/RAS Delay(Trrd) :2 CLK Row Cycle (Trc) :12 CLK NUMA Function [Enabled] →← Select Screen ↑↓ Select
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 73
    options: [Disabled] [Enabled] Memory Hole Remapping [Enabled] Enables memory remapping around memory hole. Configuration options: [Disabled] [Enabled] Unganged Mode support [Enabled] Enables or disables the force unganged mode. Configuration options: [Disabled] [Enabled] ASUS KFSN4-DRE Series 4-15
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 74
    appears when Memory Clock Mode is set to [Limit] or [Manual]. Memclock Value [200 MHz] Configuration options: [200 MHz] [266 MHz] [333 MHz] [400 MHz] [533 MHz] DRAM Timing Mode [Auto] Allows you to select the DRAM timing mode. Configuration options: [Auto] [DCT 0] [DCT 1] [Both] The following items
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 75
    ] Configuration options: [0 CLK] [1 CLK] [2 CLK] [3 CLK] [Auto] The following item appears when DRAM Timing Mode is set to [DCT 0], [DCT 1] or [Both]. tWTR [Auto] Configuration options: [Auto] [1 CLK Configuration options: [75ns] [105ns] [127.5ns] [195ns] [327.5ns] [Auto] ASUS KFSN4-DRE Series 4-17
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 76
    ECC Configuration Main Advanced ECC Configuration BIOS SETUP UTILITY [Enabled] Set GART size in systems without AGP, or disable altogether. Some OSes require valid GART for proper operation. If AGP is present, select appropriate option to ensure proper AGP operation. ECC Configuration [Enabled]
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 77
    (C)Copyright 1985-2006, American Megatrends, Inc. CPU Spread Spectrum [Disabled] Sets or disables the processor clock spread spectrum. Configuration options: [Disabled] [Center Spread] [Down Spread] ASUS KFSN4-DRE Series 4-19
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 78
    4.4.3 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices. Take caution when changing the settings of
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 79
    Enabled: None Enabled Disabled USB 1.1 Controller USB 2.0 Controller Legacy USB Support USB 2.0 Controller Mode BIOS EHCI Hand-Off [Enabled] [Enabled] [Enabled [Enabled] Enables or disables the BIOS EHCI hand-off support. Configuration options: [Disabled] [Enabled] ASUS KFSN4-DRE Series 4-21
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 80
    4.4.5 Peripheral Devices Configuration Advanced Peripheral Devices Configuration BIOS SETUP UTILITY OnBoard Floppy Controller Serial Port1 Address Serial Port2 Address Serial Port2 Address Parallel Port Address Parallel Port Mode Parallel Port IRQ [Enabled] [3F8/IRQ4] [2F8/IRQ3] [Normal] [378] [
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 81
    options: [Disabled] [Enabled] ACPI EMS Support [Disabled] Enables or disables the ACPI EMS support. Configuration options: [Disabled] [Enabled] ACPI MCFG Support [Enabled] Enables or disables the ACPI MCFG support. Configuration options: [Disabled] [Enabled] ASUS KFSN4-DRE Series 4-23
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 82
    4.4.7 APM Configuration This sub-menu allows you to change Advanced Power Management (APM) features. Select an item then press to display the configuration options. Advanced BIOS SETUP UTILITY APM Configuration Options Restore On AC Power Loss
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 83
    to the motherboard, the field shows N/A. Smart Fan Control [Smart Fan II] Allows you to enable or disable the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Disabled] [Smart Fan] [Smart Fan II] ASUS KFSN4-DRE Series 4-25
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 84
    The following items appear when you enable the Smart Fan Control feature. CPU1/CPU2 Target Temperature [60] Allows you to set the CPU target temperature. Configuration options: [40] [45] [50] [55] [60] [65] [70] [75] [80] [85] System1 Target Temperature [50] Allows you to set the system target
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 85
    Access [Disabled] Enables or disables the remote access feature. Configuration options: [Disabled] [Enabled] The following items appear only when Remote Access is set to [Enabled]. ASUS KFSN4-DRE Series 4-27
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 86
    Allows you to select the target terminal type. Configuration options: [ANSI] [VT100] [VT-UTF8] VT-UTF8 Combo Key Support [Disabled] Enables or disables the VT-UTF8 combo key support for ANSI or VT100 terminals. Configuration options: [Disabled] [Enabled] Media Type [Serial] Allows you to select the
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 87
    forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section 2.6 Jumper for information on how to erase the RTC RAM. After you have set a supervisor password, the other items appear to allow you to change other security settings. ASUS KFSN4-DRE Series 4-29
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 88
    Setup utility. [View Only] allows access but does not allow change to any field. [Limited] allows changes only to selected fields, such as Date and Time. [Full Access] allows viewing and changing all the fields in the Setup utility. Change User Password Select this item to set or change the user
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 89
    . The number of device items that appears on the screen depends on the number of devices installed in the system. Configuration options: [xxxxx Drive] [Disabled] ASUS KFSN4-DRE Series 4-31
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 90
    tests (POST) while booting to decrease the time needed to boot the system. When set to Set this item to [Enabled] to use the ASUS MyLogo2™ feature. Bootup Num-Lock [On] Allows you [Off] [On] PS/2 Mouse Support [Auto] Allows you to enable or disable support for PS/2 mouse. Configuration options
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 91
    that you made to the Setup program. If you made changes to fields other than System Date, System Time, and Password, the BIOS asks for a confirmation before exiting. Discard Changes This option allows you to other changes before saving the values to the non-volatile RAM. ASUS KFSN4-DRE Series 4-33
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 92
    4-34 Chapter 4: BIOS setup
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 93
    This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. 5RAID configuration
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 94
    Chapter summary 5 5.1 Setting up RAID 5-1 5.2 NVIDIA® RAID configurations 5-3 5.3 LSI Logic MPT Setup Utility (KFSN4-DRE/SAS model only)..... 5-9 ASUS KFSN4-DRE Series
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 95
    drive to a second drive. If one drive fails, the disk array management software directs all applications to the surviving drive as it contains a complete driver from the support CD to a floppy disk before you install an operating system to the selected hard disk drive. ASUS KFSN4-DRE Series 5-1
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 96
    Install the SATA hard disks into the drive bays following the instructions in the system user guide. 2. Connect a SATA signal cable to the signal connector KFSN4-DRE/SAS model, you may use the LSI1064E SAS Configuration Utility if you installed SAS hard disk drives to the SAS connector(s) supported
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 97
    SATA RAID controller integrated in the NVIDIA® nForce Professional 2200 chip. The RAID controller supports RAID 0 and RAID 1 using the four independent Serial ATA channels. 5.2.1 Entering Select [ENTER] Popup The navigation keys vary depending on the menu level or option. ASUS KFSN4-DRE Series 5-3
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 98
    Stripe Mirroring Spanning RAID 5 • The RAID mode is set to Mirroring by default. • Not all RAID modes are supported on all platforms. (This server only has two HDDs that only supports RAID 0 and RAID 1 mode.) 2. Press to select the Striping Block option, then press . The following
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 99
    2006 - Array List - Boot Yes Id Status 2 Healthy Vendor NVIDIA Array Model Name MIRROR XXX.XXG [Ctrl-X]Exit [↑↓]Select [B]Set Boot [N]New Array [ENTER]Detail ASUS KFSN4-DRE Series 5-5
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 100
    5.2.3 Rebuilding a RAID set To rebuild a RAID set: 1. From the Array List, use the up or down arrow keys to select the RAID set you want to rebuild, then press . The RAID set details appear. NVIDIA RAID Utility Mar 23 2006 - Array List - Boot Yes Yes Id Status 2 Healthy 2 Healthy Vendor
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 101
    all data on the drives if you delete a disk array! 4. The Define a New Array menu appears when you press . Create a new RAID set following the instructions in the previous sections. ASUS KFSN4-DRE Series 5-7
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 102
    5.2.5 Clearing the disk data You will lose all data when you clear a disk! To clear the disk data: 1. From the Array List, use the up or down arrow keys to select a RAID set, then press . The RAID set details appear. NVIDIA RAID Utility Mar 23 2006 - Array List - Boot No No Id Status 4
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 103
    three to ten disks, or seven mirrored disks plus two hot spare disks. The IM feature supports hot swap capability, so when a disk in an IM volume fails, you can easily restore Logic Corp. Adapter(s) disabled by user Press Ctrl-C to start LSI Logic Configuration Utility... ASUS KFSN4-DRE Series 5-9
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 104
    Logic Config Utility Adapter Properties -- SAS1064E Adapter PCI Slot PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address NVDATA Version Status Boot Order Boot Support v6.16.00.00 (2007.05.07) SAS1064E 00 04:00:00 1.22.01.00-IR 500E0101:23456712 2B.00 Enabled 0 (Enabled BIOS & OS) RAID
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 105
    Pred Disk Spr Status Fail 0003 [NO] [NO 0003 [NO] [NO 0003 [NO] [NO 0003 [NO] [NO Size (MB) 70007 70007 35003 35003 Esc = Exit Menu F1/Shift+1 = Help SPACE/+/- = Select disk for array or hot spare C = the RAID array. • The disk is already part of another array. ASUS KFSN4-DRE Series 5-11
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 106
    7. A confirmation screen appears. Press to keep existing data on the first disk. If you choose this option, data on the first disk will be mirrored on the second disk that you will add to the volume later. Make sure the data you want to mirror is on the first disk. Press to overwrite any
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 107
    PCI Slot PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address NVDATA Version Status Boot Order Boot Support SAS1064E 00 04:00:00 1.22.01.00-IR 500E0101:23456712 2B.00 Enabled 0 (Enabled BIOS & = Exit Menu F1/Shift+1 = Help Enter = Choose array type to create ASUS KFSN4-DRE Series 5-13
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 108
    add to make up the IME volume. Integrated Mirroring Enhanced (IME) supports three to ten disks, or seven mirrored disks plus two hot spare [Yes] [NO 0003 [NO] [NO 0003 [Yes] [NO 0003 [Yes] [NO Size (MB) 70007 70007 35003 35003 Esc = Exit Menu F1/Shift+1 = Help SPACE/+/- = Select disk for
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 109
    Boot Order Boot Support RAID Properties SAS Topology Advanced Adapter Properties v6.16.00.00 (2007.05.07) SAS1064E 00 04.00:00 1.22.01.00-IR 500E0101:23456712 2B.00 Enabled 0 (Enabled BIOS & OS) Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+ = Change Item ASUS KFSN4-DRE Series 5-15
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 110
    Logic Config Utility Create New Array -- SAS1064E Array Type: Array Size(MB): Slot Device Identifier Num 0 SEAGATE ST373454SS 1 SEAGATE ST373454SS 2 SEAGATE [NO 0003 [NO] [NO 0003 [Yes] [NO 0003 [Yes] [NO Size (MB) 70007 70007 35003 35003 Esc = Exit Menu F1/Shift+1 = Help SPACE/+/- = Select
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 111
    Reboot 9. The utility creates the array. LSI Logic Config Utility v6.16.00.00 (2007.05.07) Processing...may take up 1 minute Creating RAID array ASUS KFSN4-DRE Series 5-17
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 112
    and IME volumes. Refer to this section to view volume properties, manage the hot spare disk, synchronize the array, activate the array, and /Dev/Func) MPT Firmware Revision SAS Address NVDATA Version Status Boot Order Boot Support SAS1064E 00 04:00:00 1.22.01.00-IR 500E0101:23456712 2B.00 Enabled
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 113
    pressing . LSI Logic Config Utility View Array -- SAS1064E Array Identifier Type Scan Order Size(MB) Status Manage Array v6.16.00.00 (2007.05.07) 1 of 1 LSILOGICLogical Volume 3000 IME Select Item Alt+N=Next Array C = Create an array Size (MB) 34331 34331 34331 ASUS KFSN4-DRE Series 5-19
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 114
    Managing hot spares You may configure one disk as a global hot spare to protect critical data on the IM/ IME volume(s). You may create the hot spare disk at the same time Utility View Array -- SAS1064E Array Identifier Type Scan Order Size(MB) Status Manage Array v6.16.00.00 (2007.05.07) 1 of
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 115
    Order Size(MB) Status Manage Hot Spare Synnchronize Array Activate Array Delete Array v6.16.00.00 (2007.05.07) LSILOGICLogical Volume 3000 IME 0 51498 Optimal Esc = Exit Menu Enter = Select Item F1/Shift+1 = Help 3. Press to begin the synchronization, or to cancel. ASUS KFSN4-DRE Series
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 116
    is preserved on the primary disk. To delete an array: 1. From the Manage Array screen, select Delete Array, then press . LSI Logic Config Utility Manage Array -- SAS1064E Identifier Type Scan Order Size(MB) Status Manage Hot Spare Synnchronize Array Activate Array Delete Array v6.16.00.00
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 117
    PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address NVDATA Version Status Boot Order Boot Support RAID Properties SAS Topology Advanced Adapter Properties v6.16.00.00 (2007.05.07) SAS1064E 00 Controller Esc=Exit F1=Help Alt+D=Device Properties Alt+N=More Keys ASUS KFSN4-DRE Series 5-23
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 118
    , select an adapter from the Adapter List. 2. Select the SAS Topology option. The current topology is displayed. If the selection of a boot device is supported, the bottom of the screen lists the Alt+B option. This is the key for toggling the boot device. If a device is currently configured as the
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 119
    .16.00.00 (2007.05.07) Pause When Boot Alert Displayed Boot Information Display Mode Support Interrupt Restore Defaults [No] [Display adapters & installed devices] [Hook interrupt, the Default] Esc = Exit Menu F1/Shift+1 = Help Alt+N = Adapter List -/+ = Change Item ASUS KFSN4-DRE Series 5-25
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 120
    Utility Adapter List Global Properties v6.16.00.00 (2007.05.07) Pause When Boot Alert Displayed Boot Information Display Mode Support Interrupt Restore Defaults [No] [Display adapters & installed devices] [Hook interrupt, the Default] Esc = Exit Menu F1/Shift+1 = Help Alt+N = Adapter List
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 121
    .16.00.00 (2007.05.07) Pause When Boot Alert Displayed Boot Information Display Mode Support Interrupt Restore Defaults [No] [Display adapters & installed devices] [Hook interrupt, the Default] Esc = Exit Menu F1/Shift+1 = Help Alt+N = Adapter List -/+ = Change Item ASUS KFSN4-DRE Series 5-27
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 122
    5-28 Chapter 5: RAID configuration
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 123
    This chapter provides instructions for installing the necessary drivers for different system components. 6Driver installation
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 124
    Chapter summary 6 6.1 RAID driver installation 6-1 6.2 LAN driver installation 6-7 6.4 nVIDIA® driver installation 6-10 6.5 Management application and utilities installation 6-13 ASUS KFSN4-DRE Series
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 125
    independent hard disk drive or bootable array. This part provides instructions on how to install the RAID controller drivers during OS Select the optical drive as the first boot priority to boot from the support CD. Save your changes, then exit the BIOS Setup. 4. Restart the ASUS KFSN4-DRE Series 6-1
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 126
    10 64 bit Back Exit 7. Locate the RAID driver and place a blank, high-density floppy disk to the floppy disk drive. 8. Press . 9. Follow screen instructions to create the driver disk. 6-2 Chapter 6: Driver installation
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 127
    To create a RAID driver disk in Windows®: 1. Place the motherboard support CD in the optical drive. 2. When the Drivers menu appears, click nVIDIA , then insert the RAID driver disk to the floppy disk drive. 3. Follow screen instructions to install the RAID drivers. ASUS KFSN4-DRE Series 6-3
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 128
    6.1.2 Installing the RAID controller driver Windows® 2000/2003 Server OS To install the RAID controller driver when installing Windows® 2000/2003 Server OS: 1. Boot the computer using the Windows® 2000/2003 Server installation CD. The Windows® 2000/2003 Setup starts. 2. Press when the message "
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 129
    4. Insert the RAID driver disk you created earlier to the floppy disk drive, then press . 5. Select the NVIDIA RAID CLASS DRIVER (required), then press . 6. Press again at the Specigy Devices screen, then press . ASUS KFSN4-DRE Series 6-5
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 130
    7. Select NVIDIA RAID CLASS DRIVER (required), then press . The following windows appears listing both drrvers. 8. Press to continuen with Windows® 2000/2003 installation. DO NOT remove the floppy disk until the blue screen portion of Windows® 2000/2003 installation is completed. 6-6
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 131
    . Click Cancel to close this window. • If Autorun is NOT enabled in your computer, browse the contents of the support CD to locate the file ASSETUP.EXE from the BIN folder. Doubleclick the ASSETUP.EXE to run the CD. 3. Click the Broadcom 5721 Driver to begin installation. ASUS KFSN4-DRE Series 6-7
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 132
    4. Click Next when the InstallShield Wizard window appears. 5. Toggle I accept the terms in the license agreement and click Next to continue. 6-8 Chapter 6: Driver installation
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 133
    6. Click Install to start the installation. 7. Click Finish to exit the wizard when the installation is completed. ASUS KFSN4-DRE Series 6-9
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 134
    6.3 nVIDIA® driver installation This section provides the instructions on how to install the nVIDIA® Windows nFroce in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support CD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 135
    4. Click Next when the InstallShield Wizard window appears. 5. Check the box before the driver you want to install and click Next to continue. ASUS KFSN4-DRE Series 6-11
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 136
    6. Click Next to start the installation. 7. Click Finish to exit the wizard when the installation is completed. 6-12 Chapter 6: Driver installation
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 137
    management applications, and utilities that you can install to avail all motherboard features. The contents of the support CD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for updates. 6.4.1 Running the support CD Place the support ASUS KFSN4-DRE Series 6-13
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 138
    . 6.4.4 Utilities menu The Utilities menu displays the software applications and utilities that the motherboard supports. Click an item to install. 6.4.5 Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 139
    This appendix includes additional Reference informaAtion information that you may refer to when configuring the motherboard.
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 140
    Appendix summary A A.1 KFSN4-DRE/SAS model block diagram A-1 A.2 KFSN4-DRE/2S model block diagram A-2 A.3 KFSN4-DRE model block diagram A-3 ASUS KFSN4-DRE Series
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 141
    A.1 KFSN4-DRE/SAS model block diagram 2 channel DDR2 SDRAM 8 x DIMMs 2 channel DDR2 SDRAM 8 x DIMMs AMD Opteron™/ Barcelona(L1SP) CPU2 533/667MHz Port x4 USB USB USB USB LPC BUS XGI Z9Ss Winbond W83627THG-A Super I/O 8Mbit BIOS LPC PS/2 KB&Mouse 1xFloppy 2xSerial, ASUS KFSN4-DRE Series A-1
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 142
    A.2 KFSN4-DRE/2S model block diagram 2 channel DDR2 SDRAM 8 x DIMMs 2 channel DDR2 SDRAM 8 x DIMMs AMD Opteron™/ Barcelona(L1SP) CPU2 533/667MHz 64/128 bit x16 Dual-Link
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 143
    A.3 KFSN4-DRE model block diagram 2 channel DDR2 SDRAM 8 x DIMMs 2 channel DDR2 SDRAM 8 x DIMMs AMD Opteron™/ Barcelona(L1SP) CPU2 533/667MHz 64/ Port x4 USB USB USB USB LPC BUS XGI Z9Ss Winbond W83627THG-A Super I/O 8Mbit BIOS LPC PS/2 KB&Mouse 1xFloppy 2xSerial, ASUS KFSN4-DRE Series A-3
  • Asus KFSN4-DRE SAS iKVM IST | User Guide - Page 144
    A-4 Appendix A: Reference information
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Motherboard
KFSN4-DRE
Series
KFSN4-DRE/SAS
KFSN4-DRE/2S
KFSN4-DRE