Asus P8B-M User Guide

Asus P8B-M Manual

Get Asus P8B-M PDF manuals and user guides View all Asus P8B-M manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P8B-M manual content summary:

  • Asus P8B-M | User Guide - Page 1
    P8B-M Motherboard
  • Asus P8B-M | User Guide - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus P8B-M | User Guide - Page 3
    2-5 2.2.3 Motherboard layout 2-6 2.2.4 Layout contents 2-7 2.3 Central Processing Unit (CPU 2-9 2.3.1 Installing the CPU 2-9 2.3.2 Installing the CPU heatsink and fan 2-12 2.3.3 Uninstalling the CPU heatsink and fan 2-13 2.3.4 Installing the CPU heatsink in rack 2-14 2.4 System memory 2-15
  • Asus P8B-M | User Guide - Page 4
    time 3-3 3.2 Powering off the computer 3-4 3.2.1 Using the OS shut down function 3-4 3.2.2 Using the dual function power switch 3-4 Chapter 4: BIOS setup 4.1 Managing and updating your BIOS 4-3 4.1.1 ASUS CrashFree BIOS 3 utility 4-3 4.1.2 ASUS EZ Flash Utility 4-4 4.1.3 BUPDATER utility
  • Asus P8B-M | User Guide - Page 5
    the drives for data consistency 5-19 5.2.6 Deleting a RAID configuration 5-22 5.2.7 Selecting the boot drive from a RAID set 5-23 5.2.8 Enabling WriteCache 5-24 5.3 Intel® Rapid Storage Technology Option ROM Utility 5-25 5.3.1 Creating a RAID set 5-26 5.3.2 Creating a Recovery set 5-27
  • Asus P8B-M | User Guide - Page 6
    ........ 5-32 Rebuilding the RAID 5-32 Setting the Boot array in the BIOS Setup Utility 5-34 Chapter 6: Driver installation 6.1 RAID driver installation 6-3 6.1.1 Creating a RAID driver disk 6-3 6.1.2 Installing the RAID controller driver 6-6 6.2 Intel® chipset device software installation
  • Asus P8B-M | User Guide - Page 7
    installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. vii
  • Asus P8B-M | User Guide - Page 8
    not try to fix it by yourself. Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. • Before using the product, make sure all cables are correctly connected
  • Asus P8B-M | User Guide - Page 9
    Detailed descriptions of the BIOS parameters are also provided. • Chapter 5: RAID configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. • Chapter 6: Driver installation This chapter provides instructions for installing the
  • Asus P8B-M | User Guide - Page 10
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to
  • Asus P8B-M | User Guide - Page 11
    P8B-M specifications summary Processor Support / System Bus Core Logic Form Factor ASUS Features Fan Speed Control Rack Ready (Rack and Pedestal dual use) ASWM Enterprise Memory Total Slots Capacity Memory Type Expansion Total PCI/PCI-X/ Slots PCI-E Slots (follow SSI Location #)
  • Asus P8B-M | User Guide - Page 12
    P8B-M specifications summary Rear I/O Connectors Management Solution Monitoring Environment External Serial Port External USB Port VGA Port RJ-45 PS/2 KB/Mouse Software Out of Band Remote Management CPU Temperature FAN RPM 1 2 1 2 + 1 Management Port 1 ASWM Enterprise Optional ASMB5-iKVM for KVM-
  • Asus P8B-M | User Guide - Page 13
    This chapter describes the motherboard introPdruoc1dtuiocnt features and the new technologies it supports.
  • Asus P8B-M | User Guide - Page 14
    Chapter summary 1 1.1 Welcome 1-3 1.2 Package contents 1-3 1.3 Serial number label 1-4 1.4 Special features 1-4 ASUS P8B-M
  • Asus P8B-M | User Guide - Page 15
    Application CD Support CD 1 1 Documentation User Guide 1 1 Packing Qty. 3pcs per carton 10pcs per carton If any of the above items is damaged or missing, contact your retailer. Optional items ASMB5-iKVM Description Remote Management solution provides KVM over IP solution. ASUS P8B-M 1-3
  • Asus P8B-M | User Guide - Page 16
    satisfying solution to your problems. P8B-M xxS2xxxxxxxx Made in China 合格 1.4 Special features 1.4.1 Product highlights Latest processor technology This motherboard supports the latest Intel® Xeon® E3-1200/Core™ i3-2100 processors in LGA1155 package, which has memory and PCI Express controller
  • Asus P8B-M | User Guide - Page 17
    makes it an ideal memory solution. PCIe 2.0 This motherboard supports the latest PCIe 2.0 device for twice the current speed and bandwidth. This enhances system performance while still providing backward compatibility to PCIe 1.0 devices. Intel® 82574L LAN Solution The motherboard comes with dual
  • Asus P8B-M | User Guide - Page 18
    monitoring The CPU temperature is monitored to prevent overheating and damage. The system fan rotations per minute (RPM) is monitored for timely failure detection. The chip monitors the voltage levels to ensure stable supply of current for critical components. 1.4.2 Innovative ASUS features ASUS Fan
  • Asus P8B-M | User Guide - Page 19
    This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. Chapter 2: 2 Hardware information
  • Asus P8B-M | User Guide - Page 20
    Chapter summary 2 2.1 Before you proceed 2-3 2.2 Motherboard overview 2-5 2.3 Central Processing Unit (CPU 2-9 2.4 System memory 2-15 2.5 Expansion slots 2-17 2.6 Jumpers 2-21 2.7 Connectors 2-27 ASUS P8B-M
  • Asus P8B-M | User Guide - Page 21
    precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or do so may cause severe damage to the motherboard, peripherals, and/or components. ASUS P8B-M 2-3
  • Asus P8B-M | User Guide - Page 22
    you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. 2. BMC LED (BMC_LED1) heartbeat LED functions only when you install the ASUS ASMB5. 2-4 Chapter 2: Hardware information
  • Asus P8B-M | User Guide - Page 23
    removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components! 2.2.1 Placement direction When installing the motherboard, ensure that indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the
  • Asus P8B-M | User Guide - Page 24
    2.2.3 Motherboard layout 2-6 Chapter 2: Hardware information
  • Asus P8B-M | User Guide - Page 25
    RAM (CLRTC1) 2. VGA controller setting (3-pin VGA_SW1) 3. CPU Fan and Chassis Fan control setting (3-pin CPUFAN_SEL1, CHAFAN_SEL1) 4. LAN controller setting (3-pin LAN_SW1, LAN_SW2) 5. RAID configuration utility selection (3-pin RAID_SEL1) 6. Force BIOS port 6. Video Graphics Adapter
  • Asus P8B-M | User Guide - Page 26
    SATA5, SATA6 [Black]) 2. Hard disk activity LED connector (4-pin HDLED1) 3. USB connector (10-1 pin USB34, USB56; A-Type USB7) 4. CPU, front and rear fan connectors (4-pin CPU_FAN1, FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, REAR_FAN1) 5. Serial General Purpose Input/Output connector (6-1 pin SGPIO1
  • Asus P8B-M | User Guide - Page 27
    CPU) The motherboard comes with a surface mount LGA1155 socket designed for the Intel® Xeon E3-1200/Core™ i3-2100 processor. • Upon purchase of the motherboard after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the
  • Asus P8B-M | User Guide - Page 28
    the socket, ensuring that the gold triangle is on the bottom‑left corner of the socket, and then fit the socket alignment keys into the CPU notches. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the
  • Asus P8B-M | User Guide - Page 29
    6. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer. Some load plate slides under the retention knob (C). B A C 8. Insert the load lever under the retention tab. ASUS P8B-M 2-11
  • Asus P8B-M | User Guide - Page 30
    condition and performance. • When you buy a boxed Intel® processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, ensure that you use only Intel®‑certified multi‑directional heatsink and fan. • Your Intel® LGA1155 heatsink and fan assembly comes in a push
  • Asus P8B-M | User Guide - Page 31
    on the motherboard. 2. Rotate each fastener B counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. A B A A B B A 4. Carefully remove the heatsink and fan assembly from the motherboard. ASUS P8B-M 2-13
  • Asus P8B-M | User Guide - Page 32
    Installing the CPU heatsink in rack The Intel® 1155 processor requires a specially designed heatsink to ensure optimum thermal condition and performance. • Ensure that you use qualified heatsink assembly only. • Ensure that you have applied the thermal interface material to the top of the CPU before
  • Asus P8B-M | User Guide - Page 33
    memory 2.4.1 Overview The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory ECC DDR3 DIMMs into the DIMM sockets using the memory configurations in this section. UDIMM DIMM compatibility, it is recommended that you obtain memory modules from the same vendor. ASUS P8B-M 2-15
  • Asus P8B-M | User Guide - Page 34
    do so may cause severe damage to both the motherboard and the components. 1. Unlock a DIMM socket by DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket in the the DIMM from the 1 socket. 1 Support the DIMM lightly with your fingers when pressing
  • Asus P8B-M | User Guide - Page 35
    motherboard drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support "Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. ASUS P8B
  • Asus P8B-M | User Guide - Page 36
    used 10* 5 IRQ Holder for PCI Steering 11* 6 IRQ Holder for PCI Steering 12* 7 PS/2 Compatible Mouse Port 13 8 Numeric Data Processor one x16 link to CPU. This slot supports VGA cards and various server class high performance add-on cards. 2.5.6 PCI slot The PCI slot supports cards
  • Asus P8B-M | User Guide - Page 37
    slot (x16 link) PCIe x8 slot (x4 link) 2.5.7 Installing ASMB5 management card Follow the steps below to install an optional ASMB5 management card on your motherboard. 1. Locate the BMC_FW header on the motherboard. 2. Orient and press the ASMB5 management card in place. ASUS P8B-M 2-19
  • Asus P8B-M | User Guide - Page 38
    Connecting the thermal sensor cable Follow the steps below to connect the thermal sensor cable to the connector on your motherboard. 1. Locate the TR1 connector on the motherboard. 2. Connect the thermal sensor cable to the connector. 3. Place the other end of the thermal sensor cable to the device
  • Asus P8B-M | User Guide - Page 39
    the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure! If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery. ASUS P8B-M 2-21
  • Asus P8B-M | User Guide - Page 40
    switch for fan pin selection. The CPUFAN_SEL1 jumper is for the CPU fan control and the CHAFAN_SEL1 jumper is for the front fans and rear fans control. Set to pins 1-2 when using 4-pin fans or pins 2-3 when using 3-pin fans. • If you use a 4-pin fan but set the jumper to pin 2-3, the fan you
  • Asus P8B-M | User Guide - Page 41
    you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage Technology. ASUS P8B-M 2-23
  • Asus P8B-M | User Guide - Page 42
    setting (3-pin RECOVERY1) This jumper allows you to quickly update or recover the BIOS settings when it becomes corrupted. To update the BIOS: 1. Prepare a USB flash disk that contains the original or latest BIOS for the motherboard (XXXXXX.ROM) and the BUPDATER.EXE utility. 2. Set the jumper
  • Asus P8B-M | User Guide - Page 43
    is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. ASUS P8B-M 2-25
  • Asus P8B-M | User Guide - Page 44
    8 M��E�f�ir�m��w�a�r�e��fo�r�c�e��re�c�o�v�e��ry��s�e�t�t�in�g��(�3�-�p�in��M��E�_�R��E�C�O�V�E�R�Y�1��) This jumper allows you to quickly recover the Intel Management Engine (ME) firmware when it becomes corrupted. 2-26 Chapter 2: Hardware information
  • Asus P8B-M | User Guide - Page 45
    . 5. Serial (COM1) port. This 9-pin communication port is for pointing devices or other serial devices. 6. Video Graphics Adapter port. This port is for a VGA monitor or other VGAcompatible devices. 7. LAN 1 (RJ-45 connection GREEN 1 Gbps connection ACT/LINK SPEED LED LED LAN port ASUS P8B-M 2-27
  • Asus P8B-M | User Guide - Page 46
    [Black]) Supported by the Intel® C204 chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 6Gb/s of data transfer rate. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 10, or RAID
  • Asus P8B-M | User Guide - Page 47
    USB34 and USB56, then install the modules to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. ASUS P8B-M 2-29
  • Asus P8B-M | User Guide - Page 48
    4. CPU, front and rear fan connectors (4-pin CPU_FAN1, FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, REAR_FAN1) The fan connectors support cooling fans of 350 mA-740 mA (8.88 W max.) or a total of 3.15 A-6.66 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, ensuring that
  • Asus P8B-M | User Guide - Page 49
    General Purpose Input/Output connector (6-1 pin SGPIO1) This connector is used for the SGPIO peripherals for the Intel Rapid Storage Technology RAID SATA LED. 6. Thermal sensor cable connectors (3-pin TR1) This You can connect the thermal sensor cable to either pin 1-2 or pin 2-3. ASUS P8B-M 2-31
  • Asus P8B-M | User Guide - Page 50
    the serial port module cable to one of these connectors, then install the module to a slot opening at the back of the system chassis. 8. BMC header (BMC_FW1) The BMC connector on the motherboard supports an ASUS® Server Management Board 5 Series (ASMB5). 2-32 Chapter 2: Hardware information
  • Asus P8B-M | User Guide - Page 51
    . Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. This connector functions only when you install the ASUS ASMB5. 10. TPM connector (20-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital
  • Asus P8B-M | User Guide - Page 52
    plugs; otherwise, the system will not boot up. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • This motherboard supports ATX2.0 PSU or later version
  • Asus P8B-M | User Guide - Page 53
    PANEL1) This connector supports several chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. 4. Hard disk drive activity LED (2-pin the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds
  • Asus P8B-M | User Guide - Page 54
    these leads to record a chassis intrusion event. The default setting is short CASEOPEN and GND pin by jumper cap to disable the function. 4. panel. Connect the Locator LED cables to these 2-pin connector. The LEDs will light up when the Locator button is pressed. 5. Locator Button/Swich (2-pin
  • Asus P8B-M | User Guide - Page 55
    This chapter describes the power up Powerin3g up sequence, and ways of shutting down the system. Chapter 3:
  • Asus P8B-M | User Guide - Page 56
    Chapter summary 3 3.1 Starting up for the first time 3-3 3.2 Powering off the computer 3-4 ASUS P8B-M
  • Asus P8B-M | User Guide - Page 57
    LED turns on. The system then runs the power-on self-test or POST. While the tests are running, the BIOS beeps or additional messages appear on the screen. If you do not see anything power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 4. ASUS P8B-M 3-3
  • Asus P8B-M | User Guide - Page 58
    the OS shut down function If you are using Windows® 2008 Server: 1. Click the Start button, move the cursor to the triangle on the system to sleep mode or to soft-off mode, depending on the BIOS setting. Pressing the power switch for more than four seconds lets the system enter the soft-off
  • Asus P8B-M | User Guide - Page 59
    This chapter tells how to change the system settings through the BIOS Setup BIOS se4tup menus. Detailed descriptions of the BIOS parameters are also provided. Chapter 4:
  • Asus P8B-M | User Guide - Page 60
    Chapter summary 4 4.1 Managing and updating your BIOS 4-3 4.2 BIOS setup program 4-7 4.3 Main menu 4-10 4.4 Event Logs menu 4-12 4.5 Advanced menu 4-14 4.6 Monitor menu 4-25 4.7 Boot menu 4-26 4.8 Tool menu 4-28 4.9 Exit menu 4-28 ASUS P8B-M
  • Asus P8B-M | User Guide - Page 61
    the updated motherboard BIOS before using this utility. Recovering the BIOS from a USB flash drive To recover the BIOS from a USB flash drive: 1. Insert the USB flash drive with the original or updated BIOS file to one USB port on the system. 2. The utility will automatically recover the BIOS. It
  • Asus P8B-M | User Guide - Page 62
    feature allows you to update the BIOS without having to use a DOS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash Utility 1. Insert the USB flash disk that contains the latest BIOS file to the USB
  • Asus P8B-M | User Guide - Page 63
    To update the BIOS file using the BUPDATER utility: 1. Visit the ASUS website at www.asus.com and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com
  • Asus P8B-M | User Guide - Page 64
    2010 Update ROM BOARD: P8B-M VER: 0202 DATE: 12/09/2010 PATH: WARNING! Do not turn off power during flash BIOS Note Writing BIOS: DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! 5. The utility returns to the DOS prompt after the BIOS update process
  • Asus P8B-M | User Guide - Page 65
    setup program This motherboard supports a programmable firmware chip that you can update using the provided utility described in section 4.1 Managing and updating your BIOS. Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to "Run Setup." This
  • Asus P8B-M | User Guide - Page 66
    , Inc. Main Event Logs Advanced Monitor Boot Tool Exit BIOS Information BIOS Version Build Date 0202 x64 02/14/2011 Set the Date, Use Tab to switch between Data elements. CPU Information Intel(R) Xeon(R) CPU E31230 @ 3.20GHz Memory Information Total Memory 1024 MB System Date System Time
  • Asus P8B-M | User Guide - Page 67
    window with the configuration options for that item. 4.2.9 Scroll bar A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen. Press the Up/Down arrow keys or / keys to display the other items on the screen. ASUS P8B
  • Asus P8B-M | User Guide - Page 68
    Copyright (C) 2010 American Megatrends, Inc. Main Event Logs Advanced Monitor Boot Tool Exit BIOS Information BIOS Version Build Date 0202 x64 02/14/2011 CPU Information Intel(R) Xeon(R) CPU E31230 @ 3.20GHz Memory Information Total Memory 1024 MB System Date System Time Access Level [Tue 02
  • Asus P8B-M | User Guide - Page 69
    for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press . , the User Password item on top of the screen shows Not Installed. ASUS P8B-M 4-11
  • Asus P8B-M | User Guide - Page 70
    Monitor Boot Tool Boot boot. Smbios Event Log Standard Settings MECI 1 METW 60 Custom Options Log OEM Codes Convert OEM Codes log entry is updated. Use the and Window), which is the number of minutes that must pass between duplicate log entries which utilize a multiple-event counter. Use
  • Asus P8B-M | User Guide - Page 71
    OEM Codes [Disabled] Allows you to enable or disable the converting of EFI status codes to standard Smbios types. Configuration option: [Disabled] [Enabled] View Smbios Event Log Press to view the Smbios event logs. View System Event Log Press to view the system event logs. ASUS P8B
  • Asus P8B-M | User Guide - Page 72
    Monitor Boot Tool Exit ACPI Settings Trusted Computing WHEA Configuration CPU Configuration North Bridge South Bridge SATA Configuration Intel TXT( [Disabled] ACPI Sleep State [S3 (Suspend to RAM)] Enables or Disables BIOS ACPI Auto Configuration. Enable ACPI Auto Configuration [Disabled]
  • Asus P8B-M | User Guide - Page 73
    (C) 2010 American Megatrends, Inc. Advanced WHEA Support [Enabled] Enable or disable Windows Hardware Error Architecture. WHEA Support [Enabled] Allows you to enable or disable the Windows Hardware Error Architecture support. Configuration options: [Disabled] [Enabled] ASUS P8B-M 4-15
  • Asus P8B-M | User Guide - Page 74
    the BIOS automatically detects. Some items may not appear if your CPU does not support the related functions. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced CPU Configuration Includes TM1, TM2 and EMTTM Intel(R) Xeon(R) CPU E31230 @ 3.20GHz EM64T Processor Speed
  • Asus P8B-M | User Guide - Page 75
    SpeedStep Technology item to [Enabled] and allows you to enable or disable the Intel® Turbo Mode Technology. Configuration options: [Disabled] [Enabled] CPU C1E [Enabled] [Enabled] Enables the C1E support function. This item should be enabled in order to enable the Enhanced Halt State. [Disabled
  • Asus P8B-M | User Guide - Page 76
    4.5.5 North Bridge The North Bridge is built in the CPU. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced Memory Information TOTAL Memory DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 Low MMIO Align DMI Gen2 VT-d Initate Graphic Adapter 1024 MB 0 MB (DDR3 1333) 0 MB (DDR3 1333) 0 MB
  • Asus P8B-M | User Guide - Page 77
    hard disk drives, set this item to [RAID Mode]. Serial-ATA Controller 0 [Enhanced] This item appears only when you set the SATA Mode item to [IDE Mode]. Set to [Enhanced] to support two SATA 6.0 Gb/s and two SATA 3.0 Gb/s devices. Set to [Compatible] when using Windows 98/NT/2000/MS-DOS. Up to four
  • Asus P8B-M | User Guide - Page 78
    Configuration Intel TXT support only can be enabled/disabled if SMX is enabled. VT and VT-d support must also be enabled prior to TXT. Secure Mode Extensions (SMX) Enabled Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep
  • Asus P8B-M | User Guide - Page 79
    the BIOS EHCI hand-off support. Configuration manual]. Use the and keys to adjust the value. The values range from 1 to 40 with a one INTEL W82574L OpROM1 INTEL W82574L OpROM2 [PXE] [PXE] Serial Port 1 Configuration Serial Port 2 Configuration Launch Intel PXE OpROM INTEL ASUS P8B-M 4-21
  • Asus P8B-M | User Guide - Page 80
    ], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on to generate a wake event. [Enabled] Enables Ring to generate a wake event. 4-22 Chapter 4: BIOS setup
  • Asus P8B-M | User Guide - Page 81
    (which the user is using) will exchange data. Both computers should have the same or compatible settings. Terminal Type [VT-UTF8] Allows you to set the terminal type. [VT100] ASCII char set. [VT100+] Extends VT100 to support color, function keys, et. [VT-UTF8] Uses UTF8 encoding to map Unicode
  • Asus P8B-M | User Guide - Page 82
    to re-start the flow. Hardware flow control uses two wires to send start/stop signals. Configuration options: [None] [Disabled] With this mode enabled only text will be sent. This is to capture Terminal data the number of rows and columns supported on legacy OS. Configuration options BIOS setup
  • Asus P8B-M | User Guide - Page 83
    Main Event Logs Advanced Monitor Boot Tool Exit CPU Temperature(PECI) MB Temperature TR1 Temperature CPU FAN1 Speed FRNT FAN1 Speed FRNT not connected to the motherboard, the field shows N/A. Fan Speed Control [Generic Mode] Allows you to configure the ASUS Smart Fan feature that ASUS P8B-M 4-25
  • Asus P8B-M | User Guide - Page 84
    EFI Boot Boot Device Seeking 5 [On] [Enabled] [Force BIOS] [Enabled] [Disabled] [Endless PXE] Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Boot Option Priorities Boot Option #1 Boot Option #2 [IBA GE Slot 0200 v...] [Intel Volume0] Boot Override
  • Asus P8B-M | User Guide - Page 85
    the boot device during system startup, press when ASUS Logo appears. • To access Windows OS in Safe Mode, do any of the following: - Press when ASUS Logo appears. - Press after POST. Boot the SATA ports and allow you to set the booting order of the SATA devices. ASUS P8B-M 4-27
  • Asus P8B-M | User Guide - Page 86
    (C) 2010 American Megatrends, Inc. Main Event Logs Advanced Monitor Boot Tool Exit ASUS EZ Flash Utility Be used to update BIOS ASUS EZ Flash Utility Allows you to run ASUS EZ Flash BIOS ROM Utility when you press . Check section 4.1.2 ASUS EZ Flash Utility for details. 4.9 Exit menu The
  • Asus P8B-M | User Guide - Page 87
    This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. 5RAID configuration
  • Asus P8B-M | User Guide - Page 88
    Chapter summary 5 5.1 Setting up RAID 5-3 5.2 LSI Software RAID Configuration Utility 5-5 5.3 Intel® Rapid Storage Technology Option ROM Utility 5-25 ASUS P8B-M
  • Asus P8B-M | User Guide - Page 89
    The motherboard comes with the Intel® C204 controller that supports the following SATA RAID solutions: • LSI MegaRAID software RAID Configuration Utility (default) with RAID 0, RAID 1, and RAID 10 support (for both Linux and Windows OS). • Intel Rapid Storage Technology with RAID 0, RAID 1, RAID 10
  • Asus P8B-M | User Guide - Page 90
    on the motherboard. 3. Connect a SATA power cable to the power connector on each drive. 5.1.3 Setting the RAID item in BIOS You must set the RAID item in the BIOS Setup before you can create a RAID set from SATA hard disk drives attached to the SATA connectors supported by Intel® C204 chipset. To
  • Asus P8B-M | User Guide - Page 91
    difference. • When you create RAID sets with the LSI MegaRAID software RAID configuration utility, the boot priority of the SATA optical drive has to be manually adjusted. Otherwise, the system will not boot from the connected SATA ODD. 3. The utility main window appears. Use the arrow keys to
  • Asus P8B-M | User Guide - Page 92
    manually set the virtual drive parameters. Using Easy Configuration To create a RAID set using Boot Drive Rebuild Check Consistency Defines Physical Arrays. An Array Will Automatically Become A VD Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option 5-6 Chapter 5: RAID
  • Asus P8B-M | User Guide - Page 93
    connected to the SATA ports. Use the up/down arrow keys to select the drives you want to include in the RAID set, and then press
  • Asus P8B-M | User Guide - Page 94
    148.580GB POR2T # 0 DNLIN A00-00 1 DNLIN A00-01 64 KB Virtual Drive 0 RAID = 1 Units= MB Size = 152146MB DWC = Off RA = On Accept SPAN = NO RAID Level RAID 0 RAID 1 ONLINE Choose RAID Level For This VD Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option 5-8 Chapter
  • Asus P8B-M | User Guide - Page 95
    LSI Software RAID Configuration Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option 10. When creating a RAID 1 or a RAID 10 set, select DWC from the Virtual Drive menu, and then press . When creating a RAID LSI Software RAID Configuration Utility
  • Asus P8B-M | User Guide - Page 96
    , and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Configuration Menu Easy Configuration Consis0tency 1 148.580GB 2 64 KB ONLINE Select Yes Or No Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
  • Asus P8B-M | User Guide - Page 97
    RAID = 1 Units= MB Size = 152146MB DWC = Off RA = On Accept SPAN = NO 64 KB ONLINE Enter VD Size: Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option 5. Follow step 10 to 14 of the previous section: Using Easy Configuration to create the RAID set. ASUS P8B
  • Asus P8B-M | User Guide - Page 98
    configuration using the View/Add Configuration command. Adding a new RAID configuration To add a new RAID configuration: 1. From the Management Menu, select Configure > View/Add Configuration, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version
  • Asus P8B-M | User Guide - Page 99
    BIOS Version A.10.09231523R Virtual Drive(s) Configured Management Menu LD RAID Size #Stripes StripSz Status Configure Initialize 0 1 148.580GB 2 64 KB ONLINE Objects Rebuild Check Consistency Virtual Drives Virtual Drive 0 Select VD SPACE-(De)Select, F10-Initialize ASUS P8B-M 5-13
  • Asus P8B-M | User Guide - Page 100
    C.05 Sep 17, 2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured Management Menu LD RAID Size #Stripes StripSz Status Configure Initialize Objects 0 1 148.580GB 2 64 KB ONLINE Rebuild Check Consistency Initialize? Yes No Virtual Drives Virtual Drive 0 Init Will Destroy Data On
  • Asus P8B-M | User Guide - Page 101
    the Objects command To initialize the virtual drives using the Objects command 1. From the Management Menu, select Objects > Virtual Drive, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Objects Management MAednaupter Configure
  • Asus P8B-M | User Guide - Page 102
    View/Update Parameters Initilize VD Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option 4. When prompted, press the to select Yes from the Initialize? dialog box, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version
  • Asus P8B-M | User Guide - Page 103
    manually rebuild failed hard disk drives using the Rebuild command in the Management Menu. To rebuild a failed hard disk drive 1. From the Management Menu, select Rebuild, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS -View Virtual Drives ASUS P8B-M 5-17
  • Asus P8B-M | User Guide - Page 104
    drive. LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10. 09231523R REBUILD - PHYSICAL DRIVES SELECTION MENU Management Menu PORT # Configure Initialize 0 ONLIN A00-00 Objects Rebuild 1 RBLD A00-01 ReCbhueiclkdiCnognsOifstDernciyve Will
  • Asus P8B-M | User Guide - Page 105
    2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured Management Menu LD RAID Size #Stripes StripSz Status Configure Initialize 0 1 148.580GB 2 64 KB ONLINE Objects Rebuild Check Consistency Virtual Drives Virtual Drive 0 Select VD SPACE-(De)Select, F10-Check Consistency ASUS P8B
  • Asus P8B-M | User Guide - Page 106
    3. When prompted, use the arrow keys to select Yes from the Consistency Check? dialog box, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured Management Menu LD RAID Size #Stripes StripSz Status Configure
  • Asus P8B-M | User Guide - Page 107
    select Objects, and then select Virtual Drive from the sub-menu. 2. Use the arrow keys to select the virtual drive you want to check, and Consistency from the pop-up menu, and then press . 4. When prompted, use the arrow keys to select Yes from the dialog box to check the drive. 5. When checking
  • Asus P8B-M | User Guide - Page 108
    Press Enter To Select An Option 2. When prompted, use the arrow keys to select Yes from the Clear Configuration? dialog box, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Configuration Menu Easy Configuration Management MNeenwu
  • Asus P8B-M | User Guide - Page 109
    See section 5.2.1 Creating a RAID set: Using New Configuration for details. To select the boot drive from a RAID set 1. From the Management Menu, select Configure > Select Boot Drive, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R
  • Asus P8B-M | User Guide - Page 110
    manually enable the RAID controller's WriteCache option after creating a RAID (Write Through) or On(Write Back) Use Cursor Keys To Navigate Between Items And Press adapter and press . Select View/Update Parameters and press to display the BIOS Version A.10.09231523R Virtual Drive RAID
  • Asus P8B-M | User Guide - Page 111
    RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. To enter the Intel® Rapid Storage Technology option ROM utility: 1. Install all the Serial ATA hard disk drives. 2. Turn on the system. 3. During POST
  • Asus P8B-M | User Guide - Page 112
    3LS0JYL8 9LS0BJ5H Size 149.0GB 149.0GB 149.0GB 149.0GB Status Non-RAID Disk Non-RAID Disk Non-RAID Disk Non-RAID Disk Select 2 to 6 disks to use in creating the volume. [↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done 5. Use the up/down arrow keys to select a drive, and then press to
  • Asus P8B-M | User Guide - Page 113
    from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. 7. When the Capacity item is selected, enter the
  • Asus P8B-M | User Guide - Page 114
    RAID Disk Non-RAID Disk Non-RAID Disk Select 1 Master and 1 Recovery disk to create volume. [↑↓]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done 5. Use >. The following warning message appears. WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume?
  • Asus P8B-M | User Guide - Page 115
    set Take caution when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: 1. From the utility main menu, select 2. Delete RAID Volume and press . The following screen appears. Intel(R) Rapid Storage Technology - Option ROM
  • Asus P8B-M | User Guide - Page 116
    RAID and press . The following screen appears. [ RESET RAID DATA ] Resetting RAID disk will remove its RAID structures and revert it to a non-RAID Previous/Next [SPACE]-Selects [ENTER]-Selection Complete 2. Use the up/down arrow keys to select the RAID set drive(s) you want to reset, and
  • Asus P8B-M | User Guide - Page 117
    Intel(R) Rapid Storage Technology - Option ROM - 10.1.0.1008 Copyright(C) 2003-10 Intel will result in change from Continuous Update mode to On-Request. [↑↓]-Select [ESC]-Previous Menu [ENTER]-Select 2. Use [↑↓]-Up/Down [SPACE]-Selects [ENTER]-Done 3. Use the up/down arrow keys to select a drive,
  • Asus P8B-M | User Guide - Page 118
    disk: 1. At the prompt, press + to enter the Intel Rapid Storage Technology option ROM utility. 2. If there is a non-RAID SATA Hard Disk available, the utility will prompt to rebuild the RAID. Press , and then use up/down arrow keys to select the destination disk or press to
  • Asus P8B-M | User Guide - Page 119
    will be rebuilt within the operating system. [↑↓]-Select [ESC]-Exit [ENTER]-Select Menu 4. Exit Intel Rapid Storage Technology and reboot the system. 5. Under Microsoft® Windows OS, select Start > Programs > Intel Rapid Storage > Intel the RAID with other non-RAID disk. ASUS P8B-M 5-33
  • Asus P8B-M | User Guide - Page 120
    arrays when creating multi-RAID using the Intel® Rapid Storage Technology. To set the boot array in the BIOS: Set at least one of the arrays bootable to boot from the hard disk. 1. Reboot the system and press to enter the BIOS setup utility during POST. 2. Go to the Boot menu and select the
  • Asus P8B-M | User Guide - Page 121
    This chapter provides the instructions for installing the necessary drivers for different system components. Chapter 6: 6Driver installation
  • Asus P8B-M | User Guide - Page 122
    Chapter summary 6 6.1 RAID driver installation 6-3 6.2 Intel chipset device software installation 6-15 6.3 LAN driver installation 6-17 6.4 VGA driver installation 6-20 6.5 Management application and utilities installation 6-23 ASUS P8B-M
  • Asus P8B-M | User Guide - Page 123
    SAS2 Driver Write DMI FreeDOS command prompt 5. Use the arrow keys to select the type of RAID driver disk you want to create and press to enter the sub-menu. C20x INTEL RAID Driver C20x INTEL RAID Driver Windows 32 bit(also support AHCI) Windows 64 bit(also support AHCI) Back Exit ASUS P8B
  • Asus P8B-M | User Guide - Page 124
    C20x LSI RAID Driver C20x LSI RAID Driver Windows XP 32 bit Windows XP 64 bit Windows Server 2003 32 bit Windows Server 2003 64 bit Windows Vista 32 bit Windows Vista 64 bit Windows Server 2008 32 bit Windows Server 2008 64 bit Windows 7 32 bit Windows 7 64 bit Windows Server 2008 R2 64 bit RHEL AS4
  • Asus P8B-M | User Guide - Page 125
    in Windows® environment 1. Start Windows®. 2. Place the motherboard support DVD into the optical drive. 3. Go to the Make disk menu, and then select the type of RAID driver disk you want to create. 4. Insert a floppy disk into the USB floppy disk drive. 5. Follow succeeding screen instructions to
  • Asus P8B-M | User Guide - Page 126
    6.1.2 Installing the RAID controller driver During Windows® Server 2003 / XP OS installation To install the RAID controller driver when installing Windows® Server 2003 / XP OS 1. Boot the computer using the Windows® Server 2003 / XP installation disc. The Windows® Setup starts. 2. Press when
  • Asus P8B-M | User Guide - Page 127
    from the list, and then press . 6. The Windows® Setup loads the RAID controller drivers from the RAID driver disk. When the next screen appears, press to continue installation. 7. Setup then proceeds with the OS installation. Follow screen instructions to continue. ASUS P8B-M 6-7
  • Asus P8B-M | User Guide - Page 128
    2008 OS installation To install the RAID controller driver when installing Windows® Server 2008 OS 1. Boot the computer using the Windows® Server 2008 OS installation disc. Follow the screen instructions to start installing Windows Server 2008. 2. When prompted to choose a type of installation
  • Asus P8B-M | User Guide - Page 129
    Next. 7. When the system finishes loading the RAID driver, replace the motherboard Support DVD with the Windows Server installation disc. Select the drive to install Windows and click Next. 8. Setup then proceeds with the OS installation. Follow screen instructions to continue. ASUS P8B-M 6-9
  • Asus P8B-M | User Guide - Page 130
    ] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue] boot: linux dd 4. Select Yes using the key when asked if you have the driver disk, then press . Main Menu Do you have a driver disk? Yes No 5. Insert the Red Hat® Enterprise RAID driver disk to the USB floppy disk drive, select OK
  • Asus P8B-M | User Guide - Page 131
    6. When asked if you will load additional RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 7. Follow the onscreen instructions to finish the OS installation. ASUS P8B-M 6-11
  • Asus P8B-M | User Guide - Page 132
    SUSE Linux 11 OS To install the RAID controller driver when installing SUSE Linux Enterprise Server OS: 1. Boot the system from the SUSE OS installation CD. 2. Use the arrow keys to select Installation from the Boot Options menu. Boot from Hard Disk Installation Repair Installed System Rescue System
  • Asus P8B-M | User Guide - Page 133
    Media Firmware Test Memory Test Boot Options acpi=off apic=bigsmp brokenmodules=ahci F1 Help F2 Language F3 Video Mode F4 Source F5 Kernel F6 Driver English(US) 1024 X768 DVD Default Yes 5. When below screen appears, select the USB floppy disk drive (sda) as the driver update medium. Select OK
  • Asus P8B-M | User Guide - Page 134
    to the system as shown below. Please choose the Driver Update medium. sda: USB Floppy sr0: CD-ROM, ASUS DRW-1612BLT sdb: Disk, LSI MEGA RAID sd3: Disk, LSI MEGA RAID Console other device OK Back 7. Select Back and follow the onscreen instructions to finish the installation. 6-14 Chapter
  • Asus P8B-M | User Guide - Page 135
    of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 3. Click the item Intel Chipset Device Software from the menu. 4. The Intel(R) Chipset Device Software window appears. Click Next to start installation. ASUS P8B-M 6-15
  • Asus P8B-M | User Guide - Page 136
    5. Select Yes to accept the terms of the License Agreement and continue the process. 6. Read the Readme File Information and press Next to continue the installation. 7. After completing the installation, click Finish to complete the setup process. 6-16 Chapter 6: Driver installation
  • Asus P8B-M | User Guide - Page 137
    to close this window. • If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Doubleclick the ASSETUP.EXE to run the DVD. 3. Click the Intel® PRO/1000 Gigabit Adapters Driver to begin installation. ASUS P8B-M 6-17
  • Asus P8B-M | User Guide - Page 138
    the Intel(R) Network Connections-InstallShield Wizard window appears. 5. Toggle I accept the terms in the license agreement and click Next to continue. 6. Click the Intel(R) PROSet for Windows Device Manager box, and then click Next to start the installation. 6-18 Chapter 6: Driver installation
  • Asus P8B-M | User Guide - Page 139
    7. Follow the screen instructions to complete installation. 8. When finished, press Finish to continue. ASUS P8B-M 6-19
  • Asus P8B-M | User Guide - Page 140
    the instructions on how to install the ASPEED Video Graphics Adapter (VGA) driver. You need to manually install the ASPEED VGA driver on a Windows® operating system. To install the ASPEED VGA driver: 1. Restart the computer, and then log on with Administrator privileges. 2. Insert the motherboard
  • Asus P8B-M | User Guide - Page 141
    5. Toggle I accept the terms in the license agreement and click Next to continue. 6. Enter the user information and click Next to continue. 7. Select a setup type and click Next to continue. ASUS P8B-M 6-21
  • Asus P8B-M | User Guide - Page 142
    8. Click Install to start driver installation. 9. When the installation completes, click Finish to restart your computer before using the program. 6-22 Chapter 6: Driver installation
  • Asus P8B-M | User Guide - Page 143
    , and utilities that you can install to avail all motherboard features. The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for updates. 6.5.1 Running the support DVD Place the support DVD to the optical drive. The DVD automatically
  • Asus P8B-M | User Guide - Page 144
    applications and utilities that the motherboard supports. Click an item to install. 6.5.4 Make disk menu The Make disk menu contains items to create the Intel RAID and LSI MegaRAID driver disks. 6.5.5 Contact information Click the Contact tab to display the ASUS contact information. You can also
  • Asus P8B-M | User Guide - Page 145
    This appendix includes additional Reference informaAtion information that you may refer to when configuring the motherboard. Appendix:
  • Asus P8B-M | User Guide - Page 146
    Appendix summary A A.1 P8B-M block diagram A-3 ASUS P8B-M
  • Asus P8B-M | User Guide - Page 147
    A.1 P8B-M block diagram ASUS P8B-M A-3
  • Asus P8B-M | User Guide - Page 148
    A-4 Appendix A: Reference information
  • Asus P8B-M | User Guide - Page 149
    , CA 94539, USA Fax +1-510-608-4555 Web site http://usa.asus.com Technical Support Support fax +1-812-284-0883 General support +1-812-282-2787 Online support http://support.asus.com/techserv/techserv.aspx ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880
  • Asus P8B-M | User Guide - Page 150
    112, TAIWAN R.O.C. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : Motherboard Model name : P8B-M conform with the essential requirements of the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Motherboard
P8B-M