Asus P9D-E 4L User Guide

Asus P9D-E 4L Manual

Get Asus P9D-E 4L PDF manuals and user guides View all Asus P9D-E 4L manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P9D-E 4L manual content summary:

  • Asus P9D-E 4L | User Guide - Page 1
    P9D-E/4L Motherboard
  • Asus P9D-E 4L | User Guide - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus P9D-E 4L | User Guide - Page 3
    this guide is organized x Where to find more information x P9D-E/4L Specifications Summary xii Chapter 1: Product Introduction 1.1 Welcome!...1-3 1.2 Package contents 1-3 1.3 Serial number label 1-4 1.4 Special features 1-4 1.4.1 Product highlights 1-4 1.4.2 Innovative ASUS features
  • Asus P9D-E 4L | User Guide - Page 4
    dual function power switch 3-4 Chapter 4: BIOS setup 4-1 4.1 Managing and updating your BIOS 4-3 4.1.1 ASUS CrashFree BIOS 3 utility 4-3 4.1.2 ASUS EzFlash Utility 4-4 4.1.3 BUPDATER utility 4-5 4.2 BIOS setup program 4-7 4.2.1 BIOS menu screen 4-8 4.2.2 Menu bar 4-8 4.2.3 Menu
  • Asus P9D-E 4L | User Guide - Page 5
    4-23 4.4.11 Intel Server Platform Services 4-24 4.4.12 Onboard LAN Configuration 4-25 4.4.13 MIO Card Configuration 4-25 4.4.14 Serial Port Console Redirection 4-26 4.4.15 Runtime Error Logging Support 4-29 4.4.16 APM 4-29 4.4.17 Network Stack 4-30 4.4.18 Intel RC Drivers Version Detail 4-30
  • Asus P9D-E 4L | User Guide - Page 6
    Running the Support DVD 6-7 6.4 Installing the LAN driver 6-15 6.5 Installing the VGA driver 6-20 6.6 Installing the Intel® C22x MEI NULL HECI driver 6-23 6.7 Installing the Intel® I210 Gigabit Adapter driver 6-25 Appendix A: Reference Information A.1 P9D-E/4L block diagram A-3 ASUS contact
  • Asus P9D-E 4L | User Guide - Page 7
    that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications ASUS REACH website at http://csr.asus.com/english/REACH.htm. vii
  • Asus P9D-E 4L | User Guide - Page 8
    service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals encounter technical problems with the product, contact a qualified service technician or your retailer. DO NOT throw the motherboard in municipal waste
  • Asus P9D-E 4L | User Guide - Page 9
    Australian Consumer Law. For the latest product warranty details please visit http:// support.asus.com. Our goods come with guarantees that cannot be excluded under the failure. If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://support.asus.com ix
  • Asus P9D-E 4L | User Guide - Page 10
    utilities. • Chapter 6: Driver installation This chapter provides instructions for installing the necessary drivers for different system components. • Appendix: Reference information This appendix includes additional information that you may refer to when configuring the motherboard. Where to find
  • Asus P9D-E 4L | User Guide - Page 11
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus P9D-E 4L | User Guide - Page 12
    P9D-E/4L Specifications Summary Processor Support / System Bus Core Logic Form Factor Fan Speed Control Rack Ready ASUS Features (Rack and Pedestal dual use) ASWM Enterprise Memory Total Slots Capacity Memory Type Total PCI/PCI-E Slots Slot Location 1 Slot Location 2 Expansion Slots (
  • Asus P9D-E 4L | User Guide - Page 13
    VGA Port RJ-45 PS/2 KB/Mouse Software Out of Band Remote Management CPU Temperature FAN RPM 4 x Intel® I210AT 1 x Management LAN Aspeed AST2300 + 32MB VRAM 1 24-pin ATX power connector 8-pin ATX 12V power connector 4-pin power connector On-board header for optional management card 1 x USB 3.0 pin
  • Asus P9D-E 4L | User Guide - Page 14
    xiv
  • Asus P9D-E 4L | User Guide - Page 15
    Chapter 1: Product Introduction
  • Asus P9D-E 4L | User Guide - Page 16
    Chapter summary 1 This chapter describes the motherboard features and the new technologies it supports. This chapter contains the following sections: 1.1 Welcome!...1-3 1.2 Package contents 1-3 1.3 Serial number label 1-4 1.4 Special features 1-4 ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 17
    ASUS® P9D-E/4L motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard port cable Support CD ASWM Enterprise SDVD Motherboard User Guide Metal Plate for
  • Asus P9D-E 4L | User Guide - Page 18
    solution to your problems. P9D-E/4L xxS2xxxxxxxx Made in China 合格 1.4 Special features 1.4.1 Product highlights Latest processor technology This motherboard supports the latest Intel® Xeon® Processor E3-1200 v3/ CoreTM i3 series in LGA1150 package, which has memory and PCI Express controller
  • Asus P9D-E 4L | User Guide - Page 19
    power requirement. Serial ATA II technology The motherboard supports the Serial ATA II 3 Gb/s technology through the Serial ATA interface and Intel® C224 chipset. The Serial ATA II specification provides levels to ensure stable supply of current for critical components. ASUS P9D-E/4L 1-5
  • Asus P9D-E 4L | User Guide - Page 20
    cost for end users. Moreover, the special patent design offers multiple I/O solutions without occupying the Slot 6 in a 1U system. ASUS MIO Audio card The ASUS MIO audio card is a discrete 8-channel high definition audio (High Definition Audio previously codenamed Azalia) CODEC that enables the
  • Asus P9D-E 4L | User Guide - Page 21
    Chapter 2: Hardware Information
  • Asus P9D-E 4L | User Guide - Page 22
    on the motherboard. This chapter contains the following sections: 2.1 Before you proceed 2-3 2.2 Motherboard overview 2-4 2.3 Central Processing Unit (CPU 2-8 2.4 System memory 2-14 2.5 Expansion slots 2-16 2.6 Onboard LEDs 2-23 2.7 Jumpers...2-26 2.8 Connectors 2-29 ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 23
    2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching so may cause severe damage to the motherboard, peripherals, and/or components. ASUS P9D-E/4L 2-3
  • Asus P9D-E 4L | User Guide - Page 24
    of your chassis to ensure that the motherboard fits into it. To optimize the motherboard features, we highly recommend that you install it in an ATX 1.1 compliant chassis. Ensure to unplug the chassis power cord before installing or removing the motherboard. Failure to do so can cause you
  • Asus P9D-E 4L | User Guide - Page 25
    2.2.3 Motherboard layout ASUS P9D-E/4L 2-5
  • Asus P9D-E 4L | User Guide - Page 26
    2.2.4 Layout contents Slots/Sockets 1. CPU sockets 2. DDR3 sockets 3. PCI Express x16 / PCI Express x8 / PCI Express x1 / PCI slot 4. PIKE slot Page 2-8 2-14 2-17 2-18 Onboard LEDs 1. Standby Power LED (SB_PWR1) 2. Baseboard Management Controller LED (BMC_LED1) 3. CPU Warning LED (
  • Asus P9D-E 4L | User Guide - Page 27
    (16-pin VGA_HDR1) 16. ATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1) 17. System panel connector (20-1 pin PANEL1) 18. Auxiliary panel connector (20-2 pin AUX_PANEL1) Page 2-29 2-30 2-30 2-31 2-31 2-32 2-32 2-33 2-33 2-34 2-34 2-35 2-35 2-36 2-36 2-37 2-38 2-39 2-40 ASUS P9D-E/4L 2-7
  • Asus P9D-E 4L | User Guide - Page 28
    v3 and Intel® Core™ i3 processor. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will
  • Asus P9D-E 4L | User Guide - Page 29
    CPU into the socket to prevent bending the pins on the socket and damaging the CPU. Gold triangle mark Alignment key CPU notches Alignment key ASUS P9D-E/4L 2-9
  • Asus P9D-E 4L | User Guide - Page 30
    5. Close the load plate (A), ensuring that the front edge of the load plate slides under the retention lock (B) then push down the load lever (C). Load lever Retention lock 6. Insert the load lever under the retention tab to remove the PnP cap from the CPU socket. Load lever Retention tab 7. Apply
  • Asus P9D-E 4L | User Guide - Page 31
    you use only Intel® certified multi‑ motherboard. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. A B A A B B A Orient the heatsink and fan assembly such that the CPU fan cable is closest to the CPU fan connector. ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 32
    the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. B 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the
  • Asus P9D-E 4L | User Guide - Page 33
    the CPU heatsink in rack The Intel® 1150 processor requires a specially designed heatsink metal plate and affix the plate to the back of the motherboard, matching the standoffs to the heatsink screw holes. 2. Use a Do not overtighten the screws. Doing so can damage the CPU. ASUS P9D-E/4L 2-13
  • Asus P9D-E 4L | User Guide - Page 34
    2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. A 8 GB Unbuffered with ECC DDR3 DIMMs into the DIMM sockets using the memory configurations in this section. DIMM Slot Per DIMM Populated Channel per Channel UDIMM
  • Asus P9D-E 4L | User Guide - Page 35
    to the user guide bundled in the motherboard package. • Refer to the user guide for qualified vendor lists of the memory modules. Removing a Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 36
    Remove the system unit cover (if your motherboard is already installed in a chassis). 3. BIOS setup. 2. Assign an IRQ to the card. Refer to the tables on the next page. 3. Install the software drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support
  • Asus P9D-E 4L | User Guide - Page 37
    high performance add-on cards. 2.5.6 PCI Express x1 slot (x1 link) The onboard PCIE 3 and PCIE 7 provide one x1 Gen2 link to the Intel® C224 PCH. 2.5.7 PCI slot The PCI 1 and PCI 2 slots supports cards such as LAN, USB, and other cards that complies with PCI specifications. ASUS P9D-E/4L 2-17
  • Asus P9D-E 4L | User Guide - Page 38
    link) 6 (slot 6) PCIE6 PCI-E x16 (x16 Gen3 link) (Auto switch to x8 if slot 5 is occupied) 7 (slot 7) PCIE7 PCI-E x1 (x1 Gen2 link); MIO-892 Supported 2.5.8 PIKE slot The PIKE slots allows you to choose and change your preferred SAS solution easily. Install an optional
  • Asus P9D-E 4L | User Guide - Page 39
    PIKE RAID card slot. • The motherboard illustration is for reference only. The motherboard layout and appearance may vary depending on the model, but the installation steps remain the same. • Refer to section 2.8.2 Internal Connectors for the PIKE SAS/SATA connector location. ASUS P9D-E/4L 2-19
  • Asus P9D-E 4L | User Guide - Page 40
    to install an optional ASMB7 Management Card on your motherboard. 1. Locate the Baseboard Management Card header on the motherboard. 2. Orient and press the Management Card in place. The motherboard illustration is for reference only. The motherboard layout and appearance may vary depending on the
  • Asus P9D-E 4L | User Guide - Page 41
    . 3. Place the other end of the Thermal Sensor cable to the device you would like to monitor temperature. The motherboard illustration is for reference only. The motherboard layout and appearance may vary depending on the model, but the installation steps remain the same. ASUS P9D-E/4L 2-21
  • Asus P9D-E 4L | User Guide - Page 42
    2.5.12 Installing the Audio card 1. Locate the MIO card slot on the motherboard and align the golden fingers of the audio card with the MIO card slot. 2. Insert the audio card into the MIO slot on the motherboard. Ensure that it is 3 completely seated on the card slot. 3. Secure the audio card
  • Asus P9D-E 4L | User Guide - Page 43
    in any motherboard component. The ASUS ASMB7 management device and indicates its initiation status. When the PSU is plugged and the system is OFF, ASUS ASMB7 management device starts system initiation for about one (1) minute. The BMC LED blinks after system initiation finishes. ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 44
    The heartbeat LED functions only when you install the ASUS ASMB7 Management card. • Everytime after the AC power a CPU error or failure has occurred. The warning LED functions only when you install the ASUS ASMB7 Management card. 4. Power LED (+5V_LED1) This LED lights up when the Power-on button
  • Asus P9D-E 4L | User Guide - Page 45
    5. Location LED (LOCLED1) The Location LED is an onboard LED that ligths up when the Location Button on the front panel is pressed. This LED helps you visually locate the server among other servers especially when you are located at the back of the server rack. ASUS P9D-E/4L 2-25
  • Asus P9D-E 4L | User Guide - Page 46
    clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data computer. 4. Hold down the key during the boot process and enter BIOS setup to re- enter data. Except when clearing the RTC RAM, never remove
  • Asus P9D-E 4L | User Guide - Page 47
    to pins 1-2 to activate the VGA feature. 3. LAN controller setting (3-pin LAN_SW1, LAN_SW2, LAN_SW3, LAN_SW4) These jumpers allow you to enable or disable the onboard Intel® I210AT Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature. ASUS P9D-E/4L 2-27
  • Asus P9D-E 4L | User Guide - Page 48
    over pins 1-2 if you want to use the third party software RAID Utility; otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage Technology enterprise SATA Option ROM Utility. 5. Platform Enviromental Control Interface Setting (3-pin PECI1) When an ASMB7-iKVM is installed, set
  • Asus P9D-E 4L | User Guide - Page 49
    No link OFF 10 Mbps connection GREEN Linked ORANGE 100 Mbps connection BLINKING Data activity GREEN 1 Gbps connection ACT/LINK SPEED LED LED LAN port ASUS P9D-E/4L 2-29
  • Asus P9D-E 4L | User Guide - Page 50
    Internal connectors 1. Serial ATA 6.0/3.0 Gbps connectors (7-pin 6Gbps SATA1, SATA2, SATA3, SATA4 [Light Blue]) (7-pin 3Gbps SATA5, SATA6 [Black]) Supported by the Intel® C224 chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 6Gbps of
  • Asus P9D-E 4L | User Guide - Page 51
    PSAS8 [Light Blue]) This motherboard comes with eight (8) PIKE Serial Attached SCSI (PSAS) connectors that supports both Serial Attached SCSI (SAS) and Serial ATA (SATA). Each connector supports one device. • These connectors add-on card causes the front panel LED to light up. ASUS P9D-E/4L 2-31
  • Asus P9D-E 4L | User Guide - Page 52
    connectors are for USB 2.0 ports. Connect the USB module cables to these connectors. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. 5. USB 3.0 connector (20-1 pin USB3_34) These connectors allow you to connect a USB 3.0 module for additional
  • Asus P9D-E 4L | User Guide - Page 53
    ) The fan connectors support cooling fans. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black motherboard components. • These are not jumpers! DO NOT place jumper caps on the fan connectors! • All connectors feature the ASUS Smart Fan technology. ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 54
    8. Serial General Purpose Input/Output connector (6-1 pin SGPIO1) The SGPIO 1 connectors are used for the Intel Rapid Storage Technology Enterprise SGPIO interface that controls the LED pattern generation, device information, and general purpose data. The PSGPIO 1 and PSGPIO 2 connectors only
  • Asus P9D-E 4L | User Guide - Page 55
    PSU information. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. This connector functions only when you install the ASUS ASMB7. ASUS P9D-E/4L 2-35
  • Asus P9D-E 4L | User Guide - Page 56
    11. Trusted Platform Module connector (20-1 pin TPM1) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities,
  • Asus P9D-E 4L | User Guide - Page 57
    parallel port. Connect the parallel port module cable to this connector, then install the module to a slot opening at the back of the system chassis. ASUS P9D-E/4L 2-37
  • Asus P9D-E 4L | User Guide - Page 58
    15. VGA connector (16-1 pin VGA_HDR1) This connector supports the VGA High Dynamic-Range interface. 2-38 Chapter 2: Hardware information
  • Asus P9D-E 4L | User Guide - Page 59
    EATXPWR1, 8-pin EATX12V1) These connectors are for the ATX power supply plugs. The power supply plugs are designed power is inadequate. • This motherboard supports ATX2.0 PSU or later version. • Ensure that your PSU can provide at least the minimum power required by your system. ASUS P9D-E/4L 2-39
  • Asus P9D-E 4L | User Guide - Page 60
    System panel connector (20-1 pin PANEL1) This connector supports several chassis-mounted functions. 1. System power LED turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns
  • Asus P9D-E 4L | User Guide - Page 61
    . 5. Locator Button/Switch (2-pin AUX_BMCLOCBNT) These LEDs are for the locator button on the front panel. This button queries the state of the system locator. ASUS P9D-E/4L 2-41
  • Asus P9D-E 4L | User Guide - Page 62
    Chapter 3: Powering Up
  • Asus P9D-E 4L | User Guide - Page 63
    Chapter summary 3 This chapter describes the power up sequence, and ways of shutting down the system.This chapter contains the following sections: 3.1 Starting up for the first time 3-3 3.2 Powering off the computer 3-4 ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 64
    systems with ATX power supplies, the system LED lights up when you press the ATX power button. test. Check the jumper settings and connections or call your retailer for assistance. 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 4. ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 65
    ON, press the power switch for less than four seconds to put the system to sleep mode or to soft-off mode, depending on the BIOS setting. Pressing the power switch for more than four seconds lets the system enter the soft-off mode regardless of the
  • Asus P9D-E 4L | User Guide - Page 66
    Chapter 4: BIOS setup
  • Asus P9D-E 4L | User Guide - Page 67
    chapter contains the following sections: 4.1 Managing and updating your BIOS 4-3 4.2 BIOS setup program 4-7 4.3 Main menu 4-10 4.4 Advanced menu 4-11 4.5 Event Logs menu 4-31 4.6 Boot menu 4-32 4.7 Monitor menu 4-35 4.8 Security...4-36 4.9 Tool menu 4-39 4.10 Exit menu 4-39 ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 68
    the BIOS recovery finished. DO NOT shut down or reset the system while recovering the BIOS! Doing so would cause system boot failure! The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website at www.asus.com to download the latest BIOS file. ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 69
    the USB flash disk that contains the latest BIOS file to the USB port. 2. Enter the BIOS setup program. Go to the Tool menu to select ASUS EzFlash Utility and press to enable it. ASUS Tek. EzFlash Utility Current Platform Platform : P9D-E/4L Version : 0060 Build Date :12/03/2013 New
  • Asus P9D-E 4L | User Guide - Page 70
    the BUPDATER utility: 1. Visit the ASUS website at www.asus.com and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Download the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com to the bootable USB flash
  • Asus P9D-E 4L | User Guide - Page 71
    DOS V1.06 (09/08/04) FLASH TYPE: MXIC 25L1605A Current ROM Update ROM BOARD: P9D-E/4L VER: 0201 DATE: 12/01/2013 BOARD: P9D-E/4L VER: 0202 DATE: 12/09/2013 PATH: WARNING! Do not turn off power during flash BIOS Note Writing BIOS: DO NOT shut down or reset the system while updating the
  • Asus P9D-E 4L | User Guide - Page 72
    and select Yes to load the BIOS default settings. • The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. ASUS P9D-E/4L 4-7
  • Asus P9D-E 4L | User Guide - Page 73
    help Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Main Advanced Event Logs Boot Monitor Security Tool Exit BIOS Information BIOS Vendor BIOS Version Compliancy BIOS Version Build Date American Megatrends 4.6.5.4 UEFI 2.3.1; PI 1.2 0077 x64 01/31/2013 Set the Date, Use Tab
  • Asus P9D-E 4L | User Guide - Page 74
    Settings. 4.2.5 Navigation keys At the bottom right corner of a menu screen are the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and change the settings. 4.2.6 General > / keys to display the other items on the screen. ASUS P9D-E/4L 4-9
  • Asus P9D-E 4L | User Guide - Page 75
    time. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Main Advanced Event Logs Boot Monitor Security Tool Exit BIOS InformationBIOS Vendor BIOS Version Compliancy BIOS Version Build Date American Megatrends 4.6.5.4 UEFI 2.3.1; PI 1.2 0077 x64 01/31/2013 Set the Date, Use Tab
  • Asus P9D-E 4L | User Guide - Page 76
    SSetravcekr Platform Services InOtnebloaRrCd DLrAiNveCrosnfiVgeurrsaitoinonDetails MIO Card Configuration PPCCII,,PCPIC-IX-XanadnPdCIPCEIxpress SEextptrinegsss. Settings. Serial Port Console Redirection Runtime Error Logging APM Network Stack Intel RC Drivers Version Detail ASUS P9D-E/4L 4-11
  • Asus P9D-E 4L | User Guide - Page 77
    CPU Speed 2500 MHz Processor Cores 4 Intel HT Technology Supported Intel VT-x Technology Supported Intel SMX Technology Supported 64-bit Supported EIST Technology Supported CPU C3 State Supported CPU C6 State Supported CPU C7 State Supported Enabled for WIndows XP and Linux (OS
  • Asus P9D-E 4L | User Guide - Page 78
    instructions BIOS Intel® Turbo Mode Technology. Configuration options: [Enabled] [Disabled] Energy Performance [Performance] Allows you to optimize between performance and power savings. Configuration options: [Performance] [Balanced Performance] [Balanced Energy] [Energy Efficient] ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 79
    ] Allows you enable or disable LakeTiny for C state configuration. Configuration options: [Disabled] [Enabled] Intel TXT (LT) Suppot [Disabled] Allows you to enable or disable the Intel TXT (LT) support. Configuration options: [Disabled] [Enabled] ACPI T State [Disabled] Allows you to enable or
  • Asus P9D-E 4L | User Guide - Page 80
    - Copyright (C) 2013 American Megatrends, Inc. Advanced Intel PCH RC Version Intel PCH SKU Name Intel PCH Rev ID 1.0.0.0 C224 04/C1 USB Configuration settings. USB Configuration PCH Azalia disabling of each of the USB ports (0-13). Configuration options: [Disabled] [Enabled] ASUS P9D-E/4L 4-15
  • Asus P9D-E 4L | User Guide - Page 81
    SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA SUPPORTED [Enabled] [Enabled] [Hard Disk Drive] [Disabled] HardDisk (250.0GB) SUPPORTED [Enabled] [Enabled] [Hard Disk Driver] [Disabled] HardDisk (250.0GB) SUPPORTED [Enabled] [Enabled] [Hard Disk Driver
  • Asus P9D-E 4L | User Guide - Page 82
    ] This allows you enable or disable the support for the BDAT ACPI table. Configuration options: [Enabled] [Disabled] VGA Priority [Offboard] This allows you to prioritize between the onboard and offboard video device to be found. Configuration options: [Onboard] [Offboard] ASUS P9D-E/4L 4-17
  • Asus P9D-E 4L | User Guide - Page 83
    ] [Disabled] Memory Remap [Enabled] This allows you to enable or disable the Memory Remap above 4G. Configuration options: [Enabled] [Disabled] GDXC Support [Disabled] This allows you to enable or disable the GDXC feature. Configuration options: [Enabled] [Disabled] 4-18 Chapter 4: BIOS setup
  • Asus P9D-E 4L | User Guide - Page 84
    Advanced PCI Bus Driver Version PCI 64bit support to Active State Power Management (ASPM). ASPM is a power management protocol that is used to extend battey life. Configuration options: [Disabled] Disables ASMP [Auto] BIOS auto configure [Force L0s] Force all links to L0s State ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 85
    slots. Configuration Options: [Disabled][Enabled] PIKE Option Rom [Enabled] Allows you to enable or disable the PIKE Option Rom. Configuration Options: [Disabled][Enabled] 4-20 Chapter 4: BIOS setup
  • Asus P9D-E 4L | User Guide - Page 86
    support. Configuration options: [Disabled] [Enabled] Port 60/64 Emulation [Enabled] This allows you to enable the I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support for non-USB aware OSes. Configuration options: [Disabled] [Enabled] ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 87
    Controller. Configuration options: [Auto] [Manual] 4.4.7 TPM Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced Configuration TPM Support Current Status Information NO Security Device Found [Disable] Enables or Disables BIOS support for security device.O.S. will not
  • Asus P9D-E 4L | User Guide - Page 88
    you to enable or disable the Windows® Hardware Error Architecture (WHEA) support. Configuration options: [Disabled] [Enabled] 4.4.10 NCT6779D Super IO Configuration =3, 4, 5, 6, 7, 10, 11, 12] [IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12] [IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12] ASUS P9D-E/4L 4-23
  • Asus P9D-E 4L | User Guide - Page 89
    configured in the system. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced Intel Sever Platform Services Configuration ME BIOS Interface Ver : 1.0 SPS Version 3.0.4.162 ME FW Status Value : 0xf0345 ME FW State : SPS ME FW Active ME FW Operation State : M0
  • Asus P9D-E 4L | User Guide - Page 90
    Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced Onboard LAN Configuration INTEL I210 LAN1 MAC: INTEL I210 LAN2 MAC: INTEL I210 LAN3 MAC: INTEL I210 LAN4 MAC: 00:E0:18:10:18:E8 00:E0:18:10 the front Panel type of the MIO. Configuration options: [AC97] [HD] ASUS P9D-E/4L 4-25
  • Asus P9D-E 4L | User Guide - Page 91
    -of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection [Disabled] Console the terminal type. [VT100] ASCII char set. [VT100+] Extends VT100 to support color, function keys, among others [VT-UTF8] Uses UTF8 encoding to map : [1] [2] 4-26 Chapter 4: BIOS setup
  • Asus P9D-E 4L | User Guide - Page 92
    allows you to set the number of rows and columns supported on the Legacy OS. Configuration options: [80x24] [80x25 BIOS POST [Bootloader] This setting allows you to specify if Bootloader is selected than Legacy console redirection. Configuration options: [Always Enable] [Bootloader] ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 93
    -of-Band Management/Windows Emergency Management Services (EMS) Settings The following items management. Configuration options: [VT100] ASCII char set. [VT100+] Extends VT100 to support color, function keys, et. [VT-UTF8] Uses UTF8 encoding to map Unicode Xoff] 4-28 Chapter 4: BIOS setup
  • Asus P9D-E 4L | User Guide - Page 94
    Support [Disabled] Enable/Disable Runtime Error Logging Support. Runtime Error Logging Support [Disabled] Allows you to enable or disable the Runtime Error Logging Support or disable the Wake-on-LAN feature of the Intel® LAN. Configuration options: [Disabled] [Enabled] Power ASUS P9D-E/4L 4-29
  • Asus P9D-E 4L | User Guide - Page 95
    Drivers Version Detail This item displays the Version String for the Intel RC Drivers. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced Intel CPU RC Version Memory RC Version Intel SA RC Version Intel PCH RC Version 1.0.0.0 1.0.0.0 1.0.0.0 1.0.0.0 4-30 Chapter 4: BIOS
  • Asus P9D-E 4L | User Guide - Page 96
    set to [Enabled]. This item allows you to select the options for reaction when the event logs are full. Configuration options: [Do Nothing] [Erase Immediately] ASUS P9D-E/4L 4-31
  • Asus P9D-E 4L | User Guide - Page 97
    [Enabled]. Set the Full Screen Logo to [Enabled] to use the ASUS MyLogo2™ feature. GateA20 Active [Upon Request] This item is useful when any RT code is execute above 1MB. When set to [Upon Request], the GA20 can be disabled using BIOS services. When set to [Always], disabling of GA20 is not allowed
  • Asus P9D-E 4L | User Guide - Page 98
    the BIOS ASUS Logo appears. • To access Windows® OS in Safe Mode, do any of the following: - Press when ASUS Logo appears. - Press after POST. Network Device BBS Priorities / Hard Drive BBS Priorities This allows you to set the order of the legacy devices in this group. ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 99
    priority [Legacy OpROM] This option allows you to control the execution of UEFI and Legacy Storage OpROM. Configuration options: [UEFI OpROM] [Legacy OpROM] 4-34 Chapter 4: BIOS setup
  • Asus P9D-E 4L | User Guide - Page 100
    (RPM). If the fan is not connected to the motherboard, the field shows N/A. VCORE1 Voltage: +12V, + ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Low Speed Mode] [Generic Mode] [High Speed Mode] [Full Speed Mode] ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 101
    the administrator password, follow the same steps as in changing an administrator password, but press when prompted to create/confirm the password. 4-36 Chapter 4: BIOS setup
  • Asus P9D-E 4L | User Guide - Page 102
    ] This item allows you to select the mode of the Secure boot to change Execution policy and Secure Boot Key management. Configuration options: [Standard] [Custom] ASUS P9D-E/4L 4-37
  • Asus P9D-E 4L | User Guide - Page 103
    No. Platform Key (PK)/Key Exchange Key Database (KEK)/Authorized Signature Database (DB)/ Forbidden Signature Database (DBX) Configuration options: [Set New] [Delete] [Append] 4-38 Chapter 4: BIOS setup
  • Asus P9D-E 4L | User Guide - Page 104
    to run the utility to select and update BIOS. Start EzFlash utility Allows you to run the Start EzFlash utility. For more information, see section 4.1.2 ASUS EzFlash utility. 4.10 Exit menu The Exit , a confirmation window appears. Select Yes to save changes and exit. ASUS P9D-E/4L 4-39
  • Asus P9D-E 4L | User Guide - Page 105
    Shell application (shellx64.efi) from one of the available filesystem devices. Select Yes to proceed, or No to cancel, and then press . 4-40 Chapter 4: BIOS setup
  • Asus P9D-E 4L | User Guide - Page 106
    Chapter 5: RAID Configuration
  • Asus P9D-E 4L | User Guide - Page 107
    up, creating, and configuring RAID sets using the available utilities. This chapter contains the following sections: 5.1 Setting up RAID 5-3 5.2 Intel® Rapid Storage Technology enterprise SATA Option ROM Utility 5-5 5.3 Intel® Rapid Storage Technology enterprise (Windows 5-13 ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 108
    disk drives for this setup. If you want to boot the system from a hard disk drive included in a created RAID set, copy first the RAID driver from the support DVD to a floppy disk before you install an operating system to the selected hard disk drive. ASUS P9D-E/4L 5-3
  • Asus P9D-E 4L | User Guide - Page 109
    instructions in the system user guide. 2. Connect a SATA signal cable to the signal connector at the back of each drive and to the SATA connector on the motherboard disk drives attached to the SATA connectors supported by Intel® C224 chipset. To do this: 1. Enter the BIOS Setup during POST. 2. Go to
  • Asus P9D-E 4L | User Guide - Page 110
    ]-Select Menu The navigation keys at the bottom of the screen allow you to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. ASUS P9D-E/4L 5-5
  • Asus P9D-E 4L | User Guide - Page 111
    RAID Volume and press . 2. Key in a name for the RAID set and press . Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023 Copyright(C) 2003-12 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name: Volume0 RAID Level: RAID0(Strips) Disks: Select
  • Asus P9D-E 4L | User Guide - Page 112
    go back to the CREATE VOLUME menu. WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): ASUS P9D-E/4L 5-7
  • Asus P9D-E 4L | User Guide - Page 113
    up/down arrow keys to select the RAID set you want to delete then press . Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023 Copyright(C) 2003-12 Intel Corporation. All Rights Reserved. [ DELETE VOLUME MENU ] Name Volume0 Level Drives RAID0(Stripe) 2 Capacity 298
  • Asus P9D-E 4L | User Guide - Page 114
    . [ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete 3. Press in the confirmation window to reset the drive(s) or press to return to the utility main menu. ASUS P9D-E/4L 5-9
  • Asus P9D-E 4L | User Guide - Page 115
    with other installed non-RAID disks. To rebuild the RAID with other non-RAID disk: 1. During POST, press + at the prompt to enter the Intel Rapid Storage Technology option ROM utility. 2. If there is a non-RAID SATA Hard Disk available, the utility will prompt you to rebuild the RAID. Press
  • Asus P9D-E 4L | User Guide - Page 116
    Manager utility. 6. From the View menu, select Advanced Mode to display the details of the Intel Rapid Storage Console. 7. From the Volumes view option, select RAID volume to view the rebuilding status follow the steps in section Rebuilding the RAID with other non-RAID disk. ASUS P9D-E/4L 5-11
  • Asus P9D-E 4L | User Guide - Page 117
    Utility You can set the boot priority sequence in the BIOS for your RAID arrays when creating multiRAID using the Intel® Rapid Storage Technology enterprise SATA Option ROM utililty. To set the boot array in the BIOS: Set at least one of the arrays bootable to boot from the hard disk. 1. Reboot
  • Asus P9D-E 4L | User Guide - Page 118
    supported by the Southbridge. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 6. To enter the Intel can click Rescan to re-scan any attached hard disks. ASUS P9D-E/4L 5-13
  • Asus P9D-E 4L | User Guide - Page 119
    5.3.1 Creating a RAID set To create a RAID set: 1. From the utility main menu, select Create Volume then select volume type and click Next. 2. Key in a name for the RAID set, then select the array disks. 3. Select the Volume Size tab then drag the bar to set the volume size. 5. Click Next. • If
  • Asus P9D-E 4L | User Guide - Page 120
    before adding any data. The created RAID set is displayed in the Volumes list. If you wish to change the settings, go to Volume Properties. ASUS P9D-E/4L 5-15
  • Asus P9D-E 4L | User Guide - Page 121
    5.3.2 Changing a Volume Type To change the volume type in Volume Properties: 1. Click the SATA array items you want to change in Volumes field. 2 From the Volume Properties field, select Type:RAID 1 Change type. 3. You can also change the Name, Select the new volume type, and Select additional disks
  • Asus P9D-E 4L | User Guide - Page 122
    , select Delete volume. 3. Click Yes to delete the volume and return to the utility main menu, or click No to return to the main menu. ASUS P9D-E/4L 5-17
  • Asus P9D-E 4L | User Guide - Page 123
    5.3.4 Preferences System Preferences Allow you to set to show the notification area icon and show system information, warning, or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system
  • Asus P9D-E 4L | User Guide - Page 124
    Chapter 6: Driver installation
  • Asus P9D-E 4L | User Guide - Page 125
    6.2 Management applications and utilities installation 6-8 6.3 Running the Support DVD 6-8 6.4 Installing the LAN driver 6-16 6.5 Installing the VGA driver 6-21 6.6 Installing the Intel® C22x MEI NULL HECI driver 6-24 6.7 Installing the Intel® I210 Gigabit Adapter driver 6-26 ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 126
    FreeDOS command prompt 7. From the C22x Intel RAID Driver sub-menu, use the Up or Down arrow keys to select the driver and press to create the RAID driver disk. C22x INTEL RAID Driver Windows 32 bit(AHCI / AHCI RAID) Windows Server 2012 64 bit (AHCI / AHCI RAID) Back Exit ASUS P9D-E/4L 6-3
  • Asus P9D-E 4L | User Guide - Page 127
    : 1. Start Windows®. 2. Place the motherboard support DVD into the optical drive. 3. Go to the Make disk menu, then select the type of RAID driver disk you want to create. 4. Insert a floppy disk into the USB floppy disk drive. 5. Follow succeeding screen instructions to complete the process. Write
  • Asus P9D-E 4L | User Guide - Page 128
    installing Windows® Server 2008 OS 1. Boot the computer using the Windows® Server 2008 OS installation disc. Follow the screen instructions to start installing Windows Server 2008. 2. When prompted to choose a type of installation, click Custom (advanced). 3. Click Load Driver. ASUS P9D-E/4L 6-5
  • Asus P9D-E 4L | User Guide - Page 129
    RAID controller driver you need from the list and click Next. 7. When the system finishes loading the RAID driver, replace the motherboard Support DVD with the Windows Server installation disc. Select the drive to install Windows and click Next. 8. Follow succeeding screen instructions to continue
  • Asus P9D-E 4L | User Guide - Page 130
    support DVD. The main screen of the Support DVD contains the following tabs: 1. Drivers 2. Utilities 3. MakeDisk 4. Manual 5. Contact The main screen of the Support DVD looks exactly the same on the Windows® Server 2008 R2 and on the Windows® Server 2012 Operating System (OS). ASUS P9D-E/4L 6-7
  • Asus P9D-E 4L | User Guide - Page 131
    The Drivers Menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. 6.3.2 Utilities menu tab The Utilities menu displays the software applications and utilities that the motherboard supports. 6-8 Chapter 6: Driver
  • Asus P9D-E 4L | User Guide - Page 132
    RAID driver disks. Press the arrow down button in the lower part of the menu to view more items. 6.3.4 Manual menu The Manual menu provides the link to the Broadcom NetXtreme II Network Adapter user guide. You need an internet browser installed in your OS to view the User Guide. ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 133
    more information or technical support for your motherboard. 6.3.6 Installing the Intel® Chipset device Software driver This section provides the instructions on how to install the Intel® chipset device software on the system. You need to manually install the Intel® chipset device software on
  • Asus P9D-E 4L | User Guide - Page 134
    5. From the Intel® Chipset Device Software, click Next to start the installation. 6. In the License Agreement window, click Yes to continue. 7. Read the Readme File information and click Next to continue. ASUS P9D-E/4L 6-11
  • Asus P9D-E 4L | User Guide - Page 135
    . llation. 9. When finished, click Next. 10. When prompted ttoorreessttaarrttththeeccoommppuuteter,r, select YYeess,,I Iwwanant totorersetasrttatrhtitshcisomputer cnomwptuhteenr ncloicwk tFheinnischlicktoFcinoimshplteote the cinosmtapllaetieonth. e installation. 6-12 Chapter 6: Driver installation
  • Asus P9D-E 4L | User Guide - Page 136
    Device Software from the Drivers menu to start the installation. 5. From the IInntteell®®CChhiippsseettDDeevviciceeSoftware, ScloicfktwNaerxet,. click Next. 6. In the LLiicceennsseeAAggrreeeemmeennttwwininddooww, ,click cYleicsktYoecsontotincuoenttinhueeptrhoecepsrso.cess. ASUS P9D-E/4L 6-13
  • Asus P9D-E 4L | User Guide - Page 137
    7. Read the Readme File information and click Next to continue. 8. When done, click Finish to complete the installation. 6-14 Chapter 6: Driver installation
  • Asus P9D-E 4L | User Guide - Page 138
    to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 4. Click Intel® Network Connections Software on the Drivers menu to start the installation. 5. From the Intel® Network Connections window, click Install Drivers and Software. ASUS P9D-E/4L 6-15
  • Asus P9D-E 4L | User Guide - Page 139
    6. Click Next in the Welcome to the InstallShield Wizard for Intel(R) Network Connections. 7. From the License Agreement window, select I accept the terms in the license agreement then click Next. 8. Select the drivers you want to install in the Setup Options window and click Next. 9. From the Ready
  • Asus P9D-E 4L | User Guide - Page 140
    If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 4. Click Intel® Network Connections Software on the Drivers menu to start the installation. ASUS P9D-E/4L 6-17
  • Asus P9D-E 4L | User Guide - Page 141
    the Intel® Network Connections window, click Install Drivers and Software. 6. Click Next in the Welcome to the InstallShield Wizard for Intel(R) Network Connections window. 7. Select the drivers you want to install in the Setup Options window and click Next. 6-18 Chapter 6: Driver installation
  • Asus P9D-E 4L | User Guide - Page 142
    8. Click Install to continue. 9. When done, click Finish to complete the installation. ASUS P9D-E/4L 6-19
  • Asus P9D-E 4L | User Guide - Page 143
    Installing the VGA driver This section provides the instructions on how to install the ASPEED Video Graphics Adapter (VGA) driver. To install the ASPEED VGA driver on Windows® Server 2008 R2: 1. Restart the computer. 2. Log in with Administrator privileges. 3. Insert the Motherboard Support DVD to
  • Asus P9D-E 4L | User Guide - Page 144
    6. Key in a username and organization then click Next. 7. Select Complete in the Setup Type window then click Next. 8. Click Install to begin the installation. 9. When done, click Finish. ASUS P9D-E/4L 6-21
  • Asus P9D-E 4L | User Guide - Page 145
    on Windows® Server 2012: 1. Restart the computer. 2. Log in with Administrator privileges. 3. Insert the Motherboard Support DVD to the optical drive. The support DVD automatically displays the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in your computer, browse
  • Asus P9D-E 4L | User Guide - Page 146
    ASSETUP.EXE to run the support DVD. 4. Click Intel® C22x MEI NULL HECI on the Drivers menu of the main screen to start the installation. 5. From the Welcome to the Setup Program window, click Next. 6. Click Yes in the License Agreement window to continue with the installation. ASUS P9D-E/4L 6-23
  • Asus P9D-E 4L | User Guide - Page 147
    9. Click NEXT when the installation of driver is complete. 10. Click Finish to complete the installation. 6-24 Chapter 6: Driver installation
  • Asus P9D-E 4L | User Guide - Page 148
    the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 4. Click Intel® I210 Gigabit Adapter Driver in the Drivers menu of the main screen to start the installation. 5. Click Next to continue. 6. From the Program Maintenance window, select Modify then click Next. ASUS P9D-E/4L 6-25
  • Asus P9D-E 4L | User Guide - Page 149
    7. Select the options you want to install then click Next to continue. 8. Click Install in the Ready to Modify the Program window to begin with the loading of the selected options. 9. When done, click Finish. 6-26 Chapter 6: Driver installation
  • Asus P9D-E 4L | User Guide - Page 150
    4. Click Intel® I210 Gigabit Adapter Driver in the Drivers menu of the main screen to start the installation. 5. Click Next to continue. 6. From the Program Maintenance window, select Modify then click Next. 7. Select the options you want to install then click Next to continue. ASUS P9D-E/4L 6-27
  • Asus P9D-E 4L | User Guide - Page 151
    8. In ththeeRReaedaydtyo tMooMdiofydtihfye PthroegPrarmogram window, click Install to load the options you selected. 9. When done, click Finish. 6-28 Chapter 6: Driver installation
  • Asus P9D-E 4L | User Guide - Page 152
    Appendix A: Reference Information
  • Asus P9D-E 4L | User Guide - Page 153
    Chapter summary A This appendix includes additional information that you may refer to when configuring the motherboard. This chapter contains the following sections: A.1 P9D-E/4L block diagram A-3 ASUS P9D-E/4L
  • Asus P9D-E 4L | User Guide - Page 154
    A.1 P9D-E/4L block diagram ASUS P9D-E/4L A-3
  • Asus P9D-E 4L | User Guide - Page 155
    A-4 Appendix A: Reference information
  • Asus P9D-E 4L | User Guide - Page 156
    , Taiwan 11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail [email protected] Web site http://www.asus.com.tw Technical Support Telephone Online Support +886-2-2894-3447 (0800-093-456) http://support.asus.com/techserv/techserv.aspx ASUSTeK COMPUTER INC. (China) Address No.508
  • Asus P9D-E 4L | User Guide - Page 157
    Fax +49-2102-959911 Web site http://www.asus.de Online contact http://www.asus.de/sales Technical Support Telephone +49-1805-010923 Support Fax +49-2102-959911 Online support http://support.asus.com/techserv/techserv.aspx ASUS Czech Service s.r.o. (Europe) Address Na Rovince 887, 720 00
  • Asus P9D-E 4L | User Guide - Page 158
    (Poland) Address Ul. Postępu 6, 02-676 Warszawa, Poland Web site http://pl.asus.com Technical Support Telephone Online Support +48-225718033 http://support.asus.com/techserv/techserv.aspx ASK-Service (Russia and CIS) Address 10 Telephone (495) 640-32-75 Web site http
  • Asus P9D-E 4L | User Guide - Page 159
    ASUSTeK COMPUTER INC. 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Product name : Motherboard Model name : P9D-E/4L, P9D-E/4L(ASMB7-IKVM) conform with the essential requirements of the following directives: 2004/108/EC
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
Motherboard
P9D-E/4L