Asus ROG CROSSHAIR VI HERO WI-FI AC CROSSHAIR VI HERO Wi-Fi AC Users manualEng
Asus ROG CROSSHAIR VI HERO WI-FI AC Manual
View all Asus ROG CROSSHAIR VI HERO WI-FI AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus ROG CROSSHAIR VI HERO WI-FI AC manual content summary:
- Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 1
Motherboard ROG CROSSHAIR VI HERO (WI-FI AC) - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 2
service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL https://www.asus.com/support/ or (2) problems - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 3
Contents Safety information...vi About this guide...vii ROG CROSSHAIR VI HERO (WI-FI AC) specifications summary ix Package contents...xiv 2-10 2.1.9 Wi-Fi antenna installation 2-11 2.1.10 M.2 installation 2-12 2.1.11 3D printing part installation 2-13 2.2 BIOS update utility 2-14 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 4
3-22 3.9.3 ASUS Overclocking Profile 3-23 3.9.4 ROG OC Panel H-Key Configure 3-23 3.9.5 ASUS SPD Information 3-23 3.9.6 Graphics Card Information 3-24 3.10 Exit menu 3-24 3.11 Updating BIOS 3-25 3.11.1 EZ Update 3-25 3.11.2 ASUS EZ Flash 3 3-26 3.11.3 ASUS CrashFree BIOS 3 3-28 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 5
Chapter 4: RAID Support 4.1 RAID configurations 4-1 4.1.1 RAID definitions 4-1 4.1.2 Installing Serial ATA hard disks 4-2 4.2 Creating a RAID driver disk 4-2 4.2.1 Creating a RAID driver disk in Windows 4-2 Appendix Notices ...A-1 ASUS contact information A-7 v - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 6
Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with . • If you encounter technical problems with the product, contact a qualified service technician or your retailer - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 7
of the BIOS parameters are also provided. • Chapter 4: RAID Support This chapter describes the RAID configurations. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS website The ASUS website (www.asus.com) provides - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 8
of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 9
ROG CROSSHAIR VI HERO (WI-FI AC) specifications summary CPU Chipset Memory Expansion slots Storage Audio AM4 socket for AMD® Ryzen™ / 7th Generation A-series / Athlon™ Processors Supports 14nm CPU AMD® X370 AMD Ryzen™ Processors - 4 x D IMM, max. 64GB, DDR4 3200+ (OC) / 2666 / 2400 / 2133 MHz, - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 10
ROG CROSSHAIR VI HERO (WI-FI AC) specifications summary USB ROG Exclusive Features AMD Ryzen™ / 7th Generation A-series / Athlon™ Processors - 4 x USB 3.0 ports (4 ports at back panel[blue]) AMD X370 Clear CMOS Button BIOS Flashback Button LN2 Mode ROG RAMDisk CloneDrive ROG RAMCache II KeyBot II - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 11
ROG CROSSHAIR VI HERO (WI-FI AC) specifications summary Back I/O Ports Special Features Multi-GPU support 1 x Clear CMOS button 1 x BIOS Flashback button 1 x 2x2 Wi-Fi module 2 x USB 3.1 ports ( 1 x Type-C [black] and 1 x Type-A [red]) 8 x USB 3.0 ports [blue] 4 x USB 2.0 ports [black] 1 x Anti- - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 12
ROG CROSSHAIR VI HERO (WI-FI AC) specifications summary Internal I/O Ports LAN Wireless & Bluetooth 1 x USB 3.1 front panel connector 1 x USB 3.0 connector supports additional 2 USB 3.0 ports 1 x USB 2.0 connector supports additional 2 USB 2.0 ports (via ROG_EXT header) 8 x SATA 6Gb/s connectors - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 13
ROG CROSSHAIR VI HERO (WI-FI AC) specifications summary BIOS Manageability Software Operating System Support Form Factor 128 Mb Flash ROM, UEFI AMI BIOS, PnP, WfM2.0, SM BIOS 3.0, ACPI 6.1, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Q-fan Control, F3 My - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 14
DVD Documentation ROG CROSSHAIR VI HERO (WI-FI AC) 2 x 2-in-1 SATA 6 Gb/s cables 1 x SLI HB BRIDGE(2-WAY-M) 1 x Extension Cable for RGB Strips (80cm) 1 x 2x2 Dual-Band Wi-Fi Moving Antennas 1 x I/O Shield 1 x Q-Connector 1 x ROG Coaster 1 x 10-in-1 ROG Cable Label 1 x ROG sticker 1 x M.2 Screw - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 15
Installation tools and components 1 Bag of screws Phillips (cross) screwdriver PC chassis Power supply unit AMD AM4 CPU AMD AM4/AM3 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 16
xvi - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 17
off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. ROG CROSSHAIR VI HERO (WI-FI AC) 1-1 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 18
1.1.2 Motherboard layout Chapter 1 Refer to 1.1.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. 1-2 Chapter 1: Product Introduction - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 19
pin EATXPWR; 8-pin EATX12V_1; 4-pin EATX12V_2) 2. AM4 CPU socket 3. DDR4 DIMM slots 4. AURA RGB panel connector (USB3.1_E1) 10. M.2 Socket 3 for M Key 11. AMD® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-8) 12. Water in, water 1-10 1-10 1-9 1-9 1-23 1-29 ROG CROSSHAIR VI HERO (WI-FI AC) 1-3 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 20
Processing Unit (CPU) The motherboard comes with an AM4 socket designed for AMD® Ryzen™ / 7th Generation A-series / Athlon™ Series CPU up to 8-core. The AM4 socket has a different pinout design. Ensure that you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 21
is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Recommended memory configurations ROG CROSSHAIR VI HERO (WI-FI AC) 1-5 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 22
for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • This motherboard does not support DIMMs made up of 512 Mb (64 MB) chips or less (Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB). • The default - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 23
components. Chapter 1 Slot No. Slot Description 1 PCIe 2.0 x1_1 slot 2 PCIe 3.0 x16/x8_1 slot 3 PCIe 2.0 x1_2 slot 4 PCIe 3.0 x8_2 slot 5 PCIe 2.0 x1_3 slot 6 PCIe 2.0 x4_3 slot ROG CROSSHAIR VI HERO (WI-FI AC) 1-7 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 24
Ryzen™ Processors VGA Configuration Single VGA/PCIe card PCIe operating mode PCIe_x16/x8_1 PCIe_x8_2 x16 N/A Dual VGA/PCIe card x8 x8 AMD 7th Generation A-series / Athlon™ Processors VGA Configuration Single VGA/PCIe card Dual VGA/PCIe card PCIe operating mode PCIe_x16/x8_1 PCIe_x8_2 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 25
the system and unplug the power cable before removing or installing any motherboard component. 2. RESET button (RESET) Press the reset button to reboot the system. ROG CROSSHAIR VI HERO (WI-FI AC) 1-9 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 26
Boot button (SAFE_BOOT) The Safe Boot button can be pressed anytime to force the system to reboot into the BIOS safe mode. This button temporarily applies safe settings to the BIOS while retaining any overclocked settings allowing you to modify the settings causing boot failure. Use this button when - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 27
using extreme overclocking, enabling slow mode will decrease the processor frequency and stabilize the system, allowing overclockers to keep track of their overclocking data. Chapter 1 ROG CROSSHAIR VI HERO (WI-FI AC) 1-11 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 28
the current status of your CPU. A red light indicates that the CPU is not ready to boot, and the LED will turn green once the problem is solved. This userfriendly design helps you quickly identify whether your CPU is ready to boot or not. 1-12 Chapter 1: Product Introduction - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 29
3. Q-Code LED The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the following page for details. Chapter 1 ROG CROSSHAIR VI HERO (WI-FI AC) 1-13 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 30
memory speed Unspecified memory initialization error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed (continued on the next page) 1-14 Chapter 1: Product Introduction - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 31
PCH Runtime Services CPU DXE initialization is started PCI host bridge initialization System Agent DXE initialization is started System Agent DXE SMM initialization is started System Agent DXE initialization (System Agent module specific) (continued on the next page) ROG CROSSHAIR VI HERO (WI-FI AC - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 32
Chapter 1 Q-Code table Code 70 71 72 73 - 77 78 79 7A - 7F 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E - 9F A0 A1 A2 A3 A4 A5 A6 A7 A8 Description PCH DXE initialization is started PCH DXE SMM initialization is started PCH devices initialization PCH DXE Initialization (PCH module specific) ACPI - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 33
Status Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy returned error) Flash update is failed Reset protocol is not available PCI bus hot plug ROG CROSSHAIR VI HERO (WI-FI AC) 1-17 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 34
Chapter 1 ACPI/ASL Checkpoints Code 0x01 0x02 0x03 0x04 0x05 0x10 0x20 0x30 0x40 0xAC 0xAA Description System is entering S1 sleep state System is entering S2 sleep state System is entering S3 sleep state System is entering S4 sleep state System is entering S5 sleep state System is waking up from - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 35
1.1.8 Jumper 1. LN2 Mode jumper (3-pin LN2_MODE) With LN2 mode activated, the ROG motherboard is optimized to remedy the cold-boot bug during POST and help the system boot successfully. Chapter 1 ROG CROSSHAIR VI HERO (WI-FI AC) 1-19 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 36
a RAID 0, 1, and 10 configuration through the onboard AMD® X370 chipset. Chapter 1 • These connectors are set to BIOS to [RAID]. • Before creating a RAID set, refer to section RAID configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 37
with USB 2.0. The USB 3.0 module is purchased separately. The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the operating system's setting. ROG CROSSHAIR VI HERO (WI-FI AC) 1-21 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 38
connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 MBps connection speed. Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! 1 x USB 2.0 port - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 39
that supports HD Audio standard. Connect one end of the front panel audio I/O module cable to this connector. We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. ROG CROSSHAIR VI HERO (WI-FI AC - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 40
Do not place jumper caps on the fan connectors! • Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector. W_PUMP+ function support depends on water cooling device. Header CPU_FAN CPU_OPT CHA_FAN1 CHA_FAN2 CHA_FAN3 AIO_PUMP W_PUMP+ Max. Current 1A 1A 1A 1A 1A 1A 3A Max. Power 12W - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 41
. • If you want to use two or more high-end PCIe x16 cards, use a PSU with 1000W power or above to ensure the system stability. ROG CROSSHAIR VI HERO (WI-FI AC) 1-25 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 42
connectors (10-1 pin F_PANEL; 4-pin SPEAKER) These connectors supports several chassis-mounted functions. Chapter 1 • System power the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power button for more than four seconds while the system is ON - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 43
ROG extension connector (18-1 pin ROG_EXT) This connector is for the OC Panel I/II. • The OC Panel I/II is purchased separately. • Support for OC Panel I/II varies over different platforms. • Visit www.asus 's critical components and connected devices. ROG CROSSHAIR VI HERO (WI-FI AC) 1-27 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 44
11. AURA RGB headers (4-pin RGB_HEADER1-2) These connectors are for RGB LED strips. Chapter 1 The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 2A (12V), and no longer than 2 m. Before you install or remove any component, - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 45
Processors, the M.2(SOCKET3) supports SATA mode M Key design and type 2242 / 2260 / 2280 / 22110 storage devices. The M.2 SSD module is purchased separately. 13. LED connector (5-pin RGB_LED_STRIP) This LED connector is for connecting LED strips on your cover. ROG CROSSHAIR VI HERO (WI-FI AC) 1-29 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 46
1 14. TPM connector (14-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which securely stores to monitor the temperature and flow rate of your liquid cooling system. You can manually adjust the fans and water pump to optimize the thermal efficiency of your liquid cooling - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 47
1.1.10 ProbeIt The ROG ProbeIt allows you to detect your system's current voltage and OC settings. Use a multimeter to measure the ProbeIt . The illustration above is for reference only, the actual motherboard layout and measure points may differ by model. ROG CROSSHAIR VI HERO (WI-FI AC) 1-31 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 48
Chapter 1 1-32 Chapter 1: Product Introduction - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 49
steps are the same for all models. Motherboard installation 1. Install the ASUS Q-Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. Chapter 2 ROG CROSSHAIR VI HERO (WI-FI AC) 2-1 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 50
3. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard. 2-2 Chapter 2: Basic Installation - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 51
AMD AM4 socket is compatible with AMD AM4 processors. Ensure you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! Chapter 2 ROG CROSSHAIR VI HERO (WI-FI AC - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 52
2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. Type 1 Chapter 2 2-4 Chapter 2: Basic Installation - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 53
Type 2 Chapter 2 When using this type of CPU fan, remove the screws and the retention module only. Do not remove the plate on the bottom. ROG CROSSHAIR VI HERO (WI-FI AC) 2-5 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 54
2.1.4 DIMM installation Chapter 2 To remove a DIMM 2-6 Chapter 2: Basic Installation - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 55
2.1.5 ATX power connection Chapter 2 OR AND • DO NOT connect the 4-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or connect both the 8-pin and 4-pin power plugs. ROG CROSSHAIR VI HERO (WI-FI AC) 2-7 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 56
2.1.6 SATA device connection OR OR Chapter 2 2-8 Chapter 2: Basic Installation - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 57
Chapter 2 2.1.7 Front I/O connector To install ASUS Q-Connector To install USB 3.1 connector To install USB 3.0 connector USB 3.1 This connector will USB 3.0 USB 2.0 To install front panel audio connector To install system speaker connector AAFP ROG CROSSHAIR VI HERO (WI-FI AC) 2-9 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 58
2.1.8 Expansion card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2 2-10 Chapter 2: Basic Installation - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 59
the Wi-Fi GO! software. • Ensure that the antenna is at least 20 cm away from all persons. The illustration above is for reference only. The I/O port layout may vary with models, but the Wi-Fi antenna installation procedure is the same for all models. Chapter 2 ROG CROSSHAIR VI HERO (WI-FI AC - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 60
2.1.10 M.2 installation Chapter 2 Supported M.2 type varies per motherboard. 2-12 Chapter 2: Basic Installation - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 61
regarding the installation of the 3D printing part on your motherboard, please refer to the product page of your motherboard on the ASUS website at www.asus.com. You may use the screw package included to secure the 3D printing part to the 3D Mount. Chapter 2 ROG CROSSHAIR VI HERO (WI-FI AC) 2-13 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 62
the section Updating BIOS in Chapter 3. • Connect your USB keyboard on the KeyBot port if you want to use the KeyBot feature. Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system's failure to boot up, please contact your local ASUS Service Center - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 63
BIOS Flashback button 7. Wi-Fi 802.11 a/b/g/n/ac, Bluetooth V4.1 8. USB 3.1 Type-A port EA3 9. USB 3.1 Type-C port EC2 10. Optical S/PDIF OUT port 11. Audio I/O ports** * and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions. ROG CROSSHAIR VI HERO (WI-FI - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 64
• USB 3.0 devices can only be used as data storage only. • We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices. • When KeyBot II is activated, USB hot plug function of the KeyBot port (USB 2.0 port 12) will be temporarily - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 65
2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Chapter 2 Connect to 2 Speakers ROG CROSSHAIR VI HERO (WI-FI AC) 2-17 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 66
Chapter 2 Connect to 4 Speakers Connect to 6 Speakers Connect to 8 Speakers 2-18 Chapter 2: Basic Installation - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 67
tests (POST). While the tests are running, the BIOS beeps (refer to the BIOS the BIOS Setup. Follow the instructions in Chapter BIOS setting. Press the power button for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. ROG CROSSHAIR VI HERO (WI-FI AC - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 68
Chapter 2 2-20 Chapter 2: Basic Installation - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 69
BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. When downloading or updating the BIOS file, rename it as C6H.CAP for this motherboard. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 70
information on how to erase the RTC RAM via the Clear CMOS button. • The BIOS setup program does not support the Bluetooth devices. Please visit ASUS website for the detailed BIOS content manual. BIOS menu screen The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode. You can - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 71
language Creates storage RAID and of the BIOS setup program configures system overclocking Chapter 3 Displays the CPU Fan's speed. Click the button to manually tune the fans Loads optimized default vary depending on the devices you installed to the system. ROG CROSSHAIR VI HERO (WI-FI AC) 3-3 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 72
Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following on the FAQ Displays the CPU temperature, CPU, and memory voltage output 3-4 Chapter 3: BIOS Setup - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 73
BIOS settings and save it to MyFavorites menu. Refer to section 3.3 My Favorites for more information. Q-Fan Control(F6) This button above the menu bar displays the current settings of your fans. Use this button to manually for more information. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-5 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 74
Move your mouse over this button to show a QR code, scan this QR code on your mobile device to connect to the BIOS FAQ web page of the ASUS support website. You can also scan the following QR code: Hot keys This button above the menu bar contains the navigation keys for the - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 75
3.2.3 Q-Fan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans. Click to select a to undo the changes Click to go back to main menu Select to manually configure your fans Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-7 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 76
configure your fans' operating speed. Chapter 3 Speed points To configure your fans: Select to manually configure your fans 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 77
OC setup OC Tuning To start OC Tuning: 1. Press on your keyboard or click EZ Tuning Wizard screen. from the BIOS screen to open 2. Click OC then click Next. 3. Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-9 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 78
then click Yes to start the OC Tuning. 3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 79
your keyboard or click Setup Tree Map screen. from the BIOS screen to open 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen. Main screen. 5. Go to My Favorites menu to view the saved BIOS items. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-11 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 80
. • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.1.6 Onboard buttons following item appears only when you set the Ai Overclocking Tuner to [Manual]. BCLK Frequency This item allows you to set the BCLK frequency to - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 81
show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. PSS Support This item allows you enable or disable the item allows you to view memory information related to Node 0. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-13 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 82
3.6.2 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] 3.6.3 ROG Effects The items in this menu allow you to - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 83
off. Configuration options: [On] [Off] Intel LAN Controller This item allows you to enable or disable the Intel LAN controllers. Configuration options: [Disabled] [Enabled] Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-15 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 84
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Restore On AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an of the connected devices. NVM Express devices do not support SMART information. Chapter 3 3-16 Chapter 3: BIOS Setup - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 85
USB Mass Storage Driver Support. Configuration options: [Disabled] [Enabled] USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.1.2 Motherboard layout for the location of the USB ports. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-17 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 86
display the other BIOS items. Q-fan AC power loss. Boot Configuration Boot Logo Display [Auto] [Full Screen] [Disabled] Sets the boot logo to display during POST. Sets the boot logo display in full screen during POST. Disables the boot logo display during POST. Chapter 3 3-18 Chapter 3: BIOS - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 87
] The Option ROM Messages will be shown during the POST. Only the ASUS logo will be shown during the POST. Interrupt 19 Capture [Enabled] [ Mode of the BIOS after POST. [EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-19 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 88
devices. For better compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. Disable the CSM to fully support the non-UEFI driver add-on devices or the from unauthorized access and malwares during POST. Chapter 3 3-20 Chapter 3: BIOS Setup - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 89
you to run ASUS EZ Flash 3. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.11.2 ASUS EZ Flash 3. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-21 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 90
Secure Erase on the Advanced mode menu. Check the ASUS support site for a full list of SSDs tested with Secure Erase. The drive may become unstable if • Frozen. The frozen state is the result of a BIOS protective measure. The BIOS guards drives that do not have password protection by freezing them - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 91
updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version 3.9.5 ASUS SPD Information This item allows you to view the DRAM SPD information. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC) 3-23 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 92
and recommended configuration for the PCIE slots that the graphics card is installed in your system. This feature is only supported on selected ASUS graphics cards. Bus Interface This item allows you to select the bus interface. Configuration options: [PCIEX16_1] [PCIEX16_2] 3.10 Exit menu - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 93
you to update the motherboard BIOS in Windows® environment. • EZ Update requires an Internet connection either through a network or an ISP (Internet Service Provider). • This utility is available in the support DVD that comes with the motherboard package. Chapter 3 ROG CROSSHAIR VI HERO (WI-FI AC - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 94
varies per region and Internet conditions. Check your local Internet connection before updating through the Internet. To update the BIOS by USB: 1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press . 2. Insert the USB flash disk - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 95
the update. 5. Reboot the system when the update process is done. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details. ROG CROSSHAIR VI HERO (WI-FI AC) 3-27 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 96
or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 97
Chapter 4: RAID Support RAID Support 4.1 RAID configurations The motherboard supports RAID 0, RAID 1, and RAID 10 solution. 4 If you want to install a Windows® operating system drives or use an existing drive and three new drives for this setup. Chapter 4 ROG CROSSHAIR VI HERO (WI-FI AC) 4-1 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 98
you to select the installation media containing the RAID driver. 2. Insert the support USB drive with RAID driver into the USB port, and then click the corresponding OS version. Click OK. 4. Follow the succeeding screen instructions to complete the installation. To set up a Windows® UEFI operating - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 99
interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. ROG CROSSHAIR VI HERO (WI-FI AC) A-1 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 100
Appendix Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This Class B digital apparatus complies with Canadian ICES-003, RSS-210, and CAN ICES3(B)/NMB-3(B). This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 101
the battery should not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. ROG CROSSHAIR VI HERO (WI-FI AC) A-3 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 102
Appendix FCC Bluetooth Wireless Compliance The antenna used with this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant. Bluetooth Industry Canada Statement This Class B device meets all requirements of the - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 103
Direktīvas 2014/53/ES būtiskajām prasībām un citiem citiem saistošajiem nosacījumiem. Pilns ES atbilstības paziņojuma teksts pieejams šeit: https://www.asus.com/support/ Wi-Fi darbība 5150-5350 MHz ir jāierobežo lietošanai telpās valstīs, kuras norādītas tālāk. ROG CROSSHAIR VI HERO (WI-FI AC) A-5 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 104
/ 5150-5350 MHz arasındaki WiFi çalışması, tabloda listelenen ülkeler için iç mekân kullanımıyla kısıtlanacaktır. ASUSTek Computer Inc 2014 / 53 / EU https://www.asus.com/support/ Wi-Fi 5150-5350 AT BE BG CZ DK EE FR DE IS IE IT EL ES CY LV LI LT LU HU MT NL NO PL - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 105
Str. 21-23, 40880 Ratingen, Germany Fax +49-2102-959931 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-2102-5789555 Support Fax +49-2102-959911 Online support http://qr.asus.com/techserv ROG CROSSHAIR VI HERO (WI-FI AC) A-7 - Asus ROG CROSSHAIR VI HERO WI-FI AC | CROSSHAIR VI HERO Wi-Fi AC Users manualEng - Page 106
(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont, CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : CROSSHAIR VI HERO, ROG CROSSHAIR VI HERO (WI-FI AC) Conforms to the following
Motherboard
ROG CROSSHAIR
VI HERO
(WI-FI AC)