Asus RP-AX56 QSG Quick Start Guide in English
Asus RP-AX56 Manual
 |
View all Asus RP-AX56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus RP-AX56 manual content summary:
- Asus RP-AX56 | QSG Quick Start Guide in English - Page 1
Set up RP-AX56 as a repeater If you would like to connect RP-AX56 to other WiFi networks excluding AiMesh-supported routers, please follow any one of the following two methods to download the ASUS Extender App. METHOD 1 Download the ASUS Extender App and follow the onscreen instructions to finish - Asus RP-AX56 | QSG Quick Start Guide in English - Page 2
instructions to finish setting up your node. Download the ASUS Router App Internet Add Node Set up new network Add AiMesh node Share guest network TROUBLE SHOOTING If your AiMesh router cannot find RP-AX56 supports uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
-
1 -
2
 |
 |
Placing your RP-AX56
Plug your RP-AX56 into a power outlet near
your router/AP.
Check the LEDs and see the
LED explanations
.
METHOD
1
Download the ASUS Extender App and follow the onscreen instructions
to finish the setup.
METHOD
2
Connect via WPS
Press the WPS button on your router/
AP.
Press the WPS button on your
RP-AX56 for more than two (2)
seconds until the LED starts to
blink blue.
RP-AX56
Dual-Band Wireless Repeater
Quick
Start Guide
Hardware Explanations
Button Explanations
RESET BUTTON
Reset the system to its factory default settings.
WPS BUTTON
Launch the WPS Wizard.
LAN PORT
Connect your PC to the LAN port with a network cable.
BEFORE SETUP
SETUP METHODS
WE SUGGEST…
Set up RP-AX56 as a repeater
1
Plug RP-AX56 into a power outlet.
2
The LED will start breathing white for 3 seconds while booting
up.
LAN
port
LED
WPS button
reset button
LED Explanations
Repeater Mode
Status
LED Behavior
Booting up
Blinking White
Booting up complete (haven’t
connected to Router)
Solid Blue
Reset (use a pin to press the
reset button for 5 seconds)
Blinking Yellow
Rescue mode
Solid Purple
Starting WPS
Blinking Blue
Connected to the router with
Good Signal
Solid White
Conneccted to the router with
Weak Signal
Solid Yellow
No Signal
Solid Red
AP mode (with wired
connection)
Solid White
AP mode (without wired
connection)
Solid Red
AiMesh Mode
Status
LED Behavior
Booting up
Blinking White
Booting up complete (not
connected to AiMesh Router)
Solid Blue
Reset (use a pin to press the
reset button for 5 seconds)
Blinking Yellow
Rescue mode
Solid Purple
Connecting to the AiMesh Router
Blinking Blue
Connected to the AiMesh Router
with Good Signal
Solid White
Connected to the AiMesh Router
with Weak Signal
Solid Yellow
No Signal
Solid Red
Ethernet backhaul
Solid White
Wait for the LED to flash and turn solid blue,
indicating that your RP-AX56 is ready to connect
to your existing router/AP.
around
2 meters
3
If you would like to connect RP-AX56 to other WiFi networks excluding AiMesh-supported routers, please follow any one
of the following two methods to download the ASUS Extender App.
1
2
01
1
2