Asus RS500-E8-PS4 V2 User Guide

Asus RS500-E8-PS4 V2 Manual

Get Asus RS500-E8-PS4 V2 PDF manuals and user guides View all Asus RS500-E8-PS4 V2 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus RS500-E8-PS4 V2 manual content summary:

  • Asus RS500-E8-PS4 V2 | User Guide - Page 1
    RS500-E8 V2 Series RS500-E8-PS4 V2 RS500-E8-RS4 V2 1U Rackmount Server User Guide
  • Asus RS500-E8-PS4 V2 | User Guide - Page 2
    , and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. Product warranty or service will not be extended if: (1) the product is repaired
  • Asus RS500-E8-PS4 V2 | User Guide - Page 3
    Safety information...viii Australia statement notice ix About this guide...x Chapter 1: Product Introduction 1.1 System package contents 1-2 Installing an expansion card to the riser card bracket 2-15 2.5.2 Installing an ASUS PIKE II card 2-16 2.5.3 Installing an M.2 expansion card 2-20 2.5.4
  • Asus RS500-E8-PS4 V2 | User Guide - Page 4
    ...4-4 4.3 Internal connectors 4-8 4.4 Onboard LEDs 4-18 Chapter 5: BIOS Setup 5.1 Managing and updating your BIOS 5-2 5.1.1 ASUS CrashFree BIOS 3 utility 5-2 5.1.2 ASUS EZ Flash 2 Utility 5-3 5.1.3 BUPDATER utility 5-4 5.2 BIOS setup program 5-6 5.2.1 BIOS menu screen 5-7 5.2.2 Menu bar
  • Asus RS500-E8-PS4 V2 | User Guide - Page 5
    5.5.6 IIO Configuration 5-33 5.5.7 PCH Configuration 5-34 5.5.8 Miscellaneous Configuration 5-38 5.5.9 Server ME Configuration 5-38 5.5.10 Runtime Error Logging Support 5-39 5.6 Server Mgmt menu 5-39 5.7 Event Logs menu 5-44 5.7.1 Change Smbios Event Log Settings 5-44 5.7.2 View Smbios Event
  • Asus RS500-E8-PS4 V2 | User Guide - Page 6
    controller driver 7-4 7.2 Management applications and utilities installation 7-14 7.3 Running the Support DVD 7-14 7.4 Intel® chipset device software installation 7-18 7.5 Installing the Intel® Rapid Storage Technology enterprise 4.0 installation 7-25 Appendix ASUS contact information A-2 vi
  • Asus RS500-E8-PS4 V2 | User Guide - Page 7
    frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no , we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. vii
  • Asus RS500-E8-PS4 V2 | User Guide - Page 8
    to fix it by yourself. Contact a qualified service technician or your dealer. Operation Safety • Any operating the server, carefully read all the manuals included with the server package. • Before used batteries according to the manufacturer's instructions. CD-ROM Drive Safety Warning CLASS
  • Asus RS500-E8-PS4 V2 | User Guide - Page 9
    Australian Consumer Law. For the latest product warranty details please visit http:// support.asus.com. Our goods come with guarantees that cannot be excluded under the failure. If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://support.asus.com ix
  • Asus RS500-E8-PS4 V2 | User Guide - Page 10
    users with at least basic knowledge of configuring a server. Contents This guide contains the following parts: 1. Chapter 1: Product Introduction This chapter describes 7: Driver Installation This chapter provides instructions for installing the necessary drivers for different system components. x
  • Asus RS500-E8-PS4 V2 | User Guide - Page 11
    for product and software updates. 1. ASUS Server Web-based Management (ASWM) user guide This manual tells how to set up and use the proprietary ASUS server management utility. 2. ASUS websites The ASUS websites worldwide provide updated information for all ASUS hardware and software products. Refer
  • Asus RS500-E8-PS4 V2 | User Guide - Page 12
    xii
  • Asus RS500-E8-PS4 V2 | User Guide - Page 13
    Chapter 1: Product Introduction Product Introduction This chapter describes the motherboard features and the new technologies it supports. 1
  • Asus RS500-E8-PS4 V2 | User Guide - Page 14
    Support DVD 1 x ASWM* DVD 1 x ASMB8 DVD Accessories 1 x Bag of Screws 1 x AC Power Cable (RS500-E8-PS4 V2) 2 x AC Power Cable (RS500-E8-RS4 V2) 2 x CPU Heatsink Optional Items 1 x Tool-less Friction Rail Kit DVD-ROM/DVD-RW Second 770W Redundant Power Supply Module (RS500-E8-RS4 V2) *ASUS
  • Asus RS500-E8-PS4 V2 | User Guide - Page 15
    containing 12 characters such as xxS0xxxxxxxx shown as the figure below. With the correct serial number of the product, ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. RS500-E8-PS4 V2, RS500-E8-RS4 V2 xxS0xxxxxxxx ASUS RS500-E8 V2 Series 1-3
  • Asus RS500-E8-PS4 V2 | User Guide - Page 16
    The ASUS RS500-E8 V2 Series is a 1U barebone server system featuring the ASUS Z10PR-D16 Server Board. The server supports Intel® LGA2011-3 Intel® Xeon® E5-2600 Processor v3 plus other latest technologies through the chipsets onboard. Model Name RS500-E8-PS4 V2 RS500-E8-RS4 V2 Processor Support
  • Asus RS500-E8-PS4 V2 | User Guide - Page 17
    Support RS500-E8-PS4 V2 RS500-E8-RS4 V2 1 x TPM Header 1 x 24-pin SSI power connector + 8-pin SSI 12V + 8-pin SSI 12V 1 x External Serial Port (RS500-E8-PS4 V2) 3 x RJ-45 ports (1 for ASMB8-iKVM Non condensing) *Specifications are subject to change without notice. ASUS RS500-E8 V2 Series 1-5
  • Asus RS500-E8-PS4 V2 | User Guide - Page 18
    1.4 Front panel features The barebone server displays a simple yet stylish front panel with easily accessible features. The power and reset buttons, LED indicators, and USB port for each Node are located on the front panel. Refer to the Front panel LEDs section for the LED descriptions. Rack screw
  • Asus RS500-E8-PS4 V2 | User Guide - Page 19
    LED RS500-E8-PS4 V2 PS/2 keyboard/mouse port LAN port 3* SFP+ port (optional mezzanine) VGA port Serial COM port Gigabit LAN port 2 Gigabit LAN port 1 USB 3.0 ports Q-Code LED SFP+ port (optional mezzanine) VGA port * This port is for ASUS ASMB8-iKVM controller only. ASUS RS500-E8 V2 Series
  • Asus RS500-E8-PS4 V2 | User Guide - Page 20
    1.6 Internal features The barebone server includes the basic components as shown. 1. Power supply and power fan 2. PCI Express slot Riser Card 3. ASUS Z10PR-D16 Server Board 4. System fans 5. SAS / SATA backplane (hidden) 6. HDD tray 1-Connect to SATA1 port 7. HDD tray 2-Connect to SATA2 port 8. HDD
  • Asus RS500-E8-PS4 V2 | User Guide - Page 21
    2. With ASMB8-iKVM installed: a hardware monitor event is indicated OFF No LAN connection Blinking LAN is transmitting or receiving data 3 ON 4 LAN connection is present ON Location switched is pressed. OFF Normal status. (Press the location switch again to turn off.) ASUS RS500-E8 V2 Series
  • Asus RS500-E8-PS4 V2 | User Guide - Page 22
    1.7.2 LAN (RJ-45) LEDs ACT/LINK LED SPEED LED ACT/LINK LED Status Description OFF No link GREEN Linked BLINKING Data activity 1.7.3 HDD status LED HDD status LED SPEED LED Status Description OFF 10 Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection HDD activity
  • Asus RS500-E8-PS4 V2 | User Guide - Page 23
    Chapter 2: Hardware Information Hardware Information This chapter lists the hardware setup procedures that you have to perform when installing or removing system components. 2
  • Asus RS500-E8-PS4 V2 | User Guide - Page 24
    2.1 Chassis cover Removing the rear cover 1. Locate and remove the front side screws. Front side screw 2. Loosen the two thumbscrews on the rear panel to release the rear cover from the chassis. Thumbscrews 3. Firmly hold the cover and slide it toward the rear panel for about half an inch until it
  • Asus RS500-E8-PS4 V2 | User Guide - Page 25
    if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS shoulders the repair cost only if the damage is shipment/transitrelated. • Keep the cap after installing the cap. 2.2.1 Installing the CPU To install a CPU: 1. Remove the air duct. ASUS RS500-E8 V2 Series 2-3
  • Asus RS500-E8-PS4 V2 | User Guide - Page 26
    2. Remove the pre-installed heatsink. 3. Locate the CPU socket on the motherboard. Before installing the CPU, ensure that the socket box is facing toward you and the triangle mark is on the lower-left position. triangle mark 2-4 Chapter 2: Hardware Information
  • Asus RS500-E8-PS4 V2 | User Guide - Page 27
    left load lever (D), move it to the right (E) until it is released from then retention tab (F), then gently pull it until it is fully extended. ASUS RS500-E8 V2 Series 2-5
  • Asus RS500-E8-PS4 V2 | User Guide - Page 28
    edge then gently lift the load plate (H). edge of the Load plate Load plate Load lever 8. Carefully remove the PnP cap. Keep the PnP cap. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the PnP cap on the LGA 2011 socket. PnP cap 2-6 Chapter
  • Asus RS500-E8-PS4 V2 | User Guide - Page 29
    the CPU pins on the socket. Triangle mark 12. Gently push the load plate just enough to let it sit on top of the CPU. ASUS RS500-E8 V2 Series 2-7
  • Asus RS500-E8-PS4 V2 | User Guide - Page 30
    13. Push the right load lever down (I) ensuring that the edge of the load plate is fixed and tucked securely under the lever (J), then insert the right load lever under the retention tab (K). edge of load plate Load lever Retention tab 14. Install the heatsink. 2-8 Chapter 2: Hardware
  • Asus RS500-E8-PS4 V2 | User Guide - Page 31
    motherboard labeled CPU_FAN1 / CPU_FAN2. DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. ASUS RS500-E8 V2 Series 2-9
  • Asus RS500-E8-PS4 V2 | User Guide - Page 32
    2.3 System memory 2.3.1 Overview The motherboard comes with sixteen (16) Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets: 2.3.2 Memory Configurations You may install 4 GB, 8 GB, 16 GB, and 32 GB RDIMMs or 32 GB, 64 GB
  • Asus RS500-E8-PS4 V2 | User Guide - Page 33
    (CPU2) A2 A1 B2 B1 C2 C1 D2 D1 E2 E1 F2 F1 G2 G1 H2 H1 2 DIMMs P P 4 DIMMs P P P P 8 DIMMs P P P P P P P P 12 DIMMs P P P P P PPPPP P P 16 DIMMs P P P P P P P P P P P P P P P P ASUS RS500-E8 V2 Series 2-11
  • Asus RS500-E8-PS4 V2 | User Guide - Page 34
    prevent DIMM notch damage. 2.4.4 Removing a DIMM 1. Simultaneously press the retaining clips outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force
  • Asus RS500-E8-PS4 V2 | User Guide - Page 35
    2.4 Hard disk drives The system supports four hot-swap SATAIII/SAS hard disk drives and two SATAII hard disk drives. The hard disk drive installed on the three holes to fit different types of hard disk drives. Use two screws on each side to secure the hard disk drive. ASUS RS500-E8 V2 Series 2-13
  • Asus RS500-E8-PS4 V2 | User Guide - Page 36
    4. Place a SATA/SAS hard disk drive on the tray, then secure it with four screws. 5. Carefully insert the drive tray and push it all the way to the depth of the bay until just a small fraction of the tray edge protrudes. When installed, the SATA/SAS connector on the drive connects to the SATA/SAS
  • Asus RS500-E8-PS4 V2 | User Guide - Page 37
    secure the card with a screw. 4. Install the riser card bracket and PCI Express card assembly back into the PCI Express x16 slot on the motherboard. 4 ASUS RS500-E8 V2 Series 2-15
  • Asus RS500-E8-PS4 V2 | User Guide - Page 38
    II card on the provided PCI-E slot onboard. To install an ASUS PIKE II card: 1. Remove two screws on the riser card bracket and put it aside, then remove the riser card bracket. 2. Remove the screw that
  • Asus RS500-E8-PS4 V2 | User Guide - Page 39
    card into the PCI-E slot. Ensure that the golden fingers are totally inserted into the slot, then secure the ASUS PIKE II card with the screw removed before. 5. Connect the mini-SAS HD cable to connector 1 of the ASUS PIKE II card. connect to PIKE II connector 1 ASUS RS500-E8 V2 Series 2-17
  • Asus RS500-E8-PS4 V2 | User Guide - Page 40
    6. Remove two screws from each side of the HDD module and remove the metal cover 7. Remove the default cable from the motherboard and the backplane. 2-18 Chapter 2: Hardware Information
  • Asus RS500-E8-PS4 V2 | User Guide - Page 41
    8. Connect the mini SAS HD cable to the backplane. 9. Replace the metal cover and secure it with the screws removed before. 10. Reinstall the riser card bracket and secure it with two screws. ASUS RS500-E8 V2 Series 2-19
  • Asus RS500-E8-PS4 V2 | User Guide - Page 42
    2.5.3 Installing an M.2 expansion card You can install an M.2 expansion card on the provided M.2 slot onboard. To install an M.2 expansion card: 1. Remove the screw on the M.2 socket and put it aside. 2. Prepare your M.2 expansion card. 3. Align and insert the M.2 card into the M.2 slot onboard as
  • Asus RS500-E8-PS4 V2 | User Guide - Page 43
    2.5.4 Installing a Mezzanine card You can install a supported Mezzanine card on the onboard slot. To install a Mezzanine card: 1. Remove the slot bay from the insert the Mezzanine card to the slot on the motherboard. screw holes LAN ports LAN port slots ASUS RS500-E8 V2 Series stand screws 2-21
  • Asus RS500-E8-PS4 V2 | User Guide - Page 44
    4. Secure the Mezzanine card with the four (4) bundled screws. 5. Connect the signal end (black) to the OCP_LED1 header on the motherboard. OCP_LED1 The two ends of the signal cable are different in size and color for easy recognition. Please refer to your exact cable. 2-22 Chapter 2: Hardware
  • Asus RS500-E8-PS4 V2 | User Guide - Page 45
    Mouse Port 13 8 Numeric Data Processor 14* 9 Primary IDE Channel 15* 10 Secondary IDE Channel * These IRQs are usually available for ISA or PCI devices. ASUS RS500-E8 V2 Series 2-23
  • Asus RS500-E8-PS4 V2 | User Guide - Page 46
    fan connector (from system fan to motherboard) 4. USB connector (from motherboard to front I/O board) 5. SATA ports (miniSAS connector support) connectors (system default; from motherboard to SATA/SAS backplane) 6. System auxiliary panel connector (from motherboard to front I/O board) 7. System
  • Asus RS500-E8-PS4 V2 | User Guide - Page 47
    2.7 SATA/SAS backplane cabling BP8LX12G-25-R10E Connects an 8-pin plug from power supply Connects the data cables connected to the motherboard Connect the SATAIII/SAS HDDs ASUS RS500-E8 V2 Series 2-25
  • Asus RS500-E8-PS4 V2 | User Guide - Page 48
    2.8 Removable/optional components You may need to remove previously installed system components when installing or removing system devices. Or you may need to install the optional components into the system. This section tells how to remove/install the system fans: Ensure that the system is turned
  • Asus RS500-E8-PS4 V2 | User Guide - Page 49
    Chapter 3: Installation Options Installation Options This chapter describes how to install the optional components and devices into the barebone server. 3
  • Asus RS500-E8-PS4 V2 | User Guide - Page 50
    The kit also comes with a metal stopping bracket that can be installed to provide additional support and stability to the server. The tool-less rail kit package includes: Fixing latches Set different server models. Refer to your server user manual for details. 3-2 Chapter 3: Installation Options
  • Asus RS500-E8-PS4 V2 | User Guide - Page 51
    post. 6. Perform steps 3 to 5 for the other rack rail. Ensure that the installed rack rails (left and right) are aligned, secured, and stable in place. ASUS RS500-E8 V2 Series 3-3
  • Asus RS500-E8-PS4 V2 | User Guide - Page 52
    posts are stable and standing firmly on a level surface. • We strongly recommend that at least two able-bodied persons perform the steps described in this guide. • We recommend the use an appropriate lifting tool or device, if necessary. Ensure to include the side knots on the two sides of the
  • Asus RS500-E8-PS4 V2 | User Guide - Page 53
    Chapter 4: Motherboard Information 4 Motherboard Information This chapter includes the motherboard layout and brief descriptions of the jumpers and internal connectors.
  • Asus RS500-E8-PS4 V2 | User Guide - Page 54
    4.1 Motherboard layout Layout contents Jumpers 1. Clear RTC RAM (3-pin CLRTC1) 2. VGA controller setting (3-pin VGA_SW1) 3. LAN controller setting (3-pin LAN_SW1, LAN_SW2) 4. ME firmware force recovery setting (3-pin ME_RCVR1) 5. DDR4 thermal event setting (3-pin DIMMTRIP1) 6. RAID
  • Asus RS500-E8-PS4 V2 | User Guide - Page 55
    , MEMERRG1, MEMERRG2, MEMERRH1, MEMERRH2) 6. CATT LED (CATTERR_LED1) 7. Message LED (MESLED1) 8. OCPLAN Activity LED connector (4-pin OCP_LED1) Page 4-18 4-18 4-19 4-19 4-20 4-20 4-21 4-21 ASUS RS500-E8 V2 Series 4-3
  • Asus RS500-E8-PS4 V2 | User Guide - Page 56
    4.2 Jumpers 1. Clear RTC RAM (3-pin CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS which include
  • Asus RS500-E8-PS4 V2 | User Guide - Page 57
    (3-pin LAN_SW1, LAN_SW2) These jumpers allow you to enable or disable the onboard LAN_SW1 or LAN_SW2. Set to pins 1-2 to activate the Gigabit LAN feature. ASUS RS500-E8 V2 Series 4-5
  • Asus RS500-E8-PS4 V2 | User Guide - Page 58
    4. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel® Management Engine (ME) boot from recovery mode when ME becomes corrupted. 5. DDR4 thermal event setting (3-pin DIMMTRIP1) This jumper allows you to enable or disable DDR4 DIMM thermal sensing event pin.
  • Asus RS500-E8-PS4 V2 | User Guide - Page 59
    Intel® Rapid Storage Technology enterprise SATA Option ROM Utility. 7. BMC Setting (3-pin BMC_EN1) This jumper allows you to enable or disable the Baseboard Management Controller (ASMB8). ASUS RS500-E8 V2 Series 4-7
  • Asus RS500-E8-PS4 V2 | User Guide - Page 60
    connectors 1. Serial ATA 6.0 / 3.0 Gbps connector (7-pin SATA6 [Light Blue]) Supported by the Intel® 610 series Chipset, this connector is for the Serial ATA signal using the SMBus interface. This connector functions only when you install the ASUS ASMB8. 4-8 Chapter 4: Motherboard Information
  • Asus RS500-E8-PS4 V2 | User Guide - Page 61
    the USB module cables to connectors USB56. These USB connectors comply with USB 2.0 specification that supports up to 480 Mb/s connection speed. 4. USB 3.0 connector (20-1 pin USB3_34) This devices, optimized power efficiency, and backward compatibility with USB 2.0. ASUS RS500-E8 V2 Series 4-9
  • Asus RS500-E8-PS4 V2 | User Guide - Page 62
    FRNT_FAN3, FRNT_FAN4, FRNT_FAN5, REAR_FAN1, REAR_FAN2) The fan connectors support cooling fans. Connect the fan cables to the fan connectors NOT place jumper caps on the fan connectors! • All fans feature the ASUS Smart Fan technology. 6. LAN Activity LED connector (5-1 pin LAN34_LED1) These leads
  • Asus RS500-E8-PS4 V2 | User Guide - Page 63
    (20-1 pin TPM1) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. ASUS RS500-E8 V2 Series 4-11
  • Asus RS500-E8-PS4 V2 | User Guide - Page 64
    a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • This motherboard supports ATX2.0 PSU or later version. • Ensure that your PSU can provide at least the minimum power required by your system. 4-12 Chapter 4: Motherboard
  • Asus RS500-E8-PS4 V2 | User Guide - Page 65
    10. System panel connector (20-1 pin PANEL1) This connector supports several chassis-mounted functions. 1. System power LED (3-pin PLED) This 3-pin connector is for is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS RS500-E8 V2 Series 4-13
  • Asus RS500-E8-PS4 V2 | User Guide - Page 66
    11. Auxiliary panel connector (20-2 pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. 1. Front panel SMB (10-2 pin FPSMB) These connectors are for the front panel SMBus cable. 2. LAN activity LED
  • Asus RS500-E8-PS4 V2 | User Guide - Page 67
    12. VGA connector (10-1 pin VGA_HDR1) This connector supports the VGA High Dynamic-Range interface. 13. Hard disk activity LED connector (4-pin HDLED1) This LED connector is for any device connected to the SATA or SAS add-on card causes the front panel LED to light up. ASUS RS500-E8 V2 Series 4-15
  • Asus RS500-E8-PS4 V2 | User Guide - Page 68
    and GND pin by jumper cap to disable the function. 15. ISATA & ISSATA connectors (ISATA; ISSATA) The ISATA connector (AHCI) supports 4 SATA 6Gb/s ports and Intel RAID/LSI MegaRAID. The ISSATA connector (AHCI) supports 4 SATA 6Gb/s ports and Intel RAID. 4-16 Chapter 4: Motherboard Information
  • Asus RS500-E8-PS4 V2 | User Guide - Page 69
    allows you to install an M.2 device. This connector supports type 2242 devices on both PCI-E and SATA interface. The M.2 (NGFF) device is purchased separately 17. Mezzanine PCI card connector (MEZZ1) The MEZZ1 connector supports Open Compute Project (OCP) cards. ASUS RS500-E8 V2 Series 4-17
  • Asus RS500-E8-PS4 V2 | User Guide - Page 70
    illustration below shows the location of the onboard LED. 2. Baseboard Management Controller LED (BMCLED1) The green heartbeat LED blinks per second to indicate that the ASMB8 is working normally. The heartbeat LED functions only when you install the
  • Asus RS500-E8-PS4 V2 | User Guide - Page 71
    is pressed or when triggered by a system management software. The Location LED helps visually locate and quickly identify the server in error on a server rack. ASUS RS500-E8 V2 Series 4-19
  • Asus RS500-E8-PS4 V2 | User Guide - Page 72
    ) The DIMM warning LEDs light up to indicate failure on the corresponding DIMMs. The warning LEDs only functions when you enable the ASUS ASMB8. 6. CATT LED (CATTERR_LED1) The CATT LED indicates that the system has experienced a fatal or catastrophic error and cannot continue to operate. 4-20
  • Asus RS500-E8-PS4 V2 | User Guide - Page 73
    7. Message LED (MESLED1) This onboard LED lights up to red when there is temperature warning or a BMC event log is generated. 8. OCPLAN Activity LED connector (4-pin OCP_LED1) OCPLAN LED connector supports ASUS MCB-10G-2S OCP card Active LED. ASUS RS500-E8 V2 Series 4-21
  • Asus RS500-E8-PS4 V2 | User Guide - Page 74
    4-22 Chapter 4: Motherboard Information
  • Asus RS500-E8-PS4 V2 | User Guide - Page 75
    Chapter 5: BIOS Setup BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. 5
  • Asus RS500-E8-PS4 V2 | User Guide - Page 76
    disk drive in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the BUPDATER utility. 5.1.1 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the
  • Asus RS500-E8-PS4 V2 | User Guide - Page 77
    use a DOS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www. asus.com. To update the BIOS using EZ Flash 2 Utility 1. Insert the USB flash disk that update process. Reboot the system when the update process is done. ASUS RS500-E8 V2 Series 5-3
  • Asus RS500-E8-PS4 V2 | User Guide - Page 78
    file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com to the bootable USB flash disk drive you created earlier. 3. Boot the system in DOS mode, then at the prompt, type: BUPDATER
  • Asus RS500-E8-PS4 V2 | User Guide - Page 79
    4. The utility verifies the file, then starts updating the BIOS file. ASUS Tek. EzFlash Utility Current Platform Platform : Z10PR-D16 Version : 0401 Build Date :09/05/2013 New from the hard disk drive. The BIOS update is finished! Please restart your system. C:\> ASUS RS500-E8 V2 Series 5-5
  • Asus RS500-E8-PS4 V2 | User Guide - Page 80
    5.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. 5-6 Chapter 5: BIOS Setup
  • Asus RS500-E8-PS4 V2 | User Guide - Page 81
    options To select an item on the menu bar, press the right or left arrow key on the keyboard until the desired item is highlighted. ASUS RS500-E8 V2 Series 5-7
  • Asus RS500-E8-PS4 V2 | User Guide - Page 82
    5.2.3 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Event Logs, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. 5.2.4 Submenu items A solid
  • Asus RS500-E8-PS4 V2 | User Guide - Page 83
    . 5.3.1 System Date [Day xx/xx/xxxx] Allows you to set the system date. 5.3.2 System Time [xx:xx:xx] Allows you to set the system time. ASUS RS500-E8 V2 Series 5-9
  • Asus RS500-E8-PS4 V2 | User Guide - Page 84
    5.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 5-10 Chapter 5: BIOS Setup
  • Asus RS500-E8-PS4 V2 | User Guide - Page 85
    with some OS. 5.4.2 Smart Settings SMART Self Test [Disabled] Allows you to run SMART Self Test on all HDDs during POST. Configuration options: [Disabled] [Enabled] ASUS RS500-E8 V2 Series 5-11
  • Asus RS500-E8-PS4 V2 | User Guide - Page 86
    5.4.3 NCT6779D Super IO Configuration Serial Port 1 / Serial Port 2 Configuration Allows you to set the parameters of Serial Port 1/ Serial Port 2. Serial Port [Enabled] Allows you to enable or disable Serial Port. Configuration options: [Disabled] [Enabled] Change Settings [Auto] Allows you to
  • Asus RS500-E8-PS4 V2 | User Guide - Page 87
    Intel LAN. Configuration options: [Disabled] [Enabled] Intel LAN ROM Type [PXE] Allows you to select the Intel LAN ROM type. Configuration options: [Disabled] [PXE] [iSCSI] ASUS RS500-E8 V2 Series 5-13
  • Asus RS500-E8-PS4 V2 | User Guide - Page 88
    the same or compatible settings. Terminal Type [VT-UTF8] Allows you to set the terminal type. [VT100] ASCII char set. [VT100+] Extends VT100 to support color, function keys, et. [VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or more bytes [ANSI] Extended ASCII char set Bits per
  • Asus RS500-E8-PS4 V2 | User Guide - Page 89
    of rows and columns supported on the Legacy OS. Services (EMS) Console Redirection [Disabled] Allows you to enable or disable the console redirection feature. Configuration options: [Disabled] [Enabled] The following item appears only when you set Console Redirection to [Enabled]. ASUS RS500-E8 V2
  • Asus RS500-E8-PS4 V2 | User Guide - Page 90
    OS through a serial port. Configuration options: [VT100] [VT100+] [VT-UTF8] [ANSI] Bits per second [115200] Microsoft Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through a serial port. Configuration options: [9600] [19200] [57600] [115200] Flow
  • Asus RS500-E8-PS4 V2 | User Guide - Page 91
    generate a wake event. [Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ Minute/Second will become user-configurable with set values. ASUS RS500-E8 V2 Series 5-17
  • Asus RS500-E8-PS4 V2 | User Guide - Page 92
    decoded in above 4G address space. It only works if the system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] SR-IOV Support [Disabled] This option enables or disables SIngle Root IO Virtualization Support if the system has SRIOV capable PCIe devices. Configuration options
  • Asus RS500-E8-PS4 V2 | User Guide - Page 93
    the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be created. Configuration options: [Disabled] [Enabled]. PXE boot wait time [0] Wait time to press ESC key to abort the PXE boot. Media detect time [0] Wait time (in seconds) to detect media. ASUS RS500-E8 V2 Series 5-19
  • Asus RS500-E8-PS4 V2 | User Guide - Page 94
    [Enabled] This option allows you to enable or disable CSM Support. Configuration options: [Disabled] [Enabled] GateA20 Active [Upon Request] This allows you to set the GA20 option. Configuration options: [Upon Request] [Always] Option ROM Messages [Force
  • Asus RS500-E8-PS4 V2 | User Guide - Page 95
    5.4.10 Trusted Computing Configuration Security Device Support [Disabled] Allows you to enable or disable the BIOS support for security device. Configuration options: [Disabled] [Enabled] ASUS RS500-E8 V2 Series 5-21
  • Asus RS500-E8-PS4 V2 | User Guide - Page 96
    change should be claimed by XHCI driver. Configuration options: [Disabled] [Enabled] EHCI Hand-off [Disabled] This is a workaround for 0Ses without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. Configuration options: [Disabled] [Enabled] USB Mass Storage Driver
  • Asus RS500-E8-PS4 V2 | User Guide - Page 97
    power-up delay [Auto] This is the maximum time the device will take before it properly reports itself to the host controller. Configuration options: [Auto] [Manual] 5.4.12 iSCSI Configuration Allows you to configure the iSCSi parameters. ASUS RS500-E8 V2 Series 5-23
  • Asus RS500-E8-PS4 V2 | User Guide - Page 98
    5.5 IntelRCSetup menu 5-24 Chapter 5: BIOS Setup
  • Asus RS500-E8-PS4 V2 | User Guide - Page 99
    [Enabled] Enable Intel TXT Support [Disabled] Forces the XD feature log to always return 0 when disabled. Configuration options: [Disabled] [Enabled] VMX [Enabled] Enables the Vanderpool Technology. Takes effect after reboot. Configuration options: [Disabled] [Enabled] ASUS RS500-E8 V2 Series 5-25
  • Asus RS500-E8-PS4 V2 | User Guide - Page 100
    . Configuration options: [Disabled] [Enabled] AES-NI [Enabled] This Item allows you to enable or disable the AES-NI support. Configuration options: [Disabled] [Enabled] Down Stream PECI [Disabled] This Item allows you to enable the PCIe Down Stream PECI writer. Configuration options: [Disabled
  • Asus RS500-E8-PS4 V2 | User Guide - Page 101
    Bias setting [Balanced Performance] Allows you to set the Energy Performance Bias which overrides the OS setting. Configuration options: [Performance] [Balanced Performance] [Balanced Power] [Power] ASUS RS500-E8 V2 Series 5-27
  • Asus RS500-E8-PS4 V2 | User Guide - Page 102
    Power/Performance Switch [Enabled] Allows you to switch between Power or performance. Configuration options: [Disabled] [Enabled] Workload Configuration [Balanced] Optimization for the workload characterization. Configuration options: [Balanced] [I/O sensitive] Averaging Time Window [23] This is
  • Asus RS500-E8-PS4 V2 | User Guide - Page 103
    frequency Configuration options: [Auto] [6.4 GT/s] [8.0 GT/s] [9.6 GT/s] QPI Link0p Enable [Enable] Configuration options: [Disable] [Enable] QPI Link1 Enable [Enable] Configuration options: [Disable] [Enable] QPI Status ASUS RS500-E8 V2 Series 5-29
  • Asus RS500-E8-PS4 V2 | User Guide - Page 104
    [Enabled] Allows you to enable or disable halt on mem Training Error. Configuration options: [Disabled] [Enabled] ECC Support [Auto] Allows you to enable or disable the ECC support. Configuration options: [Auto] [Disabled] [Enabled] Enhanced Log Parsing [Disabled] Allows you to enable or disable the
  • Asus RS500-E8-PS4 V2 | User Guide - Page 105
    options: [Auto] [Disabled] [Enabled] MEMHOT Throttling Mode [Input-only] Allows you to shutdown MDLL during SR when enabled. Configuration options: [Disabled] [Input-only] [Output-only] ASUS RS500-E8 V2 Series 5-31
  • Asus RS500-E8-PS4 V2 | User Guide - Page 106
    Interleave] Memory RAS Configuration RAS Mode [Disabled] Allows you to enable or disable RAS Modes. Enabling Sparing and Mirroring is not supported. In case enabled, Sparing will be selected. Configuration options: [Disabled] [Mirror] [Lockstep Mode] Memory Rank Sparing [Disabled] Allows you to
  • Asus RS500-E8-PS4 V2 | User Guide - Page 107
    I/O. Configuration options: [Disabled] [Enabled] PCI Express Global Options TX EQ WA [Enabled] Use special table for TX_EQ and vendor specific cards. Configuration options: [Disabled] [Enabled] ASUS RS500-E8 V2 Series 5-33
  • Asus RS500-E8-PS4 V2 | User Guide - Page 108
    (Global) [L1 Only] This option enables or disables the ASPM support for all downstream devices. Configuration options: [Disabled] [L1 Only] 5.5.7 PCH Configuration PCH Devices DeepSx Power Policies [Disabled] Allows you to configure the DeepSx Mode configuration.
  • Asus RS500-E8-PS4 V2 | User Guide - Page 109
    ] If enabled, LED/SGPIO hardware is attached. Configuration options: [Disabled] [Enabled] Support Aggressive Link Power Management [Enabled] Allows you to enable or disable the Support Aggressive Link Power (SALP) Management. Configuration options: [Disabled] [Enabled] ASUS RS500-E8 V2 Series 5-35
  • Asus RS500-E8-PS4 V2 | User Guide - Page 110
    connected to Solid State Drive or Hard Disk Drive. Configuration options: [IDE] [AHCI] [RAID] Support Aggressive Link Power Management [Enabled] Allows you to enable or disable the Support Aggressive Link Power (SALP) Management. Configuration options: [Disabled] [Enabled] SATA Port 1~6 Port 1/ Port
  • Asus RS500-E8-PS4 V2 | User Guide - Page 111
    ] [Enabled] Platform Thermal Configuration PCH Thermal Device [Auto] Allows you to enable or disable the PCH Thermal Device (D31:F6). Configuration options: [Auto] [Disabled] [Enabled] ASUS RS500-E8 V2 Series 5-37
  • Asus RS500-E8-PS4 V2 | User Guide - Page 112
    Alert Enable Lock [Disabled] Allows you to lock all Alert Enable settings. Configuration options: [Disabled] [Enabled] 5.5.8 Miscellaneous Configuration Active Video [Offboard Device] Allows you to select the video type. Configuration options: [Onboard Device] [Offboard Device] 5.5.9 Server ME
  • Asus RS500-E8-PS4 V2 | User Guide - Page 113
    [Disabled] This item allows you to enable or disable the WHEA support. Configuration options: [Disabled] [Enabled] 5.6 Server Mgmt menu The Server Management menu displays the ] The following items is configurable only when the OS Watchdog Timer is set to [Enabled]. ASUS RS500-E8 V2 Series 5-39
  • Asus RS500-E8-PS4 V2 | User Guide - Page 114
    OS Wtd Timer Timeout [10 minutes] Allows you to configure the length of the OS Boot Watchdog Timer. Configuration options: [5 minutes] [10 minutes] [15 minutes] [20 minutes] OS Wtd Timer Policy [Reset] This item allows you to configure the how the system should respond if the OS Boot Watch Timer
  • Asus RS500-E8-PS4 V2 | User Guide - Page 115
    enable or disable the IPv6 BMC LAN channel function. Disabling this item will not modify any BMC network during BIOS phase. Configuration options: [Disable] [Enable] ASUS RS500-E8 V2 Series 5-41
  • Asus RS500-E8-PS4 V2 | User Guide - Page 116
    IPv6 BMC LAN IP Address source [Previous State] Select to configure LAN channel parameters statically or dynamically(by BIOS or BMC). Configuration options: [Previous State] [Static] [Dynamic-Obtained by BMC running DHCP] The following items appear only when you set IP BMC Lan IP Address Source to
  • Asus RS500-E8-PS4 V2 | User Guide - Page 117
    enter IPv6 BMC LAN Link IP address. IPv6 BMC LAN Link IP Prefix Length Allows you to input IPv6 BMC Lan Link IP Prefix Length. ASUS RS500-E8 V2 Series 5-43
  • Asus RS500-E8-PS4 V2 | User Guide - Page 118
    5.7 Event Logs menu The Event Logs menu items allow you to change the event log settings and view the system event logs. 5.7.1 Change Smbios Event Log Settings Press to change the Smbios Event Log configuration. All values changed here do not take effect until computer is restarted.
  • Asus RS500-E8-PS4 V2 | User Guide - Page 119
    to Standard Smbios Types (Not all may be translated). Configuration options: [Disabled] [Enabled] 5.7.2 View Smbios Event Log Press to view all smbios event logs. ASUS RS500-E8 V2 Series 5-45
  • Asus RS500-E8-PS4 V2 | User Guide - Page 120
    appears only when CPU FAN1&2 FRNT FAN1 mode is set to [Manual Mode]. This item allows you to configure the fan duty setting from 10% to 100%. FRNT FAN2&3/4&5; REAR FAN1&2 mode [Generic Mode] Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient
  • Asus RS500-E8-PS4 V2 | User Guide - Page 121
    . To clear the administrator password, follow the same steps as in changing an administrator password, but press when prompted to create/confirm the password. ASUS RS500-E8 V2 Series 5-47
  • Asus RS500-E8-PS4 V2 | User Guide - Page 122
    User Password To set a user password: 1. Select the User Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change a user password: 1. Select the User Password item and press . 2. From the
  • Asus RS500-E8-PS4 V2 | User Guide - Page 123
    )/ Key Exchange Key (KEK)/ Authorized Signatures (DB)/Authorized TimeStamps (DBT)/ Forbidden Signatures (DBX) Configuration options: [Delete] [Set New] [Append] Configuration options: [Set New] [Delete] [Append] ASUS RS500-E8 V2 Series 5-49
  • Asus RS500-E8-PS4 V2 | User Guide - Page 124
    5.10 Boot menu The Boot menu items allow you to change the system boot options. Setup Prompt Timeout [xx] Use the and keys to adjust the number of seconds to wait for setup activation key. Bootup NumLock State [On] Allows you to select the power-on state for the NumLock. Configuration
  • Asus RS500-E8-PS4 V2 | User Guide - Page 125
    menu items allow you to configure options for special functions. Select an item then press to display the submenu. ASUS EZ Flash Allows you to run ASUS EZ Flash BIOS ROM Utility when you press . Refer to the ASUS EZ Flash Utility section for details. ASUS RS500-E8 V2 Series 5-51
  • Asus RS500-E8-PS4 V2 | User Guide - Page 126
    5.12 Exit menu The Exit menu items allow you to save or discard your changes to the BIOS items. Pressing does not immediately exit this menu. Select one of the options from this menu or from the legend bar to exit. Save Changes & Reset Exit System setup after saving the changes. Discard
  • Asus RS500-E8-PS4 V2 | User Guide - Page 127
    from the selected device. Launch EFI Shell from filesystem device Attempts to launch EFI Shell application (shellx64.efi) from one of the available filesystem devices. ASUS RS500-E8 V2 Series 5-53
  • Asus RS500-E8-PS4 V2 | User Guide - Page 128
    5-54 Chapter 5: BIOS Setup
  • Asus RS500-E8-PS4 V2 | User Guide - Page 129
    Chapter 6: RAID Configuration RAID Configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. 6
  • Asus RS500-E8-PS4 V2 | User Guide - Page 130
    ROM Utility with RAID 0, RAID 1, RAID 10, and RAID 5 support (for Windows OS only). 6.1.1 RAID definitions RAID 0 (Data striping) disk drive included in a created RAID set, copy first the RAID driver from the support DVD to a floppy disk before you install an operating system to the selected hard
  • Asus RS500-E8-PS4 V2 | User Guide - Page 131
    Install the SATA hard disks into the drive bays following the instructions in the system user guide. 2. Connect a SATA signal cable to the signal connector supported by the Intel® C602 chipset. Refer to the succeeding section for details on how to use the RAID configuration utility. ASUS RS500-E8 V2
  • Asus RS500-E8-PS4 V2 | User Guide - Page 132
    (s) from SATA hard disk drives connected to the SATA connectors supported by the motherboard southbridge chip. To enter the LSI MegaRAID software utility, the boot priority of the SATA optical drive has to be manually adjusted. Otherwise, the system will not boot from the connected SATA ODD
  • Asus RS500-E8-PS4 V2 | User Guide - Page 133
    In Easy Configuration, the virtual drive parameters are set automatically. In New Configuration, you manually set the virtual drive parameters. Using Easy Configuration To create a RAID set using the Easy to Navigate Between Items And Press Enter To Select An Option ASUS RS500-E8 V2 Series 6-5
  • Asus RS500-E8-PS4 V2 | User Guide - Page 134
    2. The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Use the up/down arrow keys to select the drives you want to include in the RAID set, and then press . When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number,
  • Asus RS500-E8-PS4 V2 | User Guide - Page 135
    Level RAID 0 RAID 1 Status ONLINE Choose RAID Level For This VD Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option ASUS RS500-E8 V2 Series 6-7
  • Asus RS500-E8-PS4 V2 | User Guide - Page 136
    8. Select Units from the Virtual Drive sub-menu, and then press . 9. Select the units for virtual drive size from the menu, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured ManagemeLnDt
  • Asus RS500-E8-PS4 V2 | User Guide - Page 137
    #Stripes StripSz Status 0 1 148.580GB 2 64KB ONLINE Select Yes Or No Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option ASUS RS500-E8 V2 Series 6-9
  • Asus RS500-E8-PS4 V2 | User Guide - Page 138
    Using New Configuration When a RAID set already exists, using the New Configuration command erases the existing RAID configuration data. If you do not want to delete the existing RAID set, use the View/Add Configuration command to view or create another RAID configuration. To create a RAID set
  • Asus RS500-E8-PS4 V2 | User Guide - Page 139
    drive displays at the bottom of the screen. 3. Follow step 3 to 12 of section 6.2.1 Creating a RAID set: Using Easy Configuration to add a new RAID set. ASUS RS500-E8 V2 Series 6-11
  • Asus RS500-E8-PS4 V2 | User Guide - Page 140
    6.2.3 Initializing the virtual drives After creating the RAID set(s), you must initialize the virtual drives. You may initialize the virtual drives of a RAID set(s) using the Initialize or Objects command on the Management Menu. Using the Initialize command To initialize the virtual drive using the
  • Asus RS500-E8-PS4 V2 | User Guide - Page 141
    StripSz 0 In1it of 1V4D8.I5s80IGnB Proces2s 64KB VD 0 Initialization Complete. Press Esc.. 100% Completed Status ONLINE Virtual Drives Virtual Drive 0 SPACE-(De)Select, F10-Initialize ASUS RS500-E8 V2 Series 6-13
  • Asus RS500-E8-PS4 V2 | User Guide - Page 142
    Using the Objects command To initialize the virtual drives using the Objects command 1. From the Management Menu, select Objects > Virtual Drive, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Objects Management MAednaupter
  • Asus RS500-E8-PS4 V2 | User Guide - Page 143
    And Press Enter To Select An Option 6. A progress bar appears on screen. If desired, press to abort initialization. When initialization is completed, press . ASUS RS500-E8 V2 Series 6-15
  • Asus RS500-E8-PS4 V2 | User Guide - Page 144
    6.2.4 Rebuilding failed drives You can manually rebuild failed hard disk drives using the Rebuild command in the Management Menu. To rebuild a failed hard disk drive 1. From the Management Menu, select Rebuild,
  • Asus RS500-E8-PS4 V2 | User Guide - Page 145
    77247MB HDS72808PLA380 PF20A60A SPACE-(De)Select,F10-Start Rebuild,F2-Drive Information,F3-View Virtual Drives 4. When rebuild is complete, press any key to continue. ASUS RS500-E8 V2 Series 6-17
  • Asus RS500-E8-PS4 V2 | User Guide - Page 146
    6.2.5 Checking the drives for data consistency You can check and verify the accuracy of data redundancy in the selected virtual drive. The utility can automatically detect and/or detect and correct any differences in data redundancy depending on the selected option in the Objects > Adapter menu. The
  • Asus RS500-E8-PS4 V2 | User Guide - Page 147
    consistency check. • Abort - Aborts the consistency check. When you restart checking, it continues from zero percent. 5. When checking is complete, press any key to continue. ASUS RS500-E8 V2 Series 6-19
  • Asus RS500-E8-PS4 V2 | User Guide - Page 148
    Using the Objects command To check data consistency using the Objects command 1. From the Management Menu, select Objects, and then select Virtual Drive from the sub-menu. 2. Use the arrow keys to select the virtual drive you want to check, and then press . 3. Select Check Consistency from
  • Asus RS500-E8-PS4 V2 | User Guide - Page 149
    Cursor Keys To Navigate Between Items And Press Enter To Select An Option The utility clears all the current array(s). 3. Press any key to continue. ASUS RS500-E8 V2 Series 6-21
  • Asus RS500-E8-PS4 V2 | User Guide - Page 150
    6.2.7 Selecting the boot drive from a RAID set You must have created a new RAID configuration before you can select the boot drive from a RAID set. See section 6.2.1 Creating a RAID set: Using New Configuration for details. To select the boot drive from a RAID set 1. From the Management Menu, select
  • Asus RS500-E8-PS4 V2 | User Guide - Page 151
    6.2.8 Enabling WriteCache You may manually enable the RAID controller's WriteCache option after creating a RAID set to improve the data transmission performance. When you Between Items And Press Enter To Select An Option 5. When finished, press any key to continue. ASUS RS500-E8 V2 Series 6-23
  • Asus RS500-E8-PS4 V2 | User Guide - Page 152
    to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. Before you proceed, ensure that you have installed the Serial ATA hard disk drives, have set the correct jumper settings of the
  • Asus RS500-E8-PS4 V2 | User Guide - Page 153
    the selection bar then press to select a disk. A small triangle before the Port number marks the selected drive. Press when you are done. ASUS RS500-E8 V2 Series 6-25
  • Asus RS500-E8-PS4 V2 | User Guide - Page 154
    6. Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0, 10 and 5 only) then press . The available stripe size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for
  • Asus RS500-E8-PS4 V2 | User Guide - Page 155
    VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) Are you sure you want to delete volume "Volume0"? (Y/N): ASUS RS500-E8 V2 Series 6-27
  • Asus RS500-E8-PS4 V2 | User Guide - Page 156
    6.3.3 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set: 1. From the utility main menu, select 3. Reset Disks to Non-RAID and press <
  • Asus RS500-E8-PS4 V2 | User Guide - Page 157
    Model Serial # Size X XXXXXXXXXXX XXXXXXXX XXX.GB [ ]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. ASUS RS500-E8 V2 Series 6-29
  • Asus RS500-E8-PS4 V2 | User Guide - Page 158
    3. The utility immediately starts rebuilding after the disk is selected. When done, the status of the degraded RAID volume is changed to "Rebuild". Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023 Copyright(C) 2003-12 Intel Corporation. All Rights Reserved. [ MAIN MENU ]
  • Asus RS500-E8-PS4 V2 | User Guide - Page 159
    Chapter 4 for more details. 4. From the Exit menu, select Save Changes & Exit, then press . 5. When the confirmation window appears, select Yes, then press . ASUS RS500-E8 V2 Series 6-31
  • Asus RS500-E8-PS4 V2 | User Guide - Page 160
    disk drives that are connected to the Serial ATA connectors supported by the Southbridge. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 6. To enter the Intel® Rapid Storage
  • Asus RS500-E8-PS4 V2 | User Guide - Page 161
    data on one of the selected disks, select NO when prompted. • If you want to Enable volume write-back cache or Initialize volume, click Advanced. ASUS RS500-E8 V2 Series 6-33
  • Asus RS500-E8-PS4 V2 | User Guide - Page 162
    6. Confirm the volume creation, than click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. 7. Wait until the process is completed, then click OK when prompted. You still need to
  • Asus RS500-E8-PS4 V2 | User Guide - Page 163
    RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. ASUS RS500-E8 V2 Series 6-35
  • Asus RS500-E8-PS4 V2 | User Guide - Page 164
    6.4.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives. Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: 1. From the utility main menu, select the volume (exp. Volume_0000) in Volumes
  • Asus RS500-E8-PS4 V2 | User Guide - Page 165
    , or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors ASUS RS500-E8 V2 Series 6-37
  • Asus RS500-E8-PS4 V2 | User Guide - Page 166
    6-38 Chapter 6: RAID Configuration
  • Asus RS500-E8-PS4 V2 | User Guide - Page 167
    Chapter 7: Driver Installation Driver Installation This chapter provides the instructions for installing the necessary drivers for different system components in both Linux® and Windows® Operating Systems. 7
  • Asus RS500-E8-PS4 V2 | User Guide - Page 168
    or bootable array. This part provides the instructions on how to install the RAID controller the SATA optical disk drive has to be manually adjusted. Otherwise, the system will not boot drive as the first boot priority to boot from the support DVD. Save your changes, and then exit the BIOS Setup
  • Asus RS500-E8-PS4 V2 | User Guide - Page 169
    floppy disk drive. 2. Type dd if=XXX.img of=/dev/fd0 to decompress the file into the floppy disk from the following path in the support DVD: For LSI MegaRAID Driver \Drivers\C60x LSI RAID\Driver\makedisk\Linux 3. Eject the floppy disk. ASUS RS500-E8 V2 Series 7-3
  • Asus RS500-E8-PS4 V2 | User Guide - Page 170
    when installing Windows® Server 2008 OS 1. Boot the computer using the Windows® Server 2008 OS installation disc. Follow the screen instructions to start installing Windows Server 2008. 2. When prompted to choose a type of installation, click Custom (advanced). 3. Click Load Driver. 7-4 Chapter
  • Asus RS500-E8-PS4 V2 | User Guide - Page 171
    When the system finishes loading the RAID driver, replace the motherboard Support DVD with the Windows Server installation disc. Select the drive to install Windows and click Next. 8. Setup then proceeds with the OS installation. Follow screen instructions to continue. ASUS RS500-E8 V2 Series 7-5
  • Asus RS500-E8-PS4 V2 | User Guide - Page 172
    Red Hat® Enterprise Linux OS 5.6 To install the LSI MegaRAID controller driver when installing Red Hat® Enterprise OS: 1. Boot the system from the Red Hat® OS installation CD. 2. At the boot:, type linux dd noprobe=ata1 noprobe=ata2..., then press . The number of ata varies with the hard
  • Asus RS500-E8-PS4 V2 | User Guide - Page 173
    More Driver Disks? Do you wish to load any more driver disks? Yes No 6. Follow the onscreen instructions to finish the OS installation. 7. When the installation is completed, DO NOT click Reboot. Press /fd0 /mnt/driver cd /mnt/driver sh replace_ahci.sh reboot ASUS RS500-E8 V2 Series 7-7
  • Asus RS500-E8-PS4 V2 | User Guide - Page 174
    Red Hat® Enterprise Linux OS 6.1 To install the LSI MegaRAID controller driver when installing Red Hat® Enterprise OS: 1. Boot the system from the Red Hat® OS installation CD. 2. Press to edit options. 3. While booting from DVD, press to give the third party driver. Enter the following
  • Asus RS500-E8-PS4 V2 | User Guide - Page 175
    Sou8rce You have multiple devices which could serve as source for a driver disk. Which would you like to use? sdc sdd sdb sr0 OK Cancel ASUS RS500-E8 V2 Series 7-9
  • Asus RS500-E8-PS4 V2 | User Guide - Page 176
    RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 8. Follow the onscreen instructions to finish the OS installation. 7-10 Chapter 7: Driver Installation
  • Asus RS500-E8-PS4 V2 | User Guide - Page 177
    -1-sles11ga-x86__64.img image 4. Copy the contents of the image directory, labeled as 01, into a FAT32 USB drive. 5. Rename the 01 folder to CD Image. ASUS RS500-E8 V2 Series 7-11
  • Asus RS500-E8-PS4 V2 | User Guide - Page 178
    Installing SUSE 11 Linux OS To install the LSI MegaRAID controller driver when installing SUSE Linux Enterprise Server OS: 1. Boot the system from the SUSE OS installation CD. 2. Use the arrow keys to select Installation from the Boot Options menu. 3. Press , then select Yes from the menu. Press
  • Asus RS500-E8-PS4 V2 | User Guide - Page 179
    medium. Select OK, then press . Please choose the Driver Update medium. sda: USB Floppy other device OK Back 6. Select Back and follow the onscreen instructions to finish the installation. ASUS RS500-E8 V2 Series 7-13
  • Asus RS500-E8-PS4 V2 | User Guide - Page 180
    .EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. The main screen of the Support DVD contains the following tabs: 1. Drivers 2. Utilities 3. MakeDisk 4. Manual 5. Contact The main screen of the Support DVD looks exactly the same on the Windows® Server 2008 R2 and on
  • Asus RS500-E8-PS4 V2 | User Guide - Page 181
    installed devices. Install the necessary drivers to activate the devices. 7.3.2 Utilities menu tab The Utilities menu displays the software applications and utilities that the motherboard supports. ASUS RS500-E8 V2 Series 7-15
  • Asus RS500-E8-PS4 V2 | User Guide - Page 182
    to create the Intel RAID driver disks. Press the arrow down button in the lower part of the menu to view more items. 7.3.4 Manual menu The Manual menu provides the link to the Broadcom NetXtreme II Network Adapter user guide. You need an internet browser installed in your OS to view the User
  • Asus RS500-E8-PS4 V2 | User Guide - Page 183
    7.3.5 Contact information menu The Contact menu displays the ASUS contact information, e-mail addresses, and useful links if you need more information or technical support for your motherboard. ASUS RS500-E8 V2 Series 7-17
  • Asus RS500-E8-PS4 V2 | User Guide - Page 184
    provides the instructions on how to install the Intel® chipset device software on the system. You need to manually install the Intel with Administrator privileges. 2. Insert the motherboard/system support DVD to the optical drive. The support DVD automatically displays the Drivers menu if Autorun
  • Asus RS500-E8-PS4 V2 | User Guide - Page 185
    5. Select Yes to accept the terms of the License Agreement and continue the process. 6. Read the Readme File Information and press Next to continue the installation. 7. Toggle Yes, I want to restart the computer now and click Finish to complete the setup process. ASUS RS500-E8 V2 Series 7-19
  • Asus RS500-E8-PS4 V2 | User Guide - Page 186
    /I350-AM2/I210 X540-BT2 Gigabit Adapters driver This section provides the instructions on how to install the Intel® I350-AM1/I350-AM2/ I210/ . 2. Log on with Administrator privileges. 3. Insert the motherboard/system support DVD to the optical drive. If Autorun is NOT enabled in your computer, browse
  • Asus RS500-E8-PS4 V2 | User Guide - Page 187
    . 8. From the Setup Options window, click Next to start the installation. By default, Intel(R) PROSet for Windows Device Manager and Windows PowerShell Module are ticked. ASUS RS500-E8 V2 Series 7-21
  • Asus RS500-E8-PS4 V2 | User Guide - Page 188
    9. Click Install to start the installation. 10. When the installation is done, press Finish to complete the installation. 7-22 Chapter 7: Driver Installation
  • Asus RS500-E8-PS4 V2 | User Guide - Page 189
    of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 3. Click the ASPEED AST2300 / AST2400 Display Driver to begin installation. 4. From the installation window, click Next to start the installation. ASUS RS500-E8 V2 Series
  • Asus RS500-E8-PS4 V2 | User Guide - Page 190
    5. Click Install to proceed with the installation. 6. Click Finish to complete the installation. 7-24 Chapter 7: Driver Installation
  • Asus RS500-E8-PS4 V2 | User Guide - Page 191
    . 2. Insert the motherboard/system support DVD to the optical drive, and find the utility menu. 3. Click the Intel® Rapid Storage Technology enterprise 4.0 to begin installation. 4. When the Welcome to the Setup Program appears, click Next to start the installation. ASUS RS500-E8 V2 Series 7-25
  • Asus RS500-E8-PS4 V2 | User Guide - Page 192
    5. Read the Warning message and click Next to continue. 6. Read the License Agreement and click Yes to continue. 7. Read the Readme File Information and click Next to continue. 7-26 Chapter 7: Driver Installation
  • Asus RS500-E8-PS4 V2 | User Guide - Page 193
    8. After completing the installation, click Next to complete the setup process. 9. Select Yes, I want to restart my computer now and click Finish to restart your computer before using the program. ASUS RS500-E8 V2 Series 7-27
  • Asus RS500-E8-PS4 V2 | User Guide - Page 194
    7-28 Chapter 7: Driver Installation
  • Asus RS500-E8-PS4 V2 | User Guide - Page 195
    Appendix Appendix
  • Asus RS500-E8-PS4 V2 | User Guide - Page 196
    11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail [email protected] Web site http://www.asus.com.tw Technical Support Telephone +886-2-2894-3447 (0800-093-456) Online Support http://support.asus.com/techserv/techserv.aspx ASUSTeK COMPUTER INC. (China) Address No.508
  • Asus RS500-E8-PS4 V2 | User Guide - Page 197
    Ostrava - Hrabová, Czech Republic Telephone +420-596766888 Web site http://www.asus.cz Technical Support Telephone Fax E-mail Online Support +420-596-766-891 +420-596-766-329 [email protected] http://support.asus.com/techserv/techserv.aspx ASUS RS500-E8 V2 Series A-3
  • Asus RS500-E8-PS4 V2 | User Guide - Page 198
    Sp. z o.o. (Poland) Address Ul. Postępu 6, 02-676 Warszawa, Poland Web site http://pl.asus.com Technical Support Telephone Online Support +48-225718033 http://support.asus.com/techserv/techserv.aspx ASK-Service (Russia and CIS) Address 10 Telephone (495) 640-32-75 Web site http://ru
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
1U Rackmount Server
User Guide
RS500-E8 V2 Series
RS500-E8-PS4 V2
RS500-E8-RS4 V2