Asus VivoMini UN62V vivominiUNseriesmemorywifissdinstallationguidev2 English
Asus VivoMini UN62V Manual
View all Asus VivoMini UN62V manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus VivoMini UN62V manual content summary:
- Asus VivoMini UN62V | vivominiUNseriesmemorywifissdinstallationguidev2 English - Page 1
E9955 Revised Edition V2 December 2014 VivoMini memory, wireless card, and solid state drive (SSD) installation guide Your VivoMini comes with the following items. Please contact ASUS Service Center if you cannot find the following items: • 4 pcs holed rubber foot • 3 pcs 3mm round screws, 1 - Asus VivoMini UN62V | vivominiUNseriesmemorywifissdinstallationguidev2 English - Page 2
3. Remove the four screws securing the cover. 4. Get one screw from the ones you previously removed then place it into the hole. Leave a portion of the screw head that would be enough for you to hold. 5. Hold the screw then gently pull out the cover from the bottom side of the VivoMini. Use - Asus VivoMini UN62V | vivominiUNseriesmemorywifissdinstallationguidev2 English - Page 3
6. Align and insert the memory module into the slot (A) and press it down (B) until it is securely seated in place. Repeat the same steps to install the other memory module. IMPORTANT! Always install into the lower slot first. 7. Remove the screw you previously attached on the bottom cover. 8. - Asus VivoMini UN62V | vivominiUNseriesmemorywifissdinstallationguidev2 English - Page 4
9. Reattach the screws to secure the cover back on the bottom side of the main box. 10. Place the rubber foot on each screw hole. Refer to the illustration for more details. IMPORTANT! A number is printed under each rubber foot and this number corresponds to that rubber foot's location on the - Asus VivoMini UN62V | vivominiUNseriesmemorywifissdinstallationguidev2 English - Page 5
adapters. To install or upgrade the wireless card: 1. Follow steps 1-5 on pages 1-2 under the Installing or upgrading memory modules section of this guide to remove the bottom cover of your VivoMini. 2. Align and insert the wireless card into the lower slot inside the VivoMini. Refer to the - Asus VivoMini UN62V | vivominiUNseriesmemorywifissdinstallationguidev2 English - Page 6
7-9 on pages 3-4 under the Installing or upgrading memory modules section of this guide to replace the bottom cover back on your VivoMini. Installing or upgrading the mSATA SSD Your VivoMini includes a PCIe slot that supports a full-size or a half-size mSATA SSD. To install or upgrade a full - Asus VivoMini UN62V | vivominiUNseriesmemorywifissdinstallationguidev2 English - Page 7
the illustration for the location of the screw hole. 4. Follow steps 7-9 on pages 3-4 under the Installing or upgrading memory modules section of this guide to replace the bottom cover back on your VivoMini. To install or upgrade a half-size mSATA SSD: 1. Follow steps 1-5 on pages 1-2 under - Asus VivoMini UN62V | vivominiUNseriesmemorywifissdinstallationguidev2 English - Page 8
. Refer to the illustration for the location of the screw hole. 5. Follow steps 7-9 on pages 3-4 under the Installing or upgrading memory modules section of this guide to replace the bottom cover back on your VivoMini. 8
E9955
Revised Edition V2
December 2014
VivoMini memory, wireless card, and
solid state drive (SSD) installation guide
Your VivoMini comes with two SO-DIMM memory slots that allow you to install two 2GB, 4GB, or
8GB unbuffered with non-ECC 1.35 V DDR3 204-pin SO-DIMMs for a maximum of 16GB memory.
IMPORTANT!
Refer to http://www.asus.com for the list of compatible DIMMs. You can only
install 1.35 V DDR3 SO-DIMM to the VivoMini’s DIMM slots.
IMPORTANT!
•
It is recommended that you install or upgrade the memory modules, wireless card, and
solid state drive (SSD), under professional supervision. Visit an ASUS service center for
further assistance.
•
Ensure that your hands are dry before proceeding with the rest of the installation
process. Before installing any of the features in this guide, use a grounded wrist strap or
touch a safely grounded object or metal object to avoid damaging them due to static
electricity.
Installing or upgrading memory modules
To install or upgrade the memory modules:
1.
Turn off your VivoMini then disconnect all cables and peripherals.
2.
Place the VivoMini on a flat stable surface, with its top side facing down.
Your VivoMini comes with the following items. Please contact ASUS Service Center if you cannot
find the following items:
•
4 pcs holed rubber foot
•
3 pcs 3mm round screws, 1 hexagon screw
1
15060-47900100