Asus X99-PRO USB 3.1 User Guide

Asus X99-PRO USB 3.1 Manual

Get Asus X99-PRO USB 3.1 PDF manuals and user guides View all Asus X99-PRO USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus X99-PRO USB 3.1 manual content summary:

  • Asus X99-PRO USB 3.1 | User Guide - Page 1
    Motherboard X99-PRO/ USB 3.1
  • Asus X99-PRO USB 3.1 | User Guide - Page 2
    ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL from http://support.asus.com/download code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code
  • Asus X99-PRO USB 3.1 | User Guide - Page 3
    About this guide...vi X99-PRO/USB 3.1 specifications summary viii Package contents...xiv Installation tools and components xv Chapter 1: Product Introduction 1.1 Special features 1-1 1.1.1 Product highlights 1-1 1.1.2 Other special features 1-2 1.2 Motherboard overview 1-3 1.2.1 Before
  • Asus X99-PRO USB 3.1 | User Guide - Page 4
    3-57 3.9.1 ASUS EZ Flash 2 Utility 3-57 3.9.2 ASUS O.C. Profile 3-58 3.9.3 ASUS DRAM SPD Information 3-59 3.10 Exit menu 3-60 3.11 Updating BIOS 3-61 3.11.1 EZ Update 3-61 3.11.2 ASUS EZ Flash 2 3-61 3.11.3 ASUS CrashFree BIOS 3 3-63 Appendices Notices A-1 ASUS contact information
  • Asus X99-PRO USB 3.1 | User Guide - Page 5
    Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with . • If you encounter technical problems with the product, contact a qualified service technician or your retailer. v
  • Asus X99-PRO USB 3.1 | User Guide - Page 6
    you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: 1. Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches
  • Asus X99-PRO USB 3.1 | User Guide - Page 7
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus X99-PRO USB 3.1 | User Guide - Page 8
    X99-PRO/USB 3.1 specifications summary CPU Chipset Memory Expansion slots Multi-GPU support Storage LGA2011-v3 socket for the New Intel® Core™ i7 processors Supports 22nm CPU Supports Intel® Turbo Boost Technology 2.0* * The Intel® Turbo Boost Technology 2.0 support depends on the CPU types. Intel
  • Asus X99-PRO USB 3.1 | User Guide - Page 9
    X99-PRO/USB 3.1 specifications summary Storage Wi-Fi Bluetooth LAN Audio USB * Type 2230 storage device is only available on ASUS HYPER M.2x 4 card ** 1 at onboard, 1 at bundled add-on card (ASUS HYPER M.2x4 card) *** Due to chipset behavior, the SATA6G_78 and SATA6G_910 ports (black) do not
  • Asus X99-PRO USB 3.1 | User Guide - Page 10
    X99-PRO/USB 3.1 specifications summary ASUS Exclusive Features Flagship Performance 5-Way Optimization by Dual signal reflection effect Thunderbolt Ready (optional) - Blistering-fast 20 Gb/s data transfer upgrades with ThunderboltEX II series Powerful Home Server ASUS HomeCloud Server Wi-
  • Asus X99-PRO USB 3.1 | User Guide - Page 11
    in real time USB BIOS Flashback - with USB BIOS Flashback Wizard for EZ BIOS download scheduling UEFI BIOS EZ Mode - featuring friendly graphics user interface - ASUS O.C. Tuner - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2 Q-Design - ASUS Q-Code - ASUS Q-Shield - ASUS Q-LED (CPU, DRAM, VGA, Boot
  • Asus X99-PRO USB 3.1 | User Guide - Page 12
    (bottom port supports USB BIOS Flashback) 1 x Keyboard/Mouse combo connector 8-channel Audio I/O ports 1 x ASUS Wi-Fi GO! module (Wi-Fi 802.11 a/b/g/n/ac and Bluetooth v4.0) 2 x 19-pin USB 3.0/2.0 connectors, support additional 4 USB ports 2 x USB 2.0/1.1 connectors, support additional 4 USB ports
  • Asus X99-PRO USB 3.1 | User Guide - Page 13
    X99-PRO/USB 3.1 specifications summary Internal I/O Connectors BIOS Features Manageability Support DVD Operating system Form Factors 1 x 4-pin CPU Fan connector for both 3-pin (DC mode) and 4-pin (PWM mode) CPU coolers control with auto detection 1 x 4-pin CPU OPT Fan connector 4 x 4-pin Chassis
  • Asus X99-PRO USB 3.1 | User Guide - Page 14
    Package contents Check your motherboard package for the following items ASUS X99-PRO/USB 3.1 motherboard 6 x Serial ATA 6 Gb/s cables 1 x ASUS Q-Shield 1 x ASUS SLI™ bridge connector HYPER M.2 x 4 Support DVD User Manual 1 x ASUS 2T2R dual-band Wi-Fi moving antennas (Wi-Fi 802.11a/b/g/n/ac
  • Asus X99-PRO USB 3.1 | User Guide - Page 15
    ® LGA2011-v3 CPU Intel® LGA2011-v3 compatible CPU Fan PC chassis SATA hard disk drive Philips (cross) screwdriver Power supply unit 1 bag of screws DIMM SATA optical disc drive (optional) Graphics card The tools and components in the table above are not included in the motherboard package
  • Asus X99-PRO USB 3.1 | User Guide - Page 16
    xvi
  • Asus X99-PRO USB 3.1 | User Guide - Page 17
    motherboard features the M.2 slot, which shares bandwidth with PCI Express 3.0 x4 slot to speed up data transfer up to 32 Gb/s. This helps enhance the performance of your SSD (Solid State Drive) that is dedicated only to the operating system. * Supports PCIe mode only. Chapter 1 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 18
    USB 3.1 integration This motherboard has the latest USB 3.1 connectivity built in with dual Type-A ports for the very fastest USB data transfers - that's up to 10 Gb/s, or twice as fast as USB 3.0. The next-generation standard is completely backward-compatible with your existing USB with ASUS vision
  • Asus X99-PRO USB 3.1 | User Guide - Page 19
    came with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Chapter 1 ASUS X99-PRO/USB 3.1 1-3
  • Asus X99-PRO USB 3.1 | User Guide - Page 20
    1.2.2 Motherboard layout Chapter 1 Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. 1-4 Chapter 1: Product introduction
  • Asus X99-PRO USB 3.1 | User Guide - Page 21
    LGA2011-v3 CPU socket 4. ATX TPM) 19. Q-Code LEDs 20. Reset CPU Over Voltage jumper (3-pin CPU_OV) 26. Thunderbolt header (5-pin TB_HEADER) Page 1-7 1-36 1-6 1-37 1-20 1-32 1-34 1-22 1-33 1-21 1-40 1-41 1-38 1-39 1-35 1-20 1-24 1-39 1-28 1-19 1-19 1-41 1-42 1-33 1-25 1-40 Chapter 1 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 22
    . ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA2011-v3 socket. • The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal
  • Asus X99-PRO USB 3.1 | User Guide - Page 23
    motherboard comes with eight DDR 4 (Double Data Rate 4) Quad Inline Memory Modules (DIMM) slots. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Recommended memory configurations Chapter 1 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 24
    CPU spec, DIMM voltage below 1.65 V is recommended to protect the CPU. • Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB or more memory on the motherboard manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support
  • Asus X99-PRO USB 3.1 | User Guide - Page 25
    X99-PRO/USB 3.1 Motherboard Qualified Vendors Lists (QVL) DDR4 3333 (O.C.) MHz capability Vendors Part No. G.SKILL A_DATA F4-3333C16Q-16GRK AX4U3333W4G16 Size SS/ Chip Chip NO. Timing Voltage DIMM socket DS Brand support 15-17-17-35 1.35V • • Chapter 1 ASUS X99-PRO/USB 3.1 1-9
  • Asus X99-PRO USB 3.1 | User Guide - Page 26
    SS DS DS SS DS SS DS DS SS DS SS Samsung SS SS SS DS DS DS SS - Chip NO. Timing Voltage DIMM socket support (Optional) 2 4 8 H5AN4G8NMFR 17-18-18-36 1.2V • • H5AN4G8NMFR 17-17-17-36 1.2V • • H5AN4G8NMFR 17-17-17-36 1.2V • • • H5AN4G8NMFR 17-17-17-36 1.2V
  • Asus X99-PRO USB 3.1 | User Guide - Page 27
    MHz capability Vendors Part No. Size SS/ Chip Chip NO. Timing Voltage DIMM socket DS Brand support (Optional) 248 CORSAIR CMD16GX4M4A2666C14 16GB(4GB*4) SS - - 14-16-16-35 1.2V • • • • • ISDT IMA451U6MFR8N-CF0 4GB SS - - 15-15-15-35 1.2V • • • Chapter 1 ASUS X99-PRO/USB 3.1 1-11
  • Asus X99-PRO USB 3.1 | User Guide - Page 28
    4GB panram PUD42400C158GNJK 8GB panram PUD42400C154G2NJK 8GB(4GB*2) panram PUD42400C158G2NJK 16GB(8GB*2) SS/ Chip DS Brand Chip NO. Timing Voltage DIMM socket support (Optional) 248 SS SK hynix H5AN4G8NMFR 16-16-16-39 1.2V • • SS SK hynix H5AN4G8NMFR 16-16-16-36 1.2V • • • SS SK
  • Asus X99-PRO USB 3.1 | User Guide - Page 29
    H5AN4G8NMFR H5AN4G8NMFR H5AN4G8NMFR H5AN4G8NMFR H5AN4G8NMFRTFC H5AN4G8NMFR H5AN4G8NMFR H5AN4G8NMFRTFC H5AN4G8NMFRTFC - Timing Voltage DIMM socket support (Optional) 2 4 8 15-15- 1.2V • • • 15-37 • 15-35 15-15- 1.2V • • 15-35 15-15- 1.2V • • 15-35 Chapter 1 ASUS X99-PRO/USB 3.1 1-13
  • Asus X99-PRO USB 3.1 | User Guide - Page 30
    DS Micron 4GB SS SK hynix Chip NO. - H5AN4G8NMFRTFC H5AN4G8NMFRTFC Z9RGR Z9RGR I5AN4G8NMFR I5AN4G8NMFR D9RGQ D9RGQ D9RGQ H5AN4G8NMFRTFC Timing Voltage DIMM socket support (Optional) 2 4 8 15-15- 1.2V • • 15-35 15-15- 1.2V • • 15-35 15-15- 1.2V • • • 15-35 15-15- 1.2V • • 15-35
  • Asus X99-PRO USB 3.1 | User Guide - Page 31
    . • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. Chapter 1 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 32
    slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 1 Slot No. 1 2 3 4 5 6 40-LANE PCIe 3.0/2.0 x16_1 slot PCIe 2.0 x1_1 slot PCIe 2.0 x16_2 slot PCIe 3.0/2.0 x16_3 slot PCIe 2.0 x1_2 slot
  • Asus X99-PRO USB 3.1 | User Guide - Page 33
    cards x16 x8 x4* • *The 3-Way SLI™ configuration is not supported when using a 28-LANE CPU. • *When the M.2 x4 slot is occupied, the PCIe x16_4 to the motherboard connector labeled CHA_FAN1-4 when using multiple graphics cards for better thermal environment. Chapter 1 ASUS X99-PRO/USB 3.1 1-17
  • Asus X99-PRO USB 3.1 | User Guide - Page 34
    IRQ assignments for this motherboard A B C D E F G H PCIe x16_1 shared - - - - - - - PCIe SMBUS Controller - - shared - - - - - Wi-Fi/Bluetooth 4.0 - - - shared - - - - Intel® SATA mode by default. When the bandwidth is manually switched to x4 mode, the IRQ assignment
  • Asus X99-PRO USB 3.1 | User Guide - Page 35
    gamers who continually change settings to enhance system performance. 1. Power-on button The motherboard comes with a power-on button that allows you to power up or wake up any motherboard component. 2. Reset button Press the reset button to reboot the system. Chapter 1 ASUS X99-PRO/USB 3.1 1-19
  • Asus X99-PRO USB 3.1 | User Guide - Page 36
    the motherboard may Vendors Lists) in this user manual or at www.asus.com. • If you turn BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from www.asus
  • Asus X99-PRO USB 3.1 | User Guide - Page 37
    CPU Ratio Boost), the system automatically adjusts the CPU ratio for an enhanced performance. • When the TPU switch is set to Enabled (TPU_II: CPU BCLK the BIOS setup program or enable the TPU switch at the same time. However, the system will use the last setting you have made. ASUS X99-PRO/USB 3.1
  • Asus X99-PRO USB 3.1 | User Guide - Page 38
    Windows® OS environment, the EPU function will be activated after the next system bootup. • You may change the EPU settings in the software application or BIOS setup program and enable the EPU function at the same time. However, the system will use the last setting you have made. Chapter 1 1-22
  • Asus X99-PRO USB 3.1 | User Guide - Page 39
    LED (XLED1) lights up when you enable the EZ XMP switch. For the location of the EZ XMP LED, refer to section 1.2.8 Onboard LEDs. Chapter 1 ASUS X99-PRO/USB 3.1 1-23
  • Asus X99-PRO USB 3.1 | User Guide - Page 40
    the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values. • Due to the chipset behavior, AC power off is required
  • Asus X99-PRO USB 3.1 | User Guide - Page 41
    allows you to set a higher CPU voltage for a flexible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage setting, insert the jumper to pins 1-2. Chapter 1 ASUS X99-PRO/USB 3.1 1-25
  • Asus X99-PRO USB 3.1 | User Guide - Page 42
    State LEDs provide the status of these key components during POST (Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component's LED stays lit up until the problem is solved. 2. TPU LED (TPU_LED) The TPU LED lights up when the TPU switch
  • Asus X99-PRO USB 3.1 | User Guide - Page 43
    3. EPU LED (O2LED3) The EPU LED lights up when the EPU switch is enabled. 4. EZ XMP LED (XLED1) This LED lights up when you enable the EZ XMP switch. Chapter 1 ASUS X99-PRO/USB 3.1 1-27
  • Asus X99-PRO USB 3.1 | User Guide - Page 44
    design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the next page for details. Q-Code table Code 00 02 03 04 06 10 11 - 14 for ASL (see ASL Status Codes section below) Memory Installed CPU post-memory initialization Post-Memory System
  • Asus X99-PRO USB 3.1 | User Guide - Page 45
    ) ACPI module initialization CSM initialization Reserved for future AMI DXE codes Boot Device Selection (BDS) phase is started Driver connecting is started PCI Bus initialization is started PCI Bus Hot Plug Controller Initialization (continued on the next page) Chapter 1 ASUS X99-PRO/USB 3.1 1-29
  • Asus X99-PRO USB 3.1 | User Guide - Page 46
    Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset USB hot plug PCI bus hot plug Clean-up of NVRAM Configuration Reset (reset of NVRAM settings) Reserved for future AMI codes CPU initialization error System
  • Asus X99-PRO USB 3.1 | User Guide - Page 47
    password Error loading Boot Option (LoadImage returned error) Boot Option is failed (StartImage returned error) Flash update is failed Reset protocol is not available ACPI/ASL Checkpoints (under OS) Code 03 ACPI mode. Interrupt controller is in APIC mode. Chapter 1 ASUS X99-PRO/USB 3.1 1-31
  • Asus X99-PRO USB 3.1 | User Guide - Page 48
    Technology through the onboard Intel® X99 chipset. Chapter 1 • These connectors BIOS to [RAID Mode]. Refer to section 3.6.3 PCH Storage Configuration for details. • Before creating a RAID set, refer to the manual bundled in the motherboard support DVD. • The SATAEXPRESS_1 connector can support
  • Asus X99-PRO USB 3.1 | User Guide - Page 49
    back of the system chassis. The S/PDIF module is purchased separately. 3. M.2 socket 3 This socket allows you to install an M.2 (NGFF) SSD module. Chapter 1 This socket supports M Key and type 2242/2260/2280/22110 storage devices. ASUS X99-PRO/USB 3.1 1-33
  • Asus X99-PRO USB 3.1 | User Guide - Page 50
    is purchased separately. • Ensure to install the related driver to fully use the USB 3.0 ports under Windows® 7. • The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the operating system's setting. • These USB 3.0 ports support native UASP transfer standard in Windows® 8 / Windows
  • Asus X99-PRO USB 3.1 | User Guide - Page 51
    damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased separately. ASUS X99-PRO/USB 3.1 1-35 Chapter
  • Asus X99-PRO USB 3.1 | User Guide - Page 52
    1A (12 W) fan power. • The CPU_FAN, CHA_FAN, and EXT_FAN connectors support the ASUS FAN Xpert 3 feature on X99 platform. • The EXT_FAN connector supports 2 of 5 thermal sensor sources. • The CPU fan connector detects the type of CPU fan installed and automatically switches the control modes. To
  • Asus X99-PRO USB 3.1 | User Guide - Page 53
    system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W. Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. ASUS X99-PRO/USB 3.1 1-37 Chapter
  • Asus X99-PRO USB 3.1 | User Guide - Page 54
    panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. • System power LED -mounted system warning speaker. The speaker allows you to hear system beeps and warnings. • ATX power button/soft-off button (2-pin PWRSW) This connector is for the system power button
  • Asus X99-PRO USB 3.1 | User Guide - Page 55
    cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the extra button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details. ASUS X99-PRO/USB 3.1 1-39 Chapter
  • Asus X99-PRO USB 3.1 | User Guide - Page 56
    is for the add-on Thunderbolt I/O card that supports Intel's Thunderbolt Technology, allowing you to connect up to six Thunderbolt-enabled devices and a DisplayPort-enabled display in a daisy-chain configuration. The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately. 12
  • Asus X99-PRO USB 3.1 | User Guide - Page 57
    "Ground" are shorted with a jumper cap. Remove the jumper caps and enable the related options in BIOS if you intend to use the chassis intrusion detection feature. A message appears when you connect the sensor or slot opening at the back of the system chassis. Chapter 1 ASUS X99-PRO/USB 3.1 1-41
  • Asus X99-PRO USB 3.1 | User Guide - Page 58
    connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • If you want to connect a high-
  • Asus X99-PRO USB 3.1 | User Guide - Page 59
    The motherboard layout may vary with models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 60
    3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. 2-2 Chapter 2: Basic installation
  • Asus X99-PRO USB 3.1 | User Guide - Page 61
    . Follow the instructions printed on the metal sealing hatch or the illustrations shown below in this manual. The plastic cap will pop up automatically once the CPU is in place and the hatch properly sealed down. C A B A B Triangle mark B A Triangle mark Chapter 2 ASUS X99-PRO/USB 3.1 2-3
  • Asus X99-PRO USB 3.1 | User Guide - Page 62
    A B A B C 2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. Chapter 2 2-4 Chapter 2: Basic installation
  • Asus X99-PRO USB 3.1 | User Guide - Page 63
    To install the CPU heatsink and fan assembly Chapter 2 ASUS X99-PRO/USB 3.1 2-5
  • Asus X99-PRO USB 3.1 | User Guide - Page 64
    2.1.4 DIMM installation Chapter 2 To remove a DIMM 2-6 Chapter 2: Basic installation
  • Asus X99-PRO USB 3.1 | User Guide - Page 65
    2.1.5 ATX Power connection OR OR ASUS X99-PRO/USB 3.1 2-7 Chapter 2
  • Asus X99-PRO USB 3.1 | User Guide - Page 66
    2.1.6 SATA device connection OR OR Chapter 2 2-8 Chapter 2: Basic installation
  • Asus X99-PRO USB 3.1 | User Guide - Page 67
    2.1.7 Front I/O Connector To install ASUS Q-Connector HDD LED HDD LED+ HDD LED- HDD LED PWR Ground Reset Ground POWER SW RESET SW To install USB 2.0 connector To install front panel audio connector Chapter 2 USB 2.0 To install USB 3.0 connector USB 3.0 ASUS X99-PRO/USB 3.1 AAFP 2-9
  • Asus X99-PRO USB 3.1 | User Guide - Page 68
    2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2 2-10 Chapter 2: Basic installation
  • Asus X99-PRO USB 3.1 | User Guide - Page 69
    To install HYPER M.2 x4 card Chapter 2 For a higher performance, do not install the HYPER M.2 X4 is when using a 28-LANE CPU. The HYPER M.2 X 4 card and SSD card are purchased separately. ASUS X99-PRO/USB 3.1 2-11
  • Asus X99-PRO USB 3.1 | User Guide - Page 70
    .0 S/PDIF USB BIOS Flashback USB3.1 2.1.9 Wi-Fi antenna installation Installing the ASUS 2T2R dual band W-Fi antenna Connect the bundled ASUS 2T2R dual that the ASUS 2T2R dual band Wi-Fi antenna is securely installed to the Wi-Fi ports. • Ensure to install the Bluetooth driver before installing
  • Asus X99-PRO USB 3.1 | User Guide - Page 71
    /file format error. If this scenario happens, please restart the system to turn off the light. • Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system's failure to boot up, please contact your local ASUS Service Center. ASUS X99-PRO/USB 3.1 2-13
  • Asus X99-PRO USB 3.1 | User Guide - Page 72
    port** 3. USB BIOS Flashback 4. USB 2.0 ports 78 (Supports USB 3.0 Boost) 5. USB 2.0 ports 910 6. USB 3.1 ports E56 (Support USB 3.1 Boost) 7. USB 3.0 ports E34 (Supports USB 3.0 Boost) 8. USB 3.0 ports E2_5 (bottom port supports USB BIOS Flashback) 9. Wi-Fi 802.11 a/b/g/n/ac, Bluetooth V4.0* 10
  • Asus X99-PRO USB 3.1 | User Guide - Page 73
    Orange (Blinking Ready to wake up then steady) from S5 mode ACT/LINK SPEED LED LED LAN port You can disable the LAN controllers in BIOS. Due to hardware design, the LAN1 port's LEDs may continue to blink even when disabled. Chapter 2 ASUS X99-PRO/USB 3.1 2-15
  • Asus X99-PRO USB 3.1 | User Guide - Page 74
    *** Audio 2, 4, 6, or 8-channel configuration Port Light Blue Lime Pink Orange Black Headset 2-channel Line In Line Out Mic In - - 4-channel Line In Front Speaker Out Mic In - Rear Speaker Out 6-channel Line In Front Speaker Out Mic In Center/Subwoofer Rear Speaker Out 8-channel Side Speaker
  • Asus X99-PRO USB 3.1 | User Guide - Page 75
    Connect to 2.1 channel Speakers Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Chapter 2 If you are using Windows® 8.1 platform, use only the gray audio port for Side Speaker Out in a 6-channel configuration. ASUS X99-PRO/USB 3.1 2-17
  • Asus X99-PRO USB 3.1 | User Guide - Page 76
    panel case lights up. For systems with ATX power supplies, the system LED lights up when you press the ATX power button. If your monitor complies with self tests (POST). While the tests are running, the BIOS beeps (refer to the BIOS beep codes table) or additional messages appear on the screen. If
  • Asus X99-PRO USB 3.1 | User Guide - Page 77
    on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.5 Turning off the computer While the BIOS setting. Press the power switch for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. Chapter 2 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 78
    Chapter 2 2-20 Chapter 2: Basic installation
  • Asus X99-PRO USB 3.1 | User Guide - Page 79
    or update. Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. When downloading or updating the BIOS file, rename it as X99PU31.CAP for this motherboard. ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 80
    the CMOS and reset the motherboard to the default value. See section 1.2.6 Onboard buttons and switches for information on how to erase the RTC RAM via the Clear CMOS button. • The BIOS setup program does not support the Bluetooth devices. BIOS menu screen The BIOS Setup program can be used under
  • Asus X99-PRO USB 3.1 | User Guide - Page 81
    to manually tune the fans Shows the bootable devices Loads optimized default settings Saves the changes and resets the system Displays the Advanced mode menus Selects the boot device priority The boot device options vary depending on the devices you installed to the system. ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 82
    Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer modified settings Goes back to EZ Mode Displays the CPU/motherboard temperature, CPU and memory voltage output 3-4 Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 83
    ) This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard's SATA mode from AHCI to RAID mode. Refer to section 3.2.4 EZ Tuning Wizard for more information. Chapter 3 ASUS X99-PRO/USB 3.1 3-5
  • Asus X99-PRO USB 3.1 | User Guide - Page 84
    Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • You can only use the alphanumeric characters to enter your notes. Hot keys
  • Asus X99-PRO USB 3.1 | User Guide - Page 85
    3.2.3 QFan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans. Click to select a fan to be configured Click to the changes Click to go back to main menu Select to manually configure your fans ASUS X99-PRO/USB 3.1 3-7
  • Asus X99-PRO USB 3.1 | User Guide - Page 86
    configure your fans' operating speed. Speed points Click or tap to manually configure your fans To configure your fans: 1. Select the fan that you want to configure and the fans' operating speed. 3. Click Apply to save the changes then click Exit (ESC). 3-8 Chapter 3: BIOS setup Chapter 3
  • Asus X99-PRO USB 3.1 | User Guide - Page 87
    the CPU fan type (Box cooler, Tower cooler, or Water cooler) that you installed then click Next. If you are not sure of the CPU fan type, click I'm not sure. The system automatically detects the CPU fan type. 4. Click Next then click Yes to confirm auto-tuning. ASUS X99-PRO/USB 3.1 3-9 Chapter
  • Asus X99-PRO USB 3.1 | User Guide - Page 88
    Creating RAID To create RAID: 1. Press on your keyboard or click EZ Tuning Wizard screen. 2. Click RAID then click Next. from the BIOS screen to open • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel® SATA connectors. 3. Select the type of
  • Asus X99-PRO USB 3.1 | User Guide - Page 89
    3.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 ASUS X99-PRO/USB 3.1 3-11
  • Asus X99-PRO USB 3.1 | User Guide - Page 90
    items: 1. Press on your keyboard or click Setup Tree Map screen. from the BIOS screen to open 2. On the Setup Tree Map screen, select the BIOS items that you want to save in MyFavorites screen. Main menu panel Submenu panel Selected shortcut items 3. Select an item from main menu panel
  • Asus X99-PRO USB 3.1 | User Guide - Page 91
    system security settings. • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.2.6 Onboard buttons and switches for information ]. After you set a password, these items show [Installed]. ASUS X99-PRO/USB 3.1 3-13 Chapter 3
  • Asus X99-PRO USB 3.1 | User Guide - Page 92
    able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password key in the current password, then press . 3. From the Create New Password box, key in a new password, then press . 4. Confirm the password when prompted. To
  • Asus X99-PRO USB 3.1 | User Guide - Page 93
    Ai Overclocking Tuner to [Manual]. CPU Strap [Auto] This item allows you to select a strap close to your target BCLK (base clock) for an extreme overclocking, or leave it at [Auto] for the BIOS to upgrade. Configuration options: [Auto] [100MHz] [125MHz] [166MHz] [250MHz] ASUS X99-PRO/USB 3.1 3-15
  • Asus X99-PRO USB 3.1 | User Guide - Page 94
    clock based on the assigned CPU strap for a better ASUS MultiCore Enhancement [Auto] [Auto] This item allows you to maximize the oveclocking performance optimized by ASUS CPU Core Ratio to [Per Core]. 1-Core Ratio Limit [Auto] Select [Auto] to apply the CPU default Turbo Ratio setting or manually
  • Asus X99-PRO USB 3.1 | User Guide - Page 95
    CPU default Turbo Ratio setting or manually assign CPU installed. Max. CPU Cache Ratio [Auto] This item allows you to set the maximum possible ratio on the Uncore part of the processor. Use the or keys to adjust the value. The values depend on the CPU installed. Chapter 3 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 96
    EPU Power Saving Mode [Disabled] The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the unstable! If this happens, revert to the default settings. Chapter 3 3-18 Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 97
    Delay(tWTR_L) [Auto] Configuration options: [Auto] [1] - [15] DRAM CKE Minimum Pulse Width [Auto] Configuration options: [Auto] [4] - [8] DRAM Write Latency [Auto] Configuration options: [Auto] [1] - [31] Chapter 3 ASUS X99-PRO/USB 3.1 3-19
  • Asus X99-PRO USB 3.1 | User Guide - Page 98
    : [Auto] [1] - [3] RTL IOL control DRAM RTL INIT Value [Auto] Configuration options: [Auto] [1] - [127] DRAM RTL (CHA D0 R0) [Auto] Configuration options: [Auto] [1] - [127] 3-20 Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 99
    ] Configuration options: [Auto] [1] - [255] DRAM IO-L (CHB D0 R1) [Auto] Configuration options: [Auto] [1] - [255] DRAM IO-L (CHB D1 R0) [Auto] Configuration options: [Auto] [1] - [255] Chapter 3 ASUS X99-PRO/USB 3.1 3-21
  • Asus X99-PRO USB 3.1 | User Guide - Page 100
    (CHAB) [Auto] Configuration options: [Auto] [0.00] - [0.20] CTL Vref (CHCD) Sign [+] Configuration options: [+] [-] CTL Vref (CHCD) [Auto] Configuration options: [Auto] [0.00] - [0.20] Chapter 3 3-22 Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 101
    options: [Auto] [1.00] - [1.60] Transmitter ODT Pre-emphasis [Auto] Configuration options: [Auto] [1.00] - [1.60] Transmitter ODT De-emphasis [Auto] Configuration options: [Auto] [1.00] - [1.60] Chapter 3 ASUS X99-PRO/USB 3.1 3-23
  • Asus X99-PRO USB 3.1 | User Guide - Page 102
    the portion of the memory reference code to be skipped when possible to allows the portion of the memory reference code to be skipped when possible to CPU Input Boot Voltage [Auto] This item allows you to set a higher CPU CPU and VRM thermal conditions. Select from levels 1 to 9 to adjust the CPU
  • Asus X99-PRO USB 3.1 | User Guide - Page 103
    ]\ CPU Power Duty Control [T.Probe] DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal conditions of every phase component. [T. Probe] Select to maintain the VRM thermal balance. [Extreme] Select to maintain the current VRM balance. Chapter 3 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 104
    keys to adjust the value. The values depend on the CPU installed. DO NOT remove the thermal module. The thermal conditions should overclocking range and system stability. Set this item to [Manual] to manually set a fixed DRAM switching frequency for an increased overclocking Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 105
    a high voltage for overclocking. Configuration options: [Disabled] [Enabled] You can only enable this item if you enable the CPU OverVoltage jumper on your motherboard. Refer to section 1.2.2 Motherboard layout for the location of the CPU Overvoltage jumper. Chapter 3 ASUS X99-PRO/USB 3.1 3-27
  • Asus X99-PRO USB 3.1 | User Guide - Page 106
    Fully Manual Mode [Disabled] Enable this item to configure the CPU-related voltages. This ASUS exclusive mode provides the optimum voltage adjusting capability for the CPU core, cache, and system agent voltages. You can adjust these voltages separately without the restrictions from the CPU
  • Asus X99-PRO USB 3.1 | User Guide - Page 107
    set the CPU Cache Voltage to [Manual Mode]. CPU Cache Voltage Override [Auto] This item allows you to configure the CPU cache CPU Cache Voltage [Auto] This item sums up the voltages of the CPU Cache Voltage offset and Additional Turbo Mode CPU Cache Voltage options. Chapter 3 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 108
    from 0.80 V to 2.70 V at 0.010 V increment. DRAM SVID Support [Auto] Set this item to [Disabled] to stop the CPU from communicating with the external voltage regulator. Disable this item when you overclock from 0.7000 V to 1.8000 V at 0.00625 V increment. Chapter 3 3-30 Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 109
    or keys to adjust the value. Configuration options: [Auto] [1] - [20] CPU Spread Spectrum [Auto] This item allows you to enhance the BCLK overclocking capability or reduce the enhance BCLK overclocking. Configuration options: [Auto] [Disabled] [Enabled] Chapter 3 ASUS X99-PRO/USB 3.1 3-31
  • Asus X99-PRO USB 3.1 | User Guide - Page 110
    3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Chapter 3 3-32 Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 111
    this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Chapter 3 Hyper with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Configuration options: [Disabled] [Enabled] ASUS X99-PRO/USB 3.1 3-33
  • Asus X99-PRO USB 3.1 | User Guide - Page 112
    [Enabled] This item allows the CPU to prefetch commands and data in of your CPU. Active Processor Core (0-5) [Enabled] Configuration options: [Enabled] [Disabled] CPU Power Management CPU's power. Enhanced Intel SpeedStep Technology [Enabled] This item allows your system to adjust the CPU
  • Asus X99-PRO USB 3.1 | User Guide - Page 113
    system. Configuration options: [Enabled] [Disabled] Package C State Support [Auto] This item allows you to set the a C-state support for the CPU package. Configuration options: [Auto] [Enabled] [C0/C1 runs at PCI-E 2.0 speed. Configuration options: [Auto] [Gen1] [Gen2] ASUS X99-PRO/USB 3.1 3-35
  • Asus X99-PRO USB 3.1 | User Guide - Page 114
    show Not Present if no SATA device is installed to the corresponding SATA port. Scroll down to display the other BIOS items. Chapter 3 SATAEXPRESS_1 SRIS Support [Auto] When set to [Auto], this item allows the system to automatically adjust the SRIS (Separate Reference Clock Independent Spread
  • Asus X99-PRO USB 3.1 | User Guide - Page 115
    driver Support Aggressive Link Power Management [Disabled] This item is designed for LPM (link power management) support with a better energy saving conditions. When disabled, the hot plug function of SATA ports are disabled. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 116
    ] PCIEX16_7 Link Speed [Auto] This item allows you to select the operating speed of the PCIEX16_7 slot. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] 3-38 Chapter 3: BIOS setup Chapter 3
  • Asus X99-PRO USB 3.1 | User Guide - Page 117
    at USB 3.0 mode when the xHCI driver is installed in the operating system. [Smart Auto] Upon detection, the xHCI driver supports the USB 3.0 mode during both POST and operating system. [Enabled] Enables the xHCI controller. [Disabled] Disables the xHCI controller. ASUS X99-PRO/USB 3.1 3-39
  • Asus X99-PRO USB 3.1 | User Guide - Page 118
    without an EHCI hand‑off feature. [Disabled] Disables the EHCI Hand-off support. USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.2.2 Motherboard layout for the location of the USB ports. Chapter 3 3-40 Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 119
    This item allows you to enable/disable the PCH DMI ASPM Setting. Configuration options: [Disabled] [Enabled] ASPM Support [Disabled] This item allows you to enable/disable the ASPM support for all downstream devices. Configuration options: [Disabled] [L1 only] Chapter 3 ASUS X99-PRO/USB 3.1 3-41
  • Asus X99-PRO USB 3.1 | User Guide - Page 120
    Onboard Devices Configuration Scroll down to view the other BIOS items. HD Audio Controller [Enabled] This item 97 or high-definition audio depending on the audio standard that the front panel audio module supports. [HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio
  • Asus X99-PRO USB 3.1 | User Guide - Page 121
    with USB3_E56 port and PCIEx1_1 slot enabled. [X4 Mode] Runs at x4 mode for a high performance support with USB3_E56 port and PCIEx1_1 slot disabled. PCI-EX16_4 Slot (Black) Bandwidth [Auto] [Auto] Intel® LAN controller. Configuration options: [On] [Off] Chapter 3 ASUS X99-PRO/USB 3.1 3-43
  • Asus X99-PRO USB 3.1 | User Guide - Page 122
    the serial port. This items in this menu works only if a serial port connector is installed on the motherboard. Serial Port [On] This item allows you to enable/disable the serial port. Configuration options: [On] -E LAN cards. Configuration options: [Disabled] [Enabled] 3-44 Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 123
    you to enable/disable the Power On by Ring feature of your motherboard. Configuration options: [Disabled] [Enabled] Power On By RTC [Disabled Support [Enabled] This item allows you to enable/disable the Ipv4/Ipv6 PXE wake event. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 124
    other BIOS items. CPU Temperature / MB Temperature / VRM Temperature / PCH Core Temperature / T-SENSOR1 Temperature / EXT_Sensor1 Temperature / EXT_ Sensor2 Temperature / EXT_Sensor3 Temperature [xxx°C/xxx°F] The onboard hardware monitor automatically detects and displays the CPU, motherboard, VRM
  • Asus X99-PRO USB 3.1 | User Guide - Page 125
    . CPU Lower Temperature [20] Use the or keys to adjust the CPU fan's lower temperature. The values range from 20% to 75%. CPU Fan Min. Duty Cycle(%) [20] Use the or keys to adjust the minimum CPU fan duty cycle. The values may differ via Qfan tuning. Chapter 3 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 126
    DC Mode, PWM Mode, or disable these Q-Fan controls from your motherboard. Configuration options: [Disabled] [DC Mode] [PWM Mode] The following to [Manual]. Chassis Fan 1/4 Upper Temperature [70] Use the or keys to adjust the upper limit of the CPU temperature. The Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 127
    disable these extension Q-Fan controls from your motherboard. Configuration options: [Disabled] [DC CPU] This item controls the assigned fan according to the selected temperature source. Configuration options: [CPU maximum chassis fan speed. [Manual] Set to assign detailed ASUS X99-PRO/USB 3.1 3-49
  • Asus X99-PRO USB 3.1 | User Guide - Page 128
    drops below the lower temperature. Configuration options: [Disabled] [Enabled] Anti Surge Support [ON] This item allows you to turn on/off the OVP (Over safe range that protects the motherboard's components. Configuration options: [ON] [OFF] Chassis Intrude Detect Support [ON] This item allows you
  • Asus X99-PRO USB 3.1 | User Guide - Page 129
    ]. SATA Support [All USB devices will not be available until OS boot up for a fastest POST time. All USB devices will be available during POST. This process will extend the POST time. For a faster POST time, only USB ports with keyboard and mouse connections will be detected. ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 130
    Driver Support [Disabled] [Disabled] Select to skip the network stack driver from loading during POST. [Enabled] Select to load the network stack driver you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot.
  • Asus X99-PRO USB 3.1 | User Guide - Page 131
    the addon devices. [Enabled] For better compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. [Disabled] Disables the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. Chapter 3 ASUS X99-PRO/USB 3.1 3-53
  • Asus X99-PRO USB 3.1 | User Guide - Page 132
    to launch. Configuration options: [Legacy OpROM first] [UEFI driver first] [Ignore] Boot from Storage Devices [Legacy OpROM first Windows® nonUEFI mode. Microsoft® Secure Boot only supports Windows® UEFI mode. Key Management This item USB storage device. Chapter 3 3-54 Chapter 3: BIOS setup
  • Asus X99-PRO USB 3.1 | User Guide - Page 133
    of UEFI applications, operating system loaders, and UEFI drivers that you can load on the single computer. Delete USB storage device. Append db from File This item allows you to load the additional db from a storage device so that more images can be loaded securely. Chapter 3 ASUS X99-PRO/USB
  • Asus X99-PRO USB 3.1 | User Guide - Page 134
    from File This item allows you to load the downloaded dbx from a USB storage device. Configuration options: [Yes] [No] Append dbx from File This > after POST (Windows® 8 not supported). • To select the boot device during system startup, press when ASUS Logo appears. Boot Override These item
  • Asus X99-PRO USB 3.1 | User Guide - Page 135
    item allows you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.11.2 ASUS EZ Flash 2. ASUS X99-PRO/USB 3.1 3-57 Chapter 3
  • Asus X99-PRO USB 3.1 | User Guide - Page 136
    and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version. Profile Name This item allows you to key in a profile name. Save
  • Asus X99-PRO USB 3.1 | User Guide - Page 137
    3.9.3 ASUS DRAM SPD Information This item allows you to view the DRAM SPD information. Chapter 3 ASUS X99-PRO/USB 3.1 3-59
  • Asus X99-PRO USB 3.1 | User Guide - Page 138
    you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from appears. Select Yes to discard changes and exit. Launch EFI Shell from USB drives This option allows you to attempt to launch the EFI Shell application
  • Asus X99-PRO USB 3.1 | User Guide - Page 139
    version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system's failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.com to download the latest BIOS file for this motherboard. The following
  • Asus X99-PRO USB 3.1 | User Guide - Page 140
    Folder Info field. 6. Press the Up/Down arrow keys to find the BIOS file, and then press to perform the BIOS update process. Reboot the system when the update process is done. • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO
  • Asus X99-PRO USB 3.1 | User Guide - Page 141
    actually shown on your computer screen. Before updating BIOS • Prepare the motherboard support DVD and a USB flash drive. • Download the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive. NTFS is not supported under DOS environment. Ensure that your
  • Asus X99-PRO USB 3.1 | User Guide - Page 142
    file and BIOS Updater to the USB port. 2. Boot your computer then press to launch the select boot device screen. 3. When the select boot device screen appears, insert the Support DVD into the optical drive then select the optical drive as the boot device. Please select boot device: E1: ASUS DVD
  • Asus X99-PRO USB 3.1 | User Guide - Page 143
    to select the BIOS file and press . 4. After the BIOS Updater checks the selected BIOS file, select Yes to confirm the BIOS update. Are you sure you want to update the BIOS? Yes No The BIOS Backup feature is not supported due to security regulations. Chapter 3 ASUS X99-PRO/USB 3.1 3-65
  • Asus X99-PRO USB 3.1 | User Guide - Page 144
    the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select Load Optimized Defaults item under the Exit BIOS menu. See chapter BIOS setup, section Exit menu of your User Guide for details. Chapter
  • Asus X99-PRO USB 3.1 | User Guide - Page 145
    radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that compliance could void the user's authority to operate this equipment. ASUS X99-PRO/USB 3.1 A-1
  • Asus X99-PRO USB 3.1 | User Guide - Page 146
    IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada
  • Asus X99-PRO USB 3.1 | User Guide - Page 147
    our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. should not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment Appendices ASUS X99-PRO/USB 3.1 A-3
  • Asus X99-PRO USB 3.1 | User Guide - Page 148
    ai requisiti essenziali e alle altre disposizioni pertinenti alle direttive CE. Per maggiori informazioni fate riferimento alla dichiarazione di conformità CE. ASUS AsusTek Inc CE CE Hrvatski AsusTek Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim zahtjevima i ostalim odgovaraju
  • Asus X99-PRO USB 3.1 | User Guide - Page 149
    -23, D-40880 Ratingen, Germany Fax +49-2102-959911 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-1805-010923* Support Fax +49-2102-9599-11 Online support http://www.asus.com/de/support/ Appendices ASUS X99-PRO/USB 3.1 A-5
  • Asus X99-PRO USB 3.1 | User Guide - Page 150
    2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont, CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : X99-PRO, X99-A X99-PRO/USB 3.1, X99-A/USB 3.1 Conforms to the following
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Motherboard
X99-PRO/
USB 3.1