Asus Z10PH-D16 User Guide

Asus Z10PH-D16 Manual

Get Asus Z10PH-D16 PDF manuals and user guides View all Asus Z10PH-D16 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus Z10PH-D16 manual content summary:

  • Asus Z10PH-D16 | User Guide - Page 1
    Z10PH-D16 Server Motherboard User Guide
  • Asus Z10PH-D16 | User Guide - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus Z10PH-D16 | User Guide - Page 3
    used in this guide xi Typography...xi Z10PH-D16 specifications summary xii Chapter 1: Product Introduction 1.1 Welcome!...1-2 1.2 Package contents 1-2 1.3 Serial number label 1-3 1.4 Special features 1-3 1.4.1 Product highlights 1-3 1.4.2 Innovative ASUS features 1-4 Chapter 2: Hardware
  • Asus Z10PH-D16 | User Guide - Page 4
    34 2.8 Z10PH-D16 Golden Finger 2-38 Chapter 3: Powering Up 3.1 Starting up for the first time 3-2 3.2 Powering off the computer 3-3 3.2.1 Using the OS shut down function 3-3 3.2.2 Using the dual function power switch 3-3 Chapter 4: BIOS setup 4.1 Managing and updating your BIOS 4-2 4.1.1 ASUS
  • Asus Z10PH-D16 | User Guide - Page 5
    Processor Configuration 4-25 4.5.2 Advanced Power Management Configuration 4-27 4.5.3 Server ME Configuration 4-37 4.5.10 Runtime Error Logging Support 4-37 4.6 Server Mgmt menu 4-38 4.7 disk drives 5-3 5.1.3 Setting the RAID item in BIOS 5-3 5.1.4 RAID configuration utilities 5-3 5.2 LSI
  • Asus Z10PH-D16 | User Guide - Page 6
    the BIOS Setup Support DVD 6-13 6.4 Intel® chipset device software installation 6-17 6.5 Installing the Intel® I210 Gigabit Adapters driver 6-19 6.6 VGA driver installation 6-22 6.7 Intel® Rapid Storage Technology enterprise 4.0 installation 6-24 Appendices A.1 Z10PH-D16 block diagram A-2 ASUS
  • Asus Z10PH-D16 | User Guide - Page 7
    frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no , we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. vii
  • Asus Z10PH-D16 | User Guide - Page 8
    to a major failure. If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://support.asus.com Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When
  • Asus Z10PH-D16 | User Guide - Page 9
    the manuals that came with the package. • Before using the product, make sure all cables are correctly connected and the power cables are on a stable surface. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. DO NOT throw the motherboard
  • Asus Z10PH-D16 | User Guide - Page 10
    Detailed descriptions of the BIOS parameters are also provided. • Chapter 5: RAID configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. • Chapter 6: Driver installation This chapter provides instructions for installing the
  • Asus Z10PH-D16 | User Guide - Page 11
    manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions exactly as shown, then supply the required item or value enclosed in brackets.
  • Asus Z10PH-D16 | User Guide - Page 12
    summary Model Name Processor Support / System Bus Core Logic Form Factor Fan Speed Control ASUS Features Rack Optimized (Dedicated for Rack) ASWM Enterprise Total Slots Voltage Capacity Memory Memory Type Z10PH-D16 2 x Socket R3 (LGA 2011-3) Intel® Xeon® processor E5-2600
  • Asus Z10PH-D16 | User Guide - Page 13
    Z10PH-D16 specifications summary Onboard I/O Connectors Rear I/O Connectors Management Solution Monitoring Environment TPM Header PSU Connector Management Connector USB Connectors Fan Header SMBus Chassis Intruder Front LAN LED Serial Port Header Device Power ASUS Server AVL for latest update.
  • Asus Z10PH-D16 | User Guide - Page 14
    xiv
  • Asus Z10PH-D16 | User Guide - Page 15
    Chapter 1: Product Introduction Product introduction This chapter describes the motherboard features and the new technologies it supports. 1
  • Asus Z10PH-D16 | User Guide - Page 16
    1.1 Welcome! Thank you for buying an ASUS® Z10PH-D16 motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the
  • Asus Z10PH-D16 | User Guide - Page 17
    The motherboard supports DDR4 memory that features faster clock frequencies and higher data transfer rates of 1333 MT/s to 2133 MT/s (million transfers per second). DDR4 offers a lower voltage standard of 1.2V that reduces memory power demand and provides improved performance. ASUS Z10PH-D16 1-3
  • Asus Z10PH-D16 | User Guide - Page 18
    Xeon® processor E5-2600 v3 product family. It reduces thermal design power (TDP) and supports USB 3.0 and SATA III ports thus bringing more features and a stable supply of current for critical components. 1.4.2 Innovative ASUS features ASUS Fan Speed control technology The ASUS Fan Speed control
  • Asus Z10PH-D16 | User Guide - Page 19
    Chapter 2: Hardware Information Hardware Information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. 2
  • Asus Z10PH-D16 | User Guide - Page 20
    the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on
  • Asus Z10PH-D16 | User Guide - Page 21
    of your chassis to ensure that the motherboard fits into it. Ensure to unplug the chassis power cord before installing or removing the motherboard. Failure to do so can cause you physical injury can damage the motherboard. Place this side towards the rear of the chassis ASUS Z10PH-D16 2-3
  • Asus Z10PH-D16 | User Guide - Page 22
    2.2.3 Z10PH-D16 Motherboard layout 2-4 Chapter 2: Hardware information
  • Asus Z10PH-D16 | User Guide - Page 23
    (3-pin BMC_EN) 9. PMBus 1.2 PSU select jumper (3-pin SMART_PSU1) 10. power connectors (20-pin PWR1, 4-pin PWR2) 8. System panel connector (16-pin PANEL1 [White]) Page 2-7 2-12 2-15 Page 2-19 2-20 2-20 2-21 2-21 2-22 2-22 2-23 2-23 2-24 Page 2-28 2-29 2-29 2-30 2-30 2-31 2-32 2-33 ASUS Z10PH-D16
  • Asus Z10PH-D16 | User Guide - Page 24
    7. Location LED (LOCLED1) Golden Finger 1. Golden Finger 2. Golder Finger Power connector 3. FP Serial ATA connectors (7-pin FP_SATA5-6 [Light blue], FP_SATA7 -related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if
  • Asus Z10PH-D16 | User Guide - Page 25
    . • Before installing the CPU, ensure that the socket box is facing toward you and the triangle mark is on the lower-left position. triangle mark ASUS Z10PH-D16 2-7
  • Asus Z10PH-D16 | User Guide - Page 26
    2. Press the right load lever with your thumb (A), then slide it to the left (B) until it is released from the retention tab. Load plate DO NOT force to lift the load lever completely. 3. Press the left load lever with your thumb (C), slide it to the right (D) until it is released from the
  • Asus Z10PH-D16 | User Guide - Page 27
    plate The PnP cap pops out of the load plate when the left load lever is inserted into the retention tab. Keep the PnP cap. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the PnP cap on the LGA 2011-3 socket. ASUS Z10PH-D16 2-9
  • Asus Z10PH-D16 | User Guide - Page 28
    11. Push down the right load lever (K) then insert it under the retention tab (L). 12. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer. Some heatsinks come with pre-applied thermal paste.
  • Asus Z10PH-D16 | User Guide - Page 29
    motherboard. When the four screws are attached, tighten them one by one to completely secure the heatsink. Tighten the four heatsink screws in a diagonal sequence. A B B A ASUS Z10PH-D16 2-11
  • Asus Z10PH-D16 | User Guide - Page 30
    32 GB RDIMMs or 32 GB, 64 GB LR-DIMMs and NVDIMM into the DIMM sockets using the memory configurations in this section. • Refer to ASUS Server AVL for the updated list of compatible DIMMs. • When installing only one DIMM in a single CPU configuration, install the DIMM on either A1 or
  • Asus Z10PH-D16 | User Guide - Page 31
    (CPU2) A2 A1 B2 B1 C2 C1 D2 D1 E2 E1 F2 F1 G2 G1 H2 H1 2 DIMMs P P 4 DIMMs P P P P 8 DIMMs P P P P P P P P 12 DIMMs P P P P P PPPPP P P 16 DIMMs P P P P P P P P P P P P P P P P ASUS Z10PH-D16 2-13
  • Asus Z10PH-D16 | User Guide - Page 32
    in the motherboard package. • Refer to the user guide for qualified vendor lists of the memory modules. Removing a DIMM from a single clip DIMM socket 1. Press the retaining clip outward to unlock the DIMM. 2 2. Remove the DIMM from the socket. 1 Support the DIMM lightly with your fingers when
  • Asus Z10PH-D16 | User Guide - Page 33
    2.5 Expansion slots The following subsections describe the slots and expansion cards that they support. Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you the riser card is seated firmly in place. Riser card PCI-E x24 slot ASUS Z10PH-D16 2-15
  • Asus Z10PH-D16 | User Guide - Page 34
    2.5.3 Installing an expansion card Before installing an expansion card, read the documentation that came with it and ensure to make the necessary hardware settings. To install an expansion card: 1. Remove the system cover if your motherboard is already installed in a chassis. 2. Prepare the riser
  • Asus Z10PH-D16 | User Guide - Page 35
    4. Align and insert the riser card and expansion card assembly into the PCI-E slot on the motherboard. The expansion card fits in one orientation only. If it does not fit, try reversing it. 5. Replace the system cover. riser card and expansion card assembly PCI-E x24 slot ASUS Z10PH-D16 2-17
  • Asus Z10PH-D16 | User Guide - Page 36
    information on BIOS setup. 2. Assign an IRQ to the card. Refer to the table Standard Interrupt assignments in section Interrupt assignments for more information. 3. Install the software drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support "Share IRQ
  • Asus Z10PH-D16 | User Guide - Page 37
    then move the cap back to pins 1-2. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to reenter data. Except when clearing the RTC RAM, CMOS RTC RAM data. After the CMOS clearance, reinstall the battery. ASUS Z10PH-D16 2-19
  • Asus Z10PH-D16 | User Guide - Page 38
    2. VGA controller setting (3-pin VGA_SW1) This jumper allows you to enable or disable the onboard VGA controller. Set to pins 1-2 to activate the VGA feature. 3. LAN controller setting (3-pin LAN_SW1, LAN_SW2) These jumpers allow you to enable or disable the onboard Intel® Intel I210AT Gigabit LAN
  • Asus Z10PH-D16 | User Guide - Page 39
    Utility. 5. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to quickly recover the Intel Management Engine (ME) firmware when it becomes corrupted. ASUS Z10PH-D16 2-21
  • Asus Z10PH-D16 | User Guide - Page 40
    6. DDR4 thermal event setting (3-pin DIMMTRIP1) This jumper allows you to enable or disable DDR4 DIMM thermal sensing event pin. 7. Serial General Purpose Input/Output setting (3-pin SGPIO_SEL1) This jumper allows you to select a storage device. Set to pin 1-2 to enable onboard C612 chipset SATA
  • Asus Z10PH-D16 | User Guide - Page 41
    8. BMC Setting (3-pin BMC_EN) This jumper allows you to enable or disable the ASMB8. 9. PMBus 1.2 PSU select jumper (3-pin SMART_PSU1) This jumper allows you to select PSU PMBus version. Set to pins 1-2 for PMBus, set to pins 2-3 for others. ASUS Z10PH-D16 2-23
  • Asus Z10PH-D16 | User Guide - Page 42
    10. Chassis Intrusion (2-pin INTRUSION1) These leads are for the intrusion detection feature for chassis with intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high level signal to these leads to record a chassis intrusion event. The default
  • Asus Z10PH-D16 | User Guide - Page 43
    display that shows the status of your system. Refer to the Q-Code table of this user guide for more information about the 2-digit codes. 5. Power LED/button. Press this button to turn the system on/off. 6. LAN (RJ-45) 10 Mbps connection 100 Mbps connection 1 Gbps connection ASUS Z10PH-D16 2-25
  • Asus Z10PH-D16 | User Guide - Page 44
    Q-Code table Action Normal boot PHASE Security Phase PEI(Pre-EFI initialization) phase POST CODE 01 02 03 06 04 10 15 19 78~00 A1 A3 A7 A8 A9 AA AB AC AD AE AF 2F B0 B1 AF B4 B2 B3 B5 B6 B7 B8 B9 BA BB BC BF 5A 31 32 34 36 4F TYPE Progress Progress Progress Progress Progress Progress Progress
  • Asus Z10PH-D16 | User Guide - Page 45
    AMI Super IO start AMI USB Driver Init. AMI USB Driver Init. AMI USB Driver Init. AMI USB Driver Init. Legacy Option ROM Init. Init. BIOS Setup Utility password verify BIOS Setup Utility start BIOS Setup Utility input wait Ready to boot event Legacy boot event APIC mode PIC mode ASUS Z10PH-D16 2-
  • Asus Z10PH-D16 | User Guide - Page 46
    a SATA cable. For more information, refer to the Z10PH-D16 Golden Finger section of this user guide. If you installed Serial ATA hard disk drives, you on the SATA RAID solutions supported on this motherboard, refer to the RAID Configuration chapter of this user guide. The actual data transfer rate
  • Asus Z10PH-D16 | User Guide - Page 47
    . These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. 3. Front fan connectors (4-pin FRNT_FAN1-4) The fan connectors support cooling fans of 350 mA-740 mA (8.88 W fan connectors! • All fans feature the ASUS Smart Fan technology. ASUS Z10PH-D16 2-29
  • Asus Z10PH-D16 | User Guide - Page 48
    ends to the devices, which you want to monitor temperature. Go to BIOS setup to change the default setting of TR1 from "Disabled" to "Enabled cable. 5. Trusted Platform Module connector (20-1 pin TPM1) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys,
  • Asus Z10PH-D16 | User Guide - Page 49
    (NGFF1) This connector allows you to install an M.2 device. • This connector supports type 2242 devices on both SATA and PCI-E interface. • Please refer to the You need to install a second CPU (on CPU2) to support this function. The M.2 (NGFF) device is purchased separately ASUS Z10PH-D16 2-31
  • Asus Z10PH-D16 | User Guide - Page 50
    4-pin PWR2 is designed for hard disk drives power supply. DO NOT connect other 4-pin power connectors of the power supply unit (PSU) to this connector. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable
  • Asus Z10PH-D16 | User Guide - Page 51
    supports several chassis-mounted functions. A. System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power mode depending on the BIOS settings. Pressing the power switch for more than ASUS Z10PH-D16 2-33
  • Asus Z10PH-D16 | User Guide - Page 52
    (BMCLED1) The green heartbeat LED blinks per second to indicate that the ASMB8 is working normally. • The heartbeat LED functions only when you enable the ASUS ASMB8. • Everytime after the AC power is replugged, you have to wait for about 30 seconds for the system to
  • Asus Z10PH-D16 | User Guide - Page 53
    the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. 4. CATT ERR LED (CATTERR1) The CATT ERR LED indicates that the system has experienced a fatal or catastrophic error and cannot continue to operate. ASUS Z10PH-D16
  • Asus Z10PH-D16 | User Guide - Page 54
    5. Hard disk activity LED (HDDLED1) This LED is for the storage add-on card cable connected to the SATA or SAS add-on card. The read or write activities of any device connected to the SATA or SAS add-on card causes the front panel LED to light up. 6. Message LED (MESLED1) This onboard LED lights up
  • Asus Z10PH-D16 | User Guide - Page 55
    7. Location LED (LOCLED1) This onboard LED lights up when the Location button on the server is pressed or when triggered by a system management software. The Location LED helps visually locate and quickly identify the server in error on a server rack. ASUS Z10PH-D16 2-37
  • Asus Z10PH-D16 | User Guide - Page 56
    of the motherboard's onboard connectors and switches. Refer to the following illustration for the golden finger's pin definitions. The golden finger of Z10PH-D16 ships with a cap to protect the pins. Ensure to remove the cap before using the golden finger. 2-38 Chapter 2: Hardware information
  • Asus Z10PH-D16 | User Guide - Page 57
    connector Refer to the following illustration for the golden finger's power pin definition. 3. FP Serial ATA connectors (7-pin FP_SATA5-6 [Light blue], FP_SATA7 [light gray]) These connectors the onboard SATA ports (SATA1-6) or from any SATA port from the add-on storage cards. ASUS Z10PH-D16 2-39
  • Asus Z10PH-D16 | User Guide - Page 58
    2-40 Chapter 2: Hardware information
  • Asus Z10PH-D16 | User Guide - Page 59
    Chapter 3: Powering Up Powering Up This chapter describes the power up sequence, and ways of shutting down the system. 3
  • Asus Z10PH-D16 | User Guide - Page 60
    long 2 long BIOS Beep codes Error condition Power supply surges detected during the previous power on. No Keyboard Detected. No DIMM Detected. No VGA Detected. Chassis Intrusion. BIOS-image Crash Detected. 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in
  • Asus Z10PH-D16 | User Guide - Page 61
    the system is ON, press the power switch for less than four seconds to put the system to sleep mode or to soft-off mode, depending on the BIOS setting. Pressing the power switch for more than four seconds lets the system enter the soft-off mode regardless of the BIOS setting. ASUS Z10PH-D16 3-3
  • Asus Z10PH-D16 | User Guide - Page 62
    3-4 Chapter 3: Powering up
  • Asus Z10PH-D16 | User Guide - Page 63
    Chapter 4: BIOS setup BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. 4
  • Asus Z10PH-D16 | User Guide - Page 64
    . Save a copy of the original motherboard BIOS file to a bootable USB flash disk drive in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the BUPDATER utility. 4.1.1 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows
  • Asus Z10PH-D16 | User Guide - Page 65
    EZ Flash Utility. Press . ASUS Tek. EzFlash Utility Current Platform Platform : Z10PH-D16 Version : 0020 Build Date :04/25/2014 New Platform Platform : Z10PH-D16 Version : 0022 Build Date :05/05/2014 FS0 System Volume Information Z10PH-D16 BIOS Windows [Up/Down
  • Asus Z10PH-D16 | User Guide - Page 66
    using the BUPDATER utility: 1. Visit the ASUS website at www.asus.com and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com to the bootable USB flash
  • Asus Z10PH-D16 | User Guide - Page 67
    shut down or reset the system while updating the BIOS to prevent system boot failure! 5. The utility returns to the DOS prompt after the BIOS update process is completed. Reboot the system from the hard disk drive. The BIOS update is finished! Please restart your system. C:\> ASUS Z10PH-D16 4-5
  • Asus Z10PH-D16 | User Guide - Page 68
    of your computer in the future. For example, you can enable the security password feature or change the power management settings. This requires you to reconfigure your system using the BIOS Setup program so that the computer can recognize these changes and record them in the CMOS RAM of the
  • Asus Z10PH-D16 | User Guide - Page 69
    4.2.1 BIOS menu screen Menu items Menu bar Configuration changing the event log settings Monitor For displaying the system temperature, power status, and changing the fan settings Security For changing the security settings keyboard until the desired item is highlighted. ASUS Z10PH-D16 4-7
  • Asus Z10PH-D16 | User Guide - Page 70
    the submenu, select the item then press . 4.2.5 Navigation keys At the bottom right corner of a menu screen are the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and change the settings. 4.2.6 General help At the top right corner of the
  • Asus Z10PH-D16 | User Guide - Page 71
    4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears. The Main menu provides you an overview of the basic system information, and allows Day xx/xx/xxxx] Allows you to set the system date. 4.3.2 System Time [xx:xx:xx] Allows you to set the system time. ASUS Z10PH-D16 4-9
  • Asus Z10PH-D16 | User Guide - Page 72
    4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 4-10 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 73
    Settings Enable ACPI Auto Configuration [Disabled] Allows you to enable or disable the BIOS ACPI Auto Configuration. Configuration options: [Disabled] [Enabled] Enable Hibernation [Enabled] Allows Self Test on all HDDs during POST. Configuration options: [Disabled] [Enabled] ASUS Z10PH-D16 4-11
  • Asus Z10PH-D16 | User Guide - Page 74
    =3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] 4-12 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 75
    LAN I210 LAN1 / LAN2 Enable is set to [Enabled]. LAN1/ LAN2 Option ROM Support [Enabled] Allows you to load the Intel LAN ROM. Configuration options: [Disabled] [Enabled] Intel LAN ROM Type [PXE] Allows you to select the Intel LAN ROM type. Configuration options: [PXE] [iSCSI] ASUS Z10PH-D16 4-13
  • Asus Z10PH-D16 | User Guide - Page 76
    host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings. 4-14 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 77
    ] This allows you to set the number of rows and columns supported on the Legacy OS. Configuration options: [80x24] [80x25] Putty Keypad [VT100] This allows you to select the FunctionKey and Keypad on Putty. Configuration options: [VT100] [LINUX] [XTERMR6] [SCO] [ESCN] [VT400] ASUS Z10PH-D16 4-15
  • Asus Z10PH-D16 | User Guide - Page 78
    Redirection After BIOS POST [Always Enable] This setting allows you to specify if Bootloader is selected than Legacy console redirection. Configuration options: [Always Enable] [Bootloader] Serial Port for Out-of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection [
  • Asus Z10PH-D16 | User Guide - Page 79
    . [Enabled] Enables the PCIE devices to generate a wake event. Power On By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. [Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ Minute/Second will become user-configurable with set values. ASUS Z10PH-D16 4-17
  • Asus Z10PH-D16 | User Guide - Page 80
    decoded in above 4G address space. It only works if the system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] SR-IOV Support [Disabled] This option enables or disables SIngle Root IO Virtualization Support if the system has SRIOV capable PCIe devices. Configuration options
  • Asus Z10PH-D16 | User Guide - Page 81
    or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be created. Configuration options: [Disabled] [Enabled]. PXE boot wait time [0] Wait time to press ESC key to abort the PXE boot. Media detect time [0] Wait time (in seconds) to detect media. ASUS Z10PH-D16 4-19
  • Asus Z10PH-D16 | User Guide - Page 82
    ] This option allows you to enable or disable CSM Support. Configuration options: [Disabled] [Enabled] GateA20 Active [Upon Request] This allows you to set the GA20 option. Configuration options: [Upon Request] [Always] Option ROM Messages [Force BIOS] This allows you to set the display mode for
  • Asus Z10PH-D16 | User Guide - Page 83
    4.4.10 Trusted Computing Configuration Security Device Support [Disabled] Allows you to enable or disable the BIOS support for security device. Configuration options: [Disabled] [Enabled] ASUS Z10PH-D16 4-21
  • Asus Z10PH-D16 | User Guide - Page 84
    Enabled] EHCI Hand-off [Disabled] This is a workaround for 0Ses without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. Configuration options: [Disabled] [Enabled] USB Mass Storage Driver Support [Enabled] Allows you to enable or disable the USB Mass Storage drvier
  • Asus Z10PH-D16 | User Guide - Page 85
    sec] Device power-up delay [ Manual] Mass Storage Devices Generic 8.07 [Auto] Allows you to select the mass storage device emulation type. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM] 4.4.12 iSCSI Configuration Allows you to configure the iSCSi parameters. ASUS Z10PH-D16
  • Asus Z10PH-D16 | User Guide - Page 86
    4.5 IntelRCSetup menu The IntelRCSetup menu items allow you to change the processor and chipset settings. 4-24 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 87
    ] [Enabled] Enable Intel TXT Support [Disabled] Forces the XD feature log to always return 0 when disabled. Configuration options: [Disabled] [Enabled] VMX [Enabled] Enables the Vanderpool Technology. Takes effect after reboot. Configuration options: [Disabled] [Enabled] ASUS Z10PH-D16 4-25
  • Asus Z10PH-D16 | User Guide - Page 88
    [40] [48] [56] [64] [72] [80] [88] [96] [104] [112] AES-NI [Enabled] This Item allows you to enable or disable the AES-NI support. Configuration options: [Disabled] [Enabled] Down Stream PECI [Disabled] This Item allows you to enable the PCIe Down Stream PECI writer. Configuration options: [Disabled
  • Asus Z10PH-D16 | User Guide - Page 89
    you to set additional CPU Power Management settings. Energy Perf BIAS Energy Performance Tuning [Disabled] Allows your system to select from BIOS or operating system to choose the OS setting. Configuration options: [Performance] [Balanced Performance] [Balanced Power] [Power] ASUS Z10PH-D16 4-27
  • Asus Z10PH-D16 | User Guide - Page 90
    /Performance Switch [Enabled] Allows you to switch between Power or performance. Configuration options: [Disabled] [Enabled] Workload Configuration [Balanced] Optimization for the workload the Non uniform Memory Access (NUMA). Configuration options: [Disabled] [Enabled] 4-28 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 91
    frequency Configuration options: [Auto] [6.4 GT/s] [8.0 GT/s] [9.6 GT/s] QPI Link0p Enable [Enable] Configuration options: [Disable] [Enable] QPI Link1 Enable [Enable] Configuration options: [Disable] [Enable] QPI Status ASUS Z10PH-D16 4-29
  • Asus Z10PH-D16 | User Guide - Page 92
    mem Training Error. Configuration options: [Disabled] [Enabled] ECC Support [Auto] Allows you to enable or disable the ECC support. Configuration options: [Auto] [Disabled] [Enabled] Enhanced Log detecting and enabling of ADR. Configuration options: [Disabled] [Enabled] 4-30 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 93
    configure the CKE and other related Memory Power Savings features. Configuration options: [Auto] [Disabled] [APD On] [User Defined] [Reserve] [Reserved] Memory Power Savings Advanced Options CK in SR SR when enabled. Configuration options: [Disabled] [Input-only] [Output-only] ASUS Z10PH-D16 4-31
  • Asus Z10PH-D16 | User Guide - Page 94
    Allows you to enable or disable RAS Modes. Enabling Sparing and Mirroring is not supported. In case enabled, Sparing will be selected. Configuration options: [Disabled] [Mirror] [Lockstep Mode] enable or disable Demand Scrub. Configuration options: [Disabled] [Enabled] 4-32 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 95
    I/O. Configuration options: [Disabled] [Enabled] PCI Express Global Options TX EQ WA [Enabled] Use special table for TX_EQ and vendor specific cards. Configuration options: [Disabled] [Enabled] ASUS Z10PH-D16 4-33
  • Asus Z10PH-D16 | User Guide - Page 96
    option enables or disables the ASPM support for all downstream devices. Configuration options: [Disabled] [L1 Only] 4.5.7 PCH Configuration PCH Devices DeepSx Power Policies [Disabled] Allows you to configure the PCH DMI ASPM. Configuration options: [Disabled] [Enabled] 4-34 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 97
    to enable or disable the Suport Aggressive Link Power (SALP) Management. Configuration options: [Disabled] [Enabled] SATA Port 1~6 Port 1/ Port 2/ Port 3/ Port 4/ Port 5/ Port 6 [Enabled] Allows you to enable or disable the SATA port Configuration options: [Disabled] [Enabled] ASUS Z10PH-D16 4-35
  • Asus Z10PH-D16 | User Guide - Page 98
    (D31:F6). Configuration options: [Auto] [Disabled] [Enabled] Alert Enable Lock [Disabled] Allows you to lock all Alert Enable settings. Configuration options: [Disabled] [Enabled] 4-36 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 99
    Injection Support [Disabled] When enabled, S/W Error Injection is supported by unlocking MSR 0x790. Configuration options: [Disabled] [Enabled] Whea Settings Whea Support [Enabled] This item allows you to enable or disable the WHEA support. Configuration options: [Disabled] [Enabled] ASUS Z10PH-D16
  • Asus Z10PH-D16 | User Guide - Page 100
    to change the settings. OS Watchdog Timer [Disabled] This item allows you to start a BIOS timer which can only be shut off by Intel Management Software after the OS loads. Configuration Boot Watch Timer expires. Configuration options: [Do Nothing] [Reset] [Power Down] 4-38 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 101
    the logging of EFI Status Codes, or log only error code, or only progress code or, both. Configuration options: [Disabled] [Both] [Error code] [Progress code] ASUS Z10PH-D16 4-39
  • Asus Z10PH-D16 | User Guide - Page 102
    State] This item allows you to configure LAN channel parameters statistically or dynamically (by BIOS or BMC). Unspecified option will not modify any BMC network parameters during BIOS phase. Configuration options: [Previous State] [Unspecified] [Static] [DynamicBmcDhcp] View System Event Log This
  • Asus Z10PH-D16 | User Guide - Page 103
    : [Disable] [Enable] IPv6 Display Letter Case [Upper Case] Displays the uppercase or lowercase letters of the alphabet. Configuration options: [Lower Case] [Upper Case] IPv6 BMC Lan Option [Enable] This . Disabling this option will not modify any BMC network during BIOS phase. ASUS Z10PH-D16 4-41
  • Asus Z10PH-D16 | User Guide - Page 104
    IP BMC Lan Option to [Enable]. IPv6 BMC LAN IP Address Source [Previous State] Select to configure LAN channel parameters statically or dynamically(by BIOS or BMC). Configuration options: [Previous State] [Static] [Dynamic-Obtained by BMC running DHCP] The following items appear only when you set IP
  • Asus Z10PH-D16 | User Guide - Page 105
    reset] When Log is Full [Do Nothing] Allows you to choose options for reactions to a full Smbios Event Log. Configuration options: [Do Nothing] [Erase Immediately] ASUS Z10PH-D16 4-43
  • Asus Z10PH-D16 | User Guide - Page 106
    Smbios Types (Not all may be translated). Configuration options: [Disabled] [Enabled] 4.7.2 View Smbios Event Log Press to view all smbios event logs. 4-44 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 107
    4.8 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to view the other Allows you to configure the fan speed control. Configuration options: [Generic Speed] [High Speed] [Full Speed] [Manual Mode] ASUS Z10PH-D16 4-45
  • Asus Z10PH-D16 | User Guide - Page 108
    the administrator password, follow the same steps as in changing an administrator password, but press when prompted to create/confirm the password. 4-46 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 109
    the CSM function is disabled. Configuration options: [Disabled] [Enabled] Secure Boot Mode [Custom] Allows you to set the Secure Boot selector. Configuration options: [Custom] [Standard] ASUS Z10PH-D16 4-47
  • Asus Z10PH-D16 | User Guide - Page 110
    Key (KEK)/ Authorized Signatures (DB)/ Authorized TimeStamps (DBT)/ Forbidden Signatures (DBX) Configuration options: [Delete] [Set New] [Append] Configuration options: [Set New] [Delete] [Append] 4-48 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 111
    the number of seconds to wait for setup activation key. Bootup NumLock State [On] Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On] Boot Logo Display [Disabled] Allows you to depends on the number of devices installed in the system. ASUS Z10PH-D16 4-49
  • Asus Z10PH-D16 | User Guide - Page 112
    Tool menu The Tool menu items allow you to configure options for special functions. Select an item then press to display the submenu. ASUS EZ Flash Allows you to run ASUS EZ Flash BIOS ROM Utility when you press . Refer to the ASUS EZ Flash Utility section for details. 4-50 Chapter
  • Asus Z10PH-D16 | User Guide - Page 113
    4.12 Exit menu The Exit menu items allow you to save or discard your changes to the BIOS items. Pressing does not immediately exit this menu. Select one of the options from this menu setup options. Discard Changes Discard changes done so far to any of the setup options. ASUS Z10PH-D16 4-51
  • Asus Z10PH-D16 | User Guide - Page 114
    selected device. Launch EFI Shell from filesystem device Attempts to launch EFI Shell application (shellx64.efi) from one of the available filesystem devices. 4-52 Chapter 4: BIOS setup
  • Asus Z10PH-D16 | User Guide - Page 115
    Chapter 5: RAID Configuration RAID Configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. 5
  • Asus Z10PH-D16 | User Guide - Page 116
    drives for this setup. • If you want to boot the system from a hard disk drive included in a created RAID set, copy first the RAID driver from the support DVD to a floppy disk before you install an operating system to the selected hard disk drive. • Please refer to chapter 2 for how to select
  • Asus Z10PH-D16 | User Guide - Page 117
    Software Configuration Utility or the Intel® Rapid Storage Technology if you installed Serial ATA hard disk drives on the Serial ATA connectors supported by the Intel® C612 chipset. Refer to the succeeding section for details on how to use the RAID configuration utility. ASUS Z10PH-D16 5-3
  • Asus Z10PH-D16 | User Guide - Page 118
    hard disk drives connected to the SATA connectors supported by the motherboard's chip. To enter to enter the utility. LSI MegaRAID Software RAID BIOS Version A.10 09231523R LSI SATA RAID Found at priority of the SATA optical drive has to be manually adjusted. Otherwise, the system will not boot
  • Asus Z10PH-D16 | User Guide - Page 119
    the virtual drive parameters are set automatically. In New Configuration, you manually set the virtual drive parameters. Using Easy Configuration To create a RAID Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Configuration Menu Easy Configuration To Select An Option ASUS Z10PH-D16 5-5
  • Asus Z10PH-D16 | User Guide - Page 120
    ONLIN A[X]-[Y], where X is the array number, and Y is the drive number. LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Easy Configuration - ARRAY SELECTION MENU Management Menu Configure PORT # Initialize Objects 0 ONLIN A00-00 Rebuild 1 ONLIN A00-01
  • Asus Z10PH-D16 | User Guide - Page 121
    . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured ManagemeLnDt MenuERaAsIyD ConfSigzueration -#SAtRrRiApYesSELECTSItOrNipMSEzNU Cursor Keys To Navigate Between Items And Press Enter To Select An Option ASUS Z10PH-D16 5-7
  • Asus Z10PH-D16 | User Guide - Page 122
    from the menu, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured ManagemeLnDt MenuERaAsIyD ConfSigzueration -#SAtRrRiApYesSELECTSItOrNipMSEzNU Status CIonniftiigaulriez0e 1 148.580GB PORT #2 0 ONLIN A00
  • Asus Z10PH-D16 | User Guide - Page 123
    then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Management Menu Configure Configuration Menu Easy Configuration New Configuration View/Add Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option ASUS Z10PH-D16 5-9
  • Asus Z10PH-D16 | User Guide - Page 124
    Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Configuration Menu Easy Configuration Management MenuNew Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured ManagemeLnDt MenuERaAsIyD
  • Asus Z10PH-D16 | User Guide - Page 125
    and Y is the drive number. LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R View/Add Configuration - ARRAY SELECTION MENU Management Menu Configure PORT # Initialize Creating a RAID set: Using Easy Configuration to add a new RAID set. ASUS Z10PH-D16 5-11
  • Asus Z10PH-D16 | User Guide - Page 126
    From the Management Menu, select Initialize, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Management Menu Configure Initialize Objects Rebuild Check Consistency Initialize VD(s) Use Cursor Keys to Navigate Between Items And Press
  • Asus Z10PH-D16 | User Guide - Page 127
    press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Management Menu Configure Initialize Objects Rebuild Check Consistency Virtual Completed Status ONLINE Virtual Drives Virtual Drive 0 SPACE-(De)Select, F10-Initialize ASUS Z10PH-D16 5-13
  • Asus Z10PH-D16 | User Guide - Page 128
    Menu, select Objects > Virtual Drive, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Objects Management MAednaupter Configure Virtual Drive Initialize Physical Drive Objects Rebuild Check Consistency Change VD Parameters Use
  • Asus Z10PH-D16 | User Guide - Page 129
    start initialization. LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Objects Management MAednaupter Configure Virtual Drive Virtual Drive(1) Virtual to abort initialization. When initialization is completed, press . ASUS Z10PH-D16 5-15
  • Asus Z10PH-D16 | User Guide - Page 130
    drives You can manually rebuild failed hard disk drives using the Rebuild command in the Management Menu. To rebuild a failed hard disk drive 1. From the Management Menu, select Rebuild, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R
  • Asus Z10PH-D16 | User Guide - Page 131
    press to rebuild the drive. LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Management MenuREBUILD - PHYSICAL DRIVES SELECTION MENU Configure PORT # Initialize Objects 0 4. When rebuild is complete, press any key to continue. ASUS Z10PH-D16 5-17
  • Asus Z10PH-D16 | User Guide - Page 132
    From the Management Menu, select Check Consistency, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Management Menu Configure Initialize Objects Rebuild Check Consistency CC of VD(s) Use Cursor Keys to Navigate Between Items And Press
  • Asus Z10PH-D16 | User Guide - Page 133
    press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R LD Management Menu Configure 0 Initialize Objects Rebuild Check Consistency it continues from zero percent. 5. When checking is complete, press any key to continue. ASUS Z10PH-D16 5-19
  • Asus Z10PH-D16 | User Guide - Page 134
    Using the Objects command To check data consistency using the Objects command 1. From the Management Menu, select Objects, and then select Virtual Drive from the sub-menu. 2. Use the arrow keys to select the virtual drive you want to check, and then press . 3. Select Check Consistency from
  • Asus Z10PH-D16 | User Guide - Page 135
    . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Configuration Menu Easy Configuration Management MenuNew Configuration Configure View/ An Option The utility clears all the current array(s). 3. Press any key to continue. ASUS Z10PH-D16 5-21
  • Asus Z10PH-D16 | User Guide - Page 136
    Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Configuration Menu Easy Configuration Management MenuNew LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Configuration BMoeontuable VDs(1): Current Boot VD(0)
  • Asus Z10PH-D16 | User Guide - Page 137
    manually enable the RAID controller's WriteCache option after creating a RAID set to improve the data transmission performance. When you enable WriteCache, you may lose data when a power Off Rebuild Check Consistency Read Ahead = On Bios State = Enable Cont On Error = Yes ASUS Z10PH-D16 5-23
  • Asus Z10PH-D16 | User Guide - Page 138
    Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. Before you proceed, ensure that you have installed the through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may
  • Asus Z10PH-D16 | User Guide - Page 139
    the selection bar then press to select a disk. A small triangle before the Port number marks the selected drive. Press when you are done. ASUS Z10PH-D16 5-25
  • Asus Z10PH-D16 | User Guide - Page 140
    6. Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0, 10 and 5 only) then press . The available stripe size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for
  • Asus Z10PH-D16 | User Guide - Page 141
    VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) Are you sure you want to delete volume "Volume0"? (Y/N): ASUS Z10PH-D16 5-27
  • Asus Z10PH-D16 | User Guide - Page 142
    5.3.3 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set: 1. From the utility main menu, select 3. Reset Disks to Non-RAID and press <
  • Asus Z10PH-D16 | User Guide - Page 143
    Model Serial # Size X XXXXXXXXXXX XXXXXXXX XXX.GB [ ]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. ASUS Z10PH-D16 5-29
  • Asus Z10PH-D16 | User Guide - Page 144
    3. The utility immediately starts rebuilding after the disk is selected. When done, the status of the degraded RAID volume is changed to "Rebuild". Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023 Copyright(C) 2003-12 Intel Corporation. All Rights Reserved. [ MAIN MENU ]
  • Asus Z10PH-D16 | User Guide - Page 145
    bootable to boot from the hard disk. 1. Reboot the system and press to enter the BIOS setup utility during POST. 2. Go to the Boot menu and select the boot option priority. 3. , then press . 5. When the confirmation window appears, select Yes, then press . ASUS Z10PH-D16 5-31
  • Asus Z10PH-D16 | User Guide - Page 146
    disk drives that are connected to the Serial ATA connectors. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 6. To enter the Intel® Rapid Storage Technology enterprise utility
  • Asus Z10PH-D16 | User Guide - Page 147
    data on one of the selected disks, select NO when prompted. • If you want to Enable volume write-back cache or Initialize volume, click Advanced. ASUS Z10PH-D16 5-33
  • Asus Z10PH-D16 | User Guide - Page 148
    6. Confirm the volume creation, than click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. 7. Wait until the process is completed, then click OK when prompted. You still need to
  • Asus Z10PH-D16 | User Guide - Page 149
    RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. ASUS Z10PH-D16 5-35
  • Asus Z10PH-D16 | User Guide - Page 150
    5.4.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives.Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: 1. From the utility main menu, select the volume (exp. Volume_0000) in Volumes
  • Asus Z10PH-D16 | User Guide - Page 151
    , or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors ASUS Z10PH-D16 5-37
  • Asus Z10PH-D16 | User Guide - Page 152
    5-38 Chapter 5: RAID configuration
  • Asus Z10PH-D16 | User Guide - Page 153
    Chapter 6: Driver installation Driver installation This chapter provides the instructions for installing the necessary drivers for different system components in both Linux® and Windows® Operating Systems. 6
  • Asus Z10PH-D16 | User Guide - Page 154
    instructions on how to install the RAID controller drivers during OS installation. 6.1.1 Creating a RAID driver manually adjusted. Otherwise, the system will not boot from the connected SATA ODD. To create a RAID driver disk in Windows® environment 1. Start Windows®. 2. Place the motherboard support
  • Asus Z10PH-D16 | User Guide - Page 155
    Windows® Server 2008 R2 OS 1. Boot the computer using the Windows® Server 2008 R2 OS installation disc. Follow the screen instructions to start installing Windows Server 2008 R2. 2. When prompted to choose a type of installation, click Custom (advanced). 3. Click Load Driver. ASUS Z10PH-D16 6-3
  • Asus Z10PH-D16 | User Guide - Page 156
    click Next. 7. When the system finishes loading the RAID driver, replace the motherboard Support DVD with the Windows Server installation disc. Select the drive to install Windows and click Next. 8. Setup then proceeds with the OS installation. Follow screen instructions to continue. 6-4 Chapter
  • Asus Z10PH-D16 | User Guide - Page 157
    ? Yes No 4. Insert the Red Hat® Enterprise RAID driver disk to the USB floppy disk drive, select OK, then press . Insert Driver Disk Insert your driver disk into /dev/fd0 and press "OK" to continue. OK Back The drivers for the RAID card are installed to the system. ASUS Z10PH-D16 6-5
  • Asus Z10PH-D16 | User Guide - Page 158
    5. When asked if you will load additional RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 6. Follow the onscreen instructions to finish the OS installation. 7. When the installation is completed, DO NOT click Reboot.
  • Asus Z10PH-D16 | User Guide - Page 159
    the system from the Red Hat® OS installation CD. 2. Press to edit options. 3. While booting from DVD, press to give the third party driver. Enter the following command at the boot: Linux dd blacklist=isci blacklist=ahci nodmraid, then press . ASUS Z10PH-D16 6-7
  • Asus Z10PH-D16 | User Guide - Page 160
    ? Yes No 5 . You have multiple devices which could serve as source for a driver disk. Choose one you like to use and select OK, then press . Driver Disk Sou8rce You have multiple devices which could serve as source for a driver disk. Which would you like to use? sdc sdd sdb sr0 OK Cancel
  • Asus Z10PH-D16 | User Guide - Page 161
    the RAID card are installed to the system. 7. When asked if you will load additional RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 8. Follow the onscreen instructions to finish the OS installation. ASUS Z10PH-D16 6-9
  • Asus Z10PH-D16 | User Guide - Page 162
    Ensure that there is another computer with a Linux-based OS to create the RAID driver. When creating the RAID driver, you may refer to the examples below which uses a 64bit SUSE Linux system to create a 64bit RAID driver for SUSE11 sp1. 1. Copy the image file into the Linux system. Example: megasr
  • Asus Z10PH-D16 | User Guide - Page 163
    install the LSI MegaRAID controller driver when installing SUSE Linux Enterprise Server OS: 1. Boot the system from the SUSE OS installation CD. 2. Use the arrow keys to select Installation from the Boot Options menu. 3. Press , then select Yes from the menu. Press . ASUS Z10PH-D16 6-11
  • Asus Z10PH-D16 | User Guide - Page 164
    When below screen appears, select the USB floppy disk drive (sda) as the driver update medium. Select OK, then press . Please choose the Driver Update medium. sda: USB Floppy other device OK Back 6. Select Back and follow the onscreen instructions to finish the installation. 6-12 Chapter
  • Asus Z10PH-D16 | User Guide - Page 165
    the support DVD. The main screen of the Support DVD contains the following tabs: 1. Drivers 2. Utilities 3. MakeDisk 4. Manual 5. Contact The main screen of the Support DVD looks exactly the same on the Windows® Server 2008 R2 and on the Windows® Server 2012 Operating System (OS). ASUS Z10PH-D16
  • Asus Z10PH-D16 | User Guide - Page 166
    6.3.1 Drivers menu tab The Drivers Menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. 6.3.2 Utilities menu tab The Utilities menu displays the software applications and utilities that the motherboard supports.
  • Asus Z10PH-D16 | User Guide - Page 167
    RAID driver disks. Press the arrow down button in the lower part of the menu to view more items. 6.3.4 Manual menu The Manual menu provides the link to the Broadcom NetXtreme II Network Adapter user guide. You need an internet browser installed in your OS to view the User Guide. ASUS Z10PH-D16
  • Asus Z10PH-D16 | User Guide - Page 168
    6.3.5 Contact information menu The Contact menu displays the ASUS contact information, e-mail addresses, and useful links if you need more information or technical support for your motherboard. 6-16 Chapter 6: Driver installation
  • Asus Z10PH-D16 | User Guide - Page 169
    of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 3. Click the item Intel Chipset Device Software from the menu. 4. The Intel(R) Chipset Device Software window appears. Click Next to start installation. ASUS Z10PH-D16 6-17
  • Asus Z10PH-D16 | User Guide - Page 170
    and press Next to continue the installation. 7. Toggle Yes, I want to restart the computer npw and click Finish to complete the setup process. 6-18 Chapter 6: Driver installation
  • Asus Z10PH-D16 | User Guide - Page 171
    the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 4. Click Intel® I350-AM1/I350-AM2/I210/X540-BT2 Gigabit Adapters Drivers in the Drivers menu of the main screen to start the installation. 5. Click Install Drivers and Software option to begin installation. ASUS Z10PH-D16 6-19
  • Asus Z10PH-D16 | User Guide - Page 172
    Setup Options window, click Next to start the installation. By default, Intel(R) PROSet for Windows Device Manager and Windows PowerShell Module are ticked. 6-20 Chapter 6: Driver installation
  • Asus Z10PH-D16 | User Guide - Page 173
    9. Click Install to start the installation. 10. When the installation is done, press Finish to complete the installation. ASUS Z10PH-D16 6-21
  • Asus Z10PH-D16 | User Guide - Page 174
    instructions on how to install the ASPEED Video Graphics Adapter (VGA) driver. You need to manually install the ASPEED VGA driver on a Windows® operating system. To install the ASPEED VGA driver /system support DVD to the optical drive. The support DVD automatically displays the Drivers menu if
  • Asus Z10PH-D16 | User Guide - Page 175
    5. Click Install to proceed with the installation. 6. Click Finish to complete the installation. ASUS Z10PH-D16 6-23
  • Asus Z10PH-D16 | User Guide - Page 176
    6.7 Intel® Rapid Storage Technology enterprise 4.0 installation This section provides the instructions on how to install the Intel® Rapid Storage Technology enterprise 4.0 on the system. You need to manually install the Intel® Rapid Storage Technology enterprise 4.0 utility on a Windows®
  • Asus Z10PH-D16 | User Guide - Page 177
    5. Read the Warning message and click Next to continue. 6. Read the License Agreement and click Yes to continue. 7. Read the Readme File Information and click Next to continue. ASUS Z10PH-D16 6-25
  • Asus Z10PH-D16 | User Guide - Page 178
    8. After completing the installation, click Next to complete the setup process. 9. Select Yes, I want to restart my computer now and click Finish to restart your computer before using the program. 6-26 Chapter 6: Driver installation
  • Asus Z10PH-D16 | User Guide - Page 179
    Appendices Reference Information This appendix includes additional information that you may refer to when configuring the motherboard. A
  • Asus Z10PH-D16 | User Guide - Page 180
    A.1 Z10PH-D16 block diagram A-2 Appendix A: Reference information
  • Asus Z10PH-D16 | User Guide - Page 181
    11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail [email protected] Web site http://www.asus.com.tw Technical Support Telephone Online Support +886-2-2894-3447 (0800-093-456) http://support.asus.com/techserv/techserv.aspx ASUSTeK COMPUTER INC. (China) Address No.508
  • Asus Z10PH-D16 | User Guide - Page 182
    Fax +49-2102-959911 Web site http://www.asus.de Online contact http://www.asus.de/sales Technical Support Telephone +49-1805-010923 Support Fax +49-2102-959911 Online support http://support.asus.com/techserv/techserv.aspx ASUS Czech Service s.r.o. (Europe) Address Na Rovince 887, 720 00
  • Asus Z10PH-D16 | User Guide - Page 183
    Sp. z o.o. (Poland) Address Ul. Postępu 6, 02-676 Warszawa, Poland Web site http://pl.asus.com Technical Support Telephone Online Support +48-225718033 http://support.asus.com/techserv/techserv.aspx ASK-Service (Russia and CIS) Address 10 Telephone (495) 640-32-75 Web site http://ru
  • Asus Z10PH-D16 | User Guide - Page 184
    apparatus: ASUSTeK COMPUTER INC. 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Product name : Motherboard Model name : Z10PH-D16 conform with the essential requirements of the following directives: 2004/108/EC-EMC Directive EN
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
Z10PH-D16
Server Motherboard
User Guide