Asus Z11PA-U12/10G-2S Series User Manual

Asus Z11PA-U12/10G-2S Manual

Get Asus Z11PA-U12/10G-2S PDF manuals and user guides View all Asus Z11PA-U12/10G-2S manuals
Add to My Manuals
Save this manual to your list of manuals

Asus Z11PA-U12/10G-2S manual content summary:

  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 1
    Z11PA-U12 Series User Guide
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 3
    information...ix Electrical safety ix Operation safety ix Australia statement notice x How this guide is organized xi Where to find more information xi Z11PA-U12 Series specifications summary xiii Chapter 1: Product Introduction 1.1 Welcome!...1-2 1.2 Package contents 1-2 1.3 Serial number
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 4
    Using the dual function power switch 3-3 Chapter 4: BIOS Setup 4.1 Managing and updating your BIOS 4-2 4.1.1 ASUS CrashFree BIOS 3 utility 4-2 4.1.2 ASUS EzFlash Utility 4-3 4.1.3 BUPDATER utility 4-4 4.2 BIOS setup program 4-6 4.2.1 BIOS menu screen 4-7 4.2.2 Menu bar 4-7 4.2.3 Menu items
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 5
    RAID on CPU 4-26 4.7 Platform Configuration menu 4-27 4.7.1 PCH Configuration 4-27 4.7.2 Miscellaneous Configuration 4-30 4.7.3 Server ME Configuration 5-2 5.1.2 Installing Serial ATA hard disks 5-3 5.1.3 Setting the RAID item in BIOS 5-3 5.1.4 RAID configuration utilities 5-3 v
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 6
    the Support DVD 6-5 6.4 Intel® chipset device software installation 6-8 6.5 Installing the Intel® I210 Gigabit Adapters driver 6-10 6.6 Intel® Rapid Storage Technology enterprise 5.0 installation 6-13 Appendix Z11PA-U12 Series block diagram A-2 Z11PA-U12/10G-2S A-2 Z11PA-U12 A-3 Q-Code
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 7
    operation. Z11PA-U12/10G-2S This instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 8
    -U12/10G-2S: CAN ICES-3(A)/NMB-3(A) Z11PA-U12/10G-2S: CAN ICES-3(B)/NMB-3(B) REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 9
    service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals encounter technical problems with the product, contact a qualified service technician or your retailer. DO NOT throw the motherboard in municipal waste
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 10
    Consumer Law. For the latest product warranty details please visit https://www.asus.com/support. Our goods come with guarantees that cannot be excluded under the Australian . If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at https://www.asus.com/support. x
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 11
    utilities. • Chapter 6: Driver Installation This chapter provides instructions for installing the necessary drivers for different system components. • Appendix: Reference Information This appendix includes additional information that you may refer to when configuring the motherboard. Where to find
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 12
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 13
    Name Z11PA-U12/10G-2S Z11PA-U12 Processor Support / System Bus Core Logic 1 x Socket P0 (LGA 3647) 1st Gen Intel® Xeon® processor Scalable Family 2nd Gen Intel® Xeon® processor Scalable Family Intel® C622 PCH Intel® C621 PCH Form Factor ATX, 12" x 9.6" (EEB Mounting Hole Locations) ASUS
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 14
    CPU Temperature Monitoring FAN RPM Environment Z11PA-U12/10G-2S Z11PA-U12 Aspeed AST2500 64MB 1 24-pin SSI power connector + 8-pin SSI 12V Onboard ASMB9-iKVM x SFP+ - 2 x GbE LAN 1 x Mgmt LAN ASUS Control Center ASMB9-iKVM for KVM-over-Internet Operation temperature: 10°C ~ 35°C Non
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 15
    Chapter 1: Product Introduction Product Introduction This chapter describes the motherboard features and the new technologies it supports. 1
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 16
    and thank you for buying an ASUS® Z11PA-U12 Series motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard and hardware devices on it, check
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 17
    of the product, ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. Z11PA-U12 Series xxS2xxxxxxxx Made in China 合格 1.4 Special features 1.4.1 Product highlights Latest Processor Technology The motherboard supports Intel Xeon® processor scalable
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 18
    with the latest Xeon® processor scalable family, compared with the last generation, it also reduces the TDP, supports USB 3.0 with up to 14 ports for SATA and SSATA thus bringing more features and benefits to the target users. Serial ATA III technology The motherboard supports the Serial ATA III
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 19
    Chapter 2: Hardware Information Hardware Information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. 2
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 20
    2.1 Before you proceed Take note of the following precautions before you install any motherboard component or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object,
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 21
    chassis as indicated in the image below. 2.2.2 Screw holes Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis Z11PA-U12 Series 2-3
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 22
    2.2.3 Motherboard layout Z11PA-U12/10G-2S 2-4 Chapter 2: Hardware Information
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 23
    Z11PA-U12 Z11PA-U12 Series 2-5
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 24
    2.2.4 Layout contents Slots/Sockets 1. CPU socket 2. DDR4 sockets 3. PCI Express x16 / PCI Express x8 Onboard LEDs 1. Standby Power LED (SBPWR1) 2. Baseboard Management Controller LED (BMCLED1) 3. CATT LED (CATERR1) 4. Hard disk
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 25
    USB3_34) 7. Power Supply SMBus connector (5-pin PSUSMB1) 8. Serial port connector (10-1 pin COM1) 9. CPU, front, and rear fan connectors (4-pin CPU_FAN1, FRNT_FAN1-4, REAR_FAN1) 10. Hard disk activity LED connector 31 2-32 2-32 2-33 2-34 2-35 2-35 2-36 2-36 2-37 2-37 2-38 2-38 Z11PA-U12 Series 2-7
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 26
    CPU) The motherboard comes with a surface mount Socket P0 (LGA 3647) designed for the Intel® Xeon® processor product family. • Upon purchase of the motherboard after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 27
    . The CPU and heatsink assembly fits in only one correct orientation. DO NOT force the CPU and heatsink assembly into the socket to prevent damaging the CPU pins on the socket. The heatsink screws are T30 models. A torque value of 12 inch-lbf is recommended. CPU Carrier Triangle mark CPU Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 28
    2.4 System memory 2.4.1 Overview The motherboard comes with twelve (12) Double Data Rate 4 (DDR4) GB LR-DIMMs into the DIMM sockets using the memory configurations in this section. • Refer to ASUS Server AVL for the updated list of compatible DIMMs. • When installing DIMMs, always start from slot A1
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 29
    or more DIMMs, refer to the user guide bundled with the motherboard package. • Refer to the user guide for qualified vendor lists of the memory Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 30
    if your motherboard is BIOS setup. 2. Assign an IRQ to the card. Refer to the table Standard Interrupt assignments in section Interrupt assignments for more information. 3. Install the software drivers for the expansion card. When using PCIe cards on shared slots, ensure that the drivers support
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 31
    one x8 Gen3 link to CPU1. This slot supports VGA cards and various server class high performance add-on cards. 2.5.6 PCI Express x8 slot (x4 link) The onboard PCIE1 slot provides one x4 Gen3 link to CPU1 This slot supports various server class high performance add-on cards. Z11PA-U12 Series 2-13
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 32
    No. (Slot location) Short description PCI-E x16 (x16 Gen3 Link) 1 PCIE4 (Auto switch to x8 Gen3 Link if slot 3 is occupied) (support riser) 2 PCIE3 PCI-E x8 (x8 Gen3 Link) 3 PCIE2 PCI-E x16 (x16 Gen3 Link) 4 PCIE1 PCI-E x8 (x4 Gen3 Link) 2-14 Chapter 2: Hardware Information
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 33
    the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. 2. Baseboard Management Controller LED (BMCLED1) The green heartbeat LED blinks per second to indicate that the ASMB9 is working normally. Z11PA-U12 Series 2-15
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 34
    3. CATT LED (CATERR1) The CATT LED indicates that the system has experienced a fatal or catastrophic error and cannot continue to operate. 4. Hard disk activity LED (HDDLED1) This LED is for the storage devices connected to the onboard SATA, or SATA/SAS add-on card. The read or write activities of
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 35
    event log is generated. 6. Location LED (LOCLED1) This onboard LED lights up when the Location button on the server is pressed or when triggered by a system management software. The Location LED helps visually locate and quickly identify the server in error on a server rack. Z11PA-U12 Series 2-17
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 36
    a 2-digit display that shows the status of your system. • The Q-Code LEDs provide the most probable cause of an error code as a starting point for troubleshooting. The actual cause may vary from case to case. • Please refer to the Q-Code table in the Appendix section for more details. 2-18 Chapter
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 37
    cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to reenter data. DO NOT remove the cap on CLRTC1 jumper default position except when clearing the RTC RAM CMOS RTC RAM data. After the CMOS clearance, reinstall the battery. Z11PA-U12 Series 2-19
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 38
    2. VGA controller setting (3-pin VGA_SW1) This jumper allows you to enable or disable the onboard VGA controller. Set to pins 1-2 to activate the VGA feature. 3. LAN controller setting (3-pin LAN_SW1, LAN_SW2) These jumpers allow you to enable or disable the onboard LAN_SW1 or LAN_SW2. Set to pins
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 39
    mode when ME becomes corrupted. 5. DDR4 thermal event setting (3-pin DIMMTRIP1) This jumper allows you to enable or disable DDR4 DIMM thermal sensing event pin. Z11PA-U12 Series 2-21
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 40
    6. PCH_MFG1 setting (3-pin PCH_MFG1) This jumper allows you to update the BIOS ME block. 7. Smart Ride Through (SmaRT) setting (3-pin SMART_PSU1) This jumper allows you to enable or disable the Smart Ride Through (SmaRT) function. This feature
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 41
    .10.10, submask=255.255.255.0). 9. IPMI SW setting (3-pin IPMI_SW1) This jumper allows you to select which protocol in the GPU sensor to function. Z11PA-U12 Series 2-23
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 42
    10. Baseboard Management Controller setting (3-pin BMC_EN1) This jumper allows you to enable (default) or disable on-board BMC. Ensure to set this BMC jumper to enabled to avoid system fan control and hardware monitor error. 2-24 Chapter 2: Hardware Information
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 43
    to the LAN port LED indications table for more information. 6. SFP+ ports (only available for Z11PA U12/10G-2S): These ports are for connecting the enhanced small form-factor pluggable (SFP+) module that supports data rates up to 10 Gbps. 7. USB 3.0 ports 1 and 2: These two 4-pin Universal Serial
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 44
    Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection ACT/LINK SPEED LED LED SFP+_LED indications (only available for Z11PA U12/10G-2S) Activity LED Status Description OFF No activity BLINKING Data activity Status OFF AMBER GREEN Speed LED Description 1 Gbps connection 10
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 45
    the Serial ATA signal cable for Serial ATA hard disk drives. 2. Mini-SAS HD connector (ISATA1-2; ISSATA1) This motherboard comes with mini Serial Attached SCSI (SAS) HD connectors, the storage technology that supports Serial ATA. Each connector supports up to four devices. Z11PA-U12 Series 2-27
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 46
    only) and SATA interface. The M.2 (NGFF) device is purchased separately. 4. Trusted Platform Module connector (14-1 pin TPM1) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 47
    slot opening at the back of the system chassis. The USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. The USB port module is purchased separately. 6. USB 3.0 connector with USB 2.0. The USB port module is purchased separately. Z11PA-U12 Series 2-29
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 48
    devices using the SMBus interface. Power supply is required to meet PMBus specification and customized BMC FW may be needed. Please contact ASUS if your need further support. 8. Serial port connector (10-1 pin COM1) This connector is for the serial COM port. Connect the serial port module cable to
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 49
    9. CPU, front, and rear fan connectors (4-pin CPU_FAN1, FRNT_FAN1-4, REAR_FAN1) The fan connectors support cooling fans. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each add-on card causes the front panel LED to light up. Z11PA-U12 Series 2-31
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 50
    and push down firmly until the connectors completely fit. • DO NOT forget to connect the 24+8-pin power plugs when using 85W or below CPU; otherwise, the system will not boot up. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 51
    connector supports several BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. 6. Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 52
    14. Auxiliary panel connector (20-2 pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, and LAN LEDs. 1. Front panel SMB (10-2 pin FPSMB) These connectors are for the front panel SMBus cable. 2. LAN activity LED (2-pin LAN1_LED,
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 53
    signal to these leads to record a chassis intrusion event. The default setting is short CHASSIS# and GND pin by jumper cap to disable the function. Z11PA-U12 Series 2-35
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 54
    17. OCUPCIE connectors (OCUPCIE1-2) Connects the PCIE signal to the front riser card or NVME port on the backplane. 18. System Management Bus (SMBUS) connectors (5-1 pin SMBUS1; 6-1 pin SMBUS2) These connectors control the system and power management-related tasks. These connectors process the
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 55
    Storage Technology Enterprise SGPIO interface that controls the LED pattern generation, device information, and general purpose data. 20. VGA connector (16-pin VGA_HDR1) This connector supports the VGA High Dynamic-Range interface. Z11PA-U12 Series 2-37
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 56
    21. VROC_KEY connector (4-pin VROC_KEY1) This connector allows you to connect a KEY module to support Intel VMD RAID function. 22. Thermal sensor cable connector (3-pin TR1) This connector allows you to connect a Thermal sensor cable that is used for temperature
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 57
    Chapter 3: Powering Up Powering Up This chapter describes the power up sequence, and ways of shutting down the system. 3
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 58
    the power-on self-test or POST. While the tests are running, the BIOS beeps or additional messages appear on the screen. If you do not see anything . Chassis Intrusion. BIOS-image Crash Detected. 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 4.
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 59
    why you want to shut down the computer. 5. Click Continue. Using Windows® Server 2016: 1. Press +. 2. In the What do you want the BIOS setting. Pressing the power switch for more than four seconds lets the system enter the soft-off mode regardless of the BIOS setting. Z11PA-U12 Series 3-3
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 60
    3-4 Chapter 3: Powering Up
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 61
    Chapter 4: BIOS Setup BIOS Setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. 4
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 62
    disk drive in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the BUPDATER utility. 4.1.1 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 63
    2017 FS0 System Volume Information Z11PA-U12-ASUS-0204 Windows [Up/Down/Left/Right]:Switch [Enter]:Choose [q]:Exit 3. Press to switch to the Drive field. 4. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS then press . 5. Press
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 64
    the BUPDATER utility: 1. Visit the ASUS website at www.asus.com and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Download the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com to the bootable USB flash
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 65
    4. The utility verifies the file, then starts updating the BIOS file. ASUS Tek. EzFlash Utility Current Platform Platform : Z11PA-U12 Version : 0106 Build date: 06/21/2017 New Platform Platform : Z11PA-U12 Version : 0204 Build date: 07/24/2017 Start Programming Flash. DO NOT SHUTDOWN THE SYSTEM
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 66
    setup program This motherboard supports a programmable firmware chip that you can update using the provided utility described in section 4.1 Managing and updating your BIOS. Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to "Run Setup." This
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 67
    4.2.1 BIOS menu screen Menu items Menu bar Configuration fields Event Logs For changing the event log settings Server Mgmt For changing the server mgmt settings Security For changing the security settings the keyboard until the desired item is highlighted. Z11PA-U12 Series 4-7
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 68
    Performance Tuning, Advanced, Platform Configuration, Socket Configuration, Event Logs, Server Mgmt, Security, Boot, Tool, and Save & Exit) on the the bottom right corner of a menu screen are the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 69
    4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears. The Main menu provides you an overview of the basic system items. Spread Spectrum This item allows you to enable or disable spread spectrum. Configuration options: [Auto] [Enabled] [Disabled] Z11PA-U12 Series 4-9
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 70
    support may vary by version of the OS. Overclocking [Disabled] Enable this item to boost the CPU's may reduce the lifespan of the system and the CPU. Use this tool at your own risk. Power Balancer ] to dynamically adjust the frequency of all CPU cores based on the current utilization, delivering better
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 71
    of the Advanced menu items. Incorrect field values can cause the system to malfunction. 4.6.1 Trusted Computing Configuration Security Device Support [Enabled] Allows you to enable or disable the BIOS support for security device. Configuration options: [Disabled] [Enabled] Z11PA-U12 Series 4-11
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 72
    ACPI Settings Enable ACPI Auto Configuration [Disabled] Allows you to enable or disable the BIOS ACPI Auto Configuration. Configuration options: [Disabled] [Enabled] Enable Hibernation [Enabled] Allows on all HDDs during POST. Configuration options: [Disabled] [Enabled] 4-12 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 73
    , 11, 12;] 4.6.5 Serial Port Console Redirection COM1 / COM2 Console Redirection [Disabled] Allows you to enable or disable the console redirection feature. Configuration options: [Disabled] [Enabled] Z11PA-U12 Series 4-13
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 74
    -UTF8] Allows you to set the terminal type. [VT100] ASCII char set. [VT100+] Extends VT100 to support color, function keys, etc. [VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or more may require more than 1 stop bit. Configuration options: [1] [2] 4-14 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 75
    the number of rows and columns supported on the Legacy OS. Configuration ESCN] [VT400] Redirection After BIOS POST [Always Enable] This Services (EMS) Console Redirection [Disabled] Allows you to enable or disable the console redirection feature. Configuration options: [Disabled] [Enabled] Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 76
    Settings Out-of-Band Mgmt Port [COM1] Microsoft Windows Emergency Management Services (EMS) allows for remote management of a Windows Server OS through a serial port. Configuration options: [COM1] [COM2 [Software Xon/Xoff] 4.6.6 Onboard LAN Onboard I210 LAN Configuration 4-16 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 77
    [iSCSI] is selected. Onboard X722 LAN Configuration Intel X722 LAN Enable [Enabled] Allows you to enable or disable the Intel LAN. Configuration options: [Disabled] [Enabled] Z11PA-U12 Series 4-17
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 78
    event. [Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/Second will become user-configurable with set values. 4-18 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 79
    options: [Disabled] [Enabled] Maximum Payload [Auto] This option allows you to set the Maximum Payload of PCI Express Device or allow System BIOS to select the value. Configuration options: [Auto] [128 Bytes] [256 Bytes] [512 Bytes] [1024 Bytes] [2048 Bytes] [4096 Bytes] Z11PA-U12 Series 4-19
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 80
    Bytes] [2048 Bytes] [4096 Bytes] PCI Express Device Link Register Settings ASPM Support [Disabled] This option allows you to set the ASPM level. [Force L0s] Force all links to L0s State. [Auto] BIOS auto configure. [Disabled] Disables ASPM. Enabling ASPM may cause some PCI-E devices to
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 81
    options: [Disabled] [Enabled] PCI Express GEN2 Device Register Settings Target Link Speed [Auto] If supported by hardware and set to Force to X.X GT/s, for Downstream Ports, this sets an upper limit options: [Auto] [Force to 2.5 GT/s] [Force to 5.0 GT/s] [Force to 8.0 GT/s] Z11PA-U12 Series 4-21
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 82
    unstable link operation. Configuration options: [Disabled] [Enabled] Hardware Autonomous Speed [Enabled] If supported by hardware and set to Disabled, this will disable the hardware's ability to change OPROM of the PCIe slots. Configuration options: [Disabled] [Enabled] 4-22 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 83
    will not be created. Configuration options: [Disable] [Enable] Ipv6 HTTP Support [Disabled] Enables or disables the Ipv6 HTTP Boot Support. If disabled, Ipv6 PXE boot option will not be created. Configuration options or to adjust the value. The values range from 1 to 50. Z11PA-U12 Series 4-23
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 84
    : [Disabled] [Enabled] The following items appear only when you set the CSM Support to [Enabled]. GateA20 Active [Upon Request] This allows you to set the GA20 option. [Upon Request] GA20 can be disabled using BIOS services. [Always] Do not allow disabling GA20; this option is useful when any
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 85
    enable or disable the USB Mass Storage driver support. Configuration options: [Disabled] [Enabled] Mass Storage Devices Allows you to select the mass storage device emulation type for devices connected. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM] Z11PA-U12 Series 4-25
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 86
    4.6.13 iSCSI Configuration Allows you to configure the iSCSi parameters. 4.6.14 Intel(R) Virtual RAID on CPU Allows you to configure the view the RAID volumes and VMD controllers on the system. 4-26 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 87
    -E ASPM Support (Global) [L1 Only] Allows you to select ASPM support for all downstream devices. Configuration options: [Per individual port] [L1 Only] PCH DMI ASPM [Platform-POR] Allows you to configure the PCH DMI ASPM. Configuration options: [Platform-POR] [ASPM L1] [Disabled] Z11PA-U12 Series
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 88
    Disk Drive. Configuration options: [AHCI] [RAID] Support Aggressive Link Power Management [Enabled] Allows you to enable or disable the Support Aggressive Link Power (SALP) Management. Configuration options: faster enumeration. Configuration options: [Disabled] [Enabled] 4-28 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 89
    items appear only when the XHCI Manual Mode is set to [Enabled]. BIOS Write Protect. Configuration options: [Disabled] [Enabled] DCI Auto Detect Enable [Disabled] When enabled, it detects DCI being connected during BIOS POST time and enables DCI. Configuration options: [Disabled] [Enabled] Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 90
    or disable PMTT ACPI Table for DDR4 only. Configuration options: [Disabled] [Enabled] 4.7.3 Server ME Configuration Displays the Server ME Technology parameters on your system. Navigate to the second page of the screen to see back to the first item in the first page. 4-30 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 91
    system. System Errors [Enabled] This item allows you to enable or disable System Errors. Configuration options: [Disabled] [Enabled] Whea Settings Whea Support [Enabled] This item allows you to enable or disable the WHEA support. Configuration options: [Disabled] [Enabled] Z11PA-U12 Series 4-31
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 92
    -threading processor to appear as two logical processors, allowing the operating system to schedule two threads or processors simultaneously. Configuration options: [Disabled] [Enabled] 4-32 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 93
    buffer overflow attacks when combined with a supporting OS (Windows Server 2003 SP1, Windows XP SP2, SuSE support. Configuration options: [Disabled] [Enabled] AES-NI [Enabled] This Item allows you to enable or disable the AES-NI support. Configuration options: [Disabled] [Enabled] Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 94
    ] Configuration options: [Disabled] [Enabled] [Auto] Stale AtoS [Disabled] Configuration options: [Disabled] [Enabled] [Auto] LLC dead line alloc [Enabled] Configuration options: [Disabled] [Enabled] [Auto] 4-34 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 95
    ] [1-way Interleave] [2-way Interleave] [3-way Interleave] Rank Interleaving [Auto] Select different rank interleaving setting. Configuration options: [Auto] [1-way Interleave] [2-way Interleave] [4-way Interleave] [8-way Interleave] Z11PA-U12 Series 4-35
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 96
    Scrub. Configuration options: [Disabled] [Enabled] 4.8.5 IIO Configuration Socket1 Configuration This option allows you to change the settings related to the PCI Express Ports. 4-36 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 97
    Support] CPU C State Control Autonomous Core C-State [Disabled] Allows you to enable or disable Autonomous Core C-State Report. Configuration options: [Disabled] [Enabled] CPU C6 Report [Auto] Allows you to select CPU C6 Report. Configuration options: [Disabled] [Enabled] [Auto] Z11PA-U12 Series
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 98
    you to enable or disable Software Controlled T-States. Configuration options: [Disabled] [Enabled] CPU - Advanced PM Tuning Energy Perf BIAS Power Performance Tuning Configuration options: [OS Controls EPB] [BIOS Controls EPB] The following item appears only when you set Power Performance Tuning to
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 99
    ] P0 TotalTimeThreshold High The HW switching mechanism Enables the performance setting (0) when the total P0 time is greater than the threshold set. Configuration options: [0] - [99] Z11PA-U12 Series 4-39
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 100
    during reset. Configuration options: [No] [Yes, Next reset] [Yes, Every reset] 4.9.2 View Smbios Event Log Press to view all smbios event logs. 4-40 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 101
    4.10 Server Mgmt menu OS Watchdog Timer [Disabled] This item allows you to start a BIOS timer which can only be shut off by Intel Management Software after the OS loads. you to choose options for reactions to a full SEL. Configuration options: [Do Nothing] [Erase Immediately] Z11PA-U12 Series 4-41
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 102
    not modify any BMC network parameters during BIOS phase. Configuration options: [Previous State] [Static] [DynamicBmcDhcp] [DynamicBmcNonDhcp] IPV6 DM_LAN1/ Shared LAN IPV6 Support [Enabled] Allows you to enable or disable LAN1 IPV6 Support. Configuration options: [Disabled] [Enabled] 4-42 Chapter
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 103
    (by BIOS or BMC). Unspecified option will not modify any BMC network parameters during BIOS phase. Configuration options: [Previous State] [Static] [DynamicBmcDhcp] [DynamicBmcNonDhcp] 4.10.3 View System Event Log This item allows you to view the system event log records. Z11PA-U12 Series
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 104
    the administrator password, follow the same steps as in changing an administrator password, but press when prompted to create/confirm the password. 4-44 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 105
    the CSM function is disabled. Configuration options: [Disabled] [Enabled] Secure Boot Mode [Custom] Allows you to set the Secure Boot selector. Configuration options: [Custom] [Standard] Z11PA-U12 Series 4-45
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 106
    Configuration options: [Save to File] [Set New] [Append] [Erase] Authorized TimeStamps Configuration options: [Set New] [Append] OsRecovery Signatures Configuration options: [Set New] [Append] 4-46 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 107
    number of devices installed in the system. • To select the boot device during system startup, press when ASUS Logo appears. • To access Windows OS in Safe Mode, please press after POST. Network Device BBS allow you to set the booting order of the SATA devices. Z11PA-U12 Series 4-47
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 108
    an item then press to display the submenu. IPMI HWM Allows you to run the IPMI hardware monitor. Start EzFlash Allows you to run ASUS EzFlash BIOS ROM Utility when you press . Refer to the
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 109
    Save & Exit menu The Exit menu items allow you to save or discard your changes to the BIOS items. Pressing does not immediately exit this menu. Select one of the options from this the EFI Shell application (shellx64.efi) from one of the available filesystem devices. Z11PA-U12 Series 4-49
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 110
    4-50 Chapter 4: BIOS Setup
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 111
    Chapter 5: RAID Configuration RAID Configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. 5
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 112
    RAID configurations The motherboard supports Intel® Rapid Storage Technology enterprise Option ROM Utility with RAID 0, RAID 1, RAID 10, and RAID 5 support. If you want to install a Windows® operating system to a hard disk drive included in a RAID set, you have to create a RAID driver disk and load
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 113
    motherboard supports changes and exit the BIOS Setup. Refer to Chapter 4 for details on entering and navigating through the BIOS Setup. 5.1.4 RAID configuration supported by the Intel® C620 chipset. Refer to the succeeding section for details on how to use the RAID configuration utility. Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 114
    Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. Before you proceed, ensure that you have installed the ATA hard disks, and Setting the RAID item in BIOS sections in this manual for more information. To launch the Intel® Rapid Storage
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 115
    the selection bar then press to select a disk. A small triangle before the Port number marks the selected drive. Press when you are done. Z11PA-U12 Series 5-5
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 116
    from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. 7. In the Capacity field item, key in the
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 117
    VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) Are you sure you want to delete volume "Volume0"? (Y/N): Z11PA-U12 Series 5-7
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 118
    5.2.3 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set: 1. From the utility main menu, select 3. Reset Disks to Non-RAID and press <
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 119
    Model Serial # Size X XXXXXXXXXXX XXXXXXXX XXX.GB [ ]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. Z11PA-U12 Series 5-9
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 120
    3. The utility immediately starts rebuilding after the disk is selected. When done, the status of the degraded RAID volume is changed to "Rebuild". Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023 Copyright(C) 2003-12 Intel Corporation. All Rights Reserved. [ MAIN MENU ]
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 121
    bootable to boot from the hard disk. 1. Reboot the system and press to enter the BIOS setup utility during POST. 2. Go to the Boot menu and select the boot option priority. 3. , then press . 5. When the confirmation window appears, select Yes, then press . Z11PA-U12 Series 5-11
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 122
    disk drives that are connected to the Serial ATA connectors supported by the Southbridge. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 6. To enter the Intel® Rapid Storage
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 123
    data on one of the selected disks, select NO when prompted. • If you want to Enable volume write-back cache or Initialize volume, click Advanced. Z11PA-U12 Series 5-13
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 124
    6. Confirm the volume creation, than click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. 7. Wait until the process is completed, then click OK when prompted. You still need to
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 125
    values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. Z11PA-U12 Series 5-15
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 126
    5.3.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives.Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: 1. From the utility main menu, select the volume (exp. Volume_0000) in Volumes
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 127
    , or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors Z11PA-U12 Series 5-17
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 128
    OS drive installation. • Purchase ASUS proprietary PCIE-NVME4-OCULINK riser card, and install it to the PCIE4 slot only. When this configuration is chosen, do not install any other extension card to the PCIE3 slot. To enter the Intel® Virtual Raid on CPU in BIOS: 1. Enter the BIOS Setup during POST
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 129
    a RAID set: 1. From the Intel® Virtual Raid on CPU menu, select Create RAID Volume and press . The following 64 KB We recommend a lower strip size for server systems, and a higher strip size for multimedia computer systems used mainly for audio and video editing. Z11PA-U12 Series 5-19
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 130
    7. When the Capacity (MB) item is selected, enter the RAID volume capacity that you want and press . The default value indicates the maximum allowed capacity. 8. When the Create Volume item is selected, press to create the RAID volume and return to the Intel® Rapid Storage Technology
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 131
    Raid on CPU menu, select the RAID volume you want to delete and press . The following screen appears: 2. When the Delete item is selected, press , then select Yes to delete the RAID volume and return to the Intel® Virtual Raid on CPU menu, or select No to cancel. Z11PA-U12 Series
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 132
    on how to install the RAID controller drivers during OS installation. To install the RAID controller driver when installing Windows® 10 OS: 1. Boot the computer using the Windows® 10 OS installation disc. Follow the screen instructions to start installing Windows® 10. 2. When prompted to
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 133
    . 7. When the system finishes loading the RAID driver, replace the motherboard Support DVD with the Windows Server installation disc. Select the drive to install Windows and click Next. 8. Setup then proceeds with the OS installation. Follow screen instructions to continue. Z11PA-U12 Series 5-23
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 134
    5-24 Chapter 5: RAID Configuration
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 135
    Chapter 6: Driver Installation Driver Installation This chapter provides the instructions for installing the necessary drivers for different system components in the Windows® Operating Systems. 6
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 136
    ® Server OS, you can load the RAID driver from a USB flash drive. You can create a USB flash drive with RAID driver in Windows by copying the files from the support DVD to the USB flash drive. To copy the RAID driver to a USB flash drive in Windows environment: 1. Place the motherboard support DVD
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 137
    a USB flash drive containing the RAID controller driver. Click Browse to continue. 5. Locate the driver in the corresponding folder of the Support DVD or USB flash drive and then click OK to continue. 6. Select the RAID controller driver you need from the list and click Next. Z11PA-U12 Series 6-3
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 138
    finishes loading the RAID driver, • Replace the motherboard Support DVD with the Windows Server installation disc. • Remove the USB flash drive. Select the drive to install Windows and click Next. 8. Setup then proceeds with the OS installation. Follow screen instructions to continue. 6-4 Chapter
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 139
    to run the support DVD. The main screen of the Support DVD contains the following tabs: 1. Drivers 2. Utilities 3. Manual 4. Contact The main screen of the Support DVD looks exactly the same on the Windows® Server 2012 R2 and on the Windows® Server 2016 Operating System (OS). Z11PA-U12 Series 6-5
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 140
    The Drivers Menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. 6.3.2 Utilities menu tab The Utilities menu displays the software applications and utilities that the motherboard supports. 6-6 Chapter 6: Driver
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 141
    user guide. You need an internet browser installed in your OS to view the User Guide. 6.3.4 Contact information menu The Contact menu displays the ASUS contact information, e-mail addresses, and useful links if you need more information or technical support for your motherboard. Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 142
    section provides the instructions on how to install the Intel® chipset device software on the system. You need to manually install the Intel® privileges. 2. Insert the motherboard/system support DVD into the optical drive. The support DVD automatically displays the Drivers menu if Autorun is enabled
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 143
    5. Read the License Agreement and click Accept to continue the process. 6. Read the Readme File Information and click Install to start the installation process. 7. Click Restart Now to complete the setup process. Z11PA-U12 Series 6-9
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 144
    provides the instructions on how to install the Intel® I210 Gigabits Adapter Driver on the system. To install the Intel® I210 Gigabit Adapters Driver on the Windows® operating system: 1. Restart the computer. 2. Log on with Administrator privileges. 3. Insert the motherboard/system support DVD to
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 145
    . 8. From the Setup Options window, click Next to start the installation. By default, Intel(R) PROSet for Windows Device Manager and Windows PowerShell Module are ticked. Z11PA-U12 Series 6-11
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 146
    9. Click Install to start the installation. 10. When the installation is done, press Finish to complete the installation. 6-12 Chapter 6: Driver Installation
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 147
    the motherboard/system support DVD into the optical drive, and navigate to the Utilities menu. 3. Click the Intel® Rapid Storage Technology enterprise to begin installation. 4. The Intel® Rapid Storage Technology enterprise window appears. Click Next to start the installation. Z11PA-U12 Series
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 148
    5. Read the Warning message and click Next to continue. 6. Read the License Agreement and click Accept to continue the process. 7. Select the destination folder and click Next to continue. 6-14 Chapter 6: Driver Installation
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 149
    8. Tick the features that you would like to install and click Next to continue. 9. Click Install to start the installation process. 10. Click Restart Now to complete the setup process. Z11PA-U12 Series 6-15
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 150
    6-16 Chapter 6: Driver Installation
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 151
    Appendix Appendix This appendix includes additional information that you may refer to when configuring the motherboard. A
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 152
    Z11PA-U12 Series block diagram Z11PA-U12/10G-2S A-2 Appendix
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 153
    Z11PA-U12 Z11PA-U12 Series A-3
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 154
    Progress DESCRIPTION First post code(POWER_ON_POST_CODE) Load BSP microcode(MICROCODE_POST_CODE) Set cache as ram for PEI phase(CACHE_ENABLED_POST_CODE) CPU Early init.(CPU_EARLY_INIT_POST_CODE) initializes South bridge for PEI preparation PEI Core Entry NB initialize before installed memory SB
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 155
    Init. SB run-time init. DXE CPU Init NB Init. NB Init. NB Init USB Driver Init. AMI USB Driver Init. AMI USB Driver Init. AMI USB Driver Init BIOS Setup Utility password verify BIOS Setup Utility start BIOS Setup Utility input wait Ready to boot event Legacy boot event APIC mode PIC mode Z11PA-U12
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 156
    con le direttive correlate. Il testo completo della dichiarazione di conformità UE è disponibile all'indirizzo: www.asus.com/support ASUS www.asus.com/support ASUSTeK Computer Inc www.asus.com/support Hrvatski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim zahtjevima
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 157
    District, Shanghai, China Telephone +86-21-5442-1616 Fax +86-21-5442-0099 Web site https://www.asus.com.cn Technical Support Telephone Online Support +86-20-2804-7506 (400-620-6655) https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=zh-cn Z11PA-U12 Series A-7
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 158
    Fax +1-510-608-4555 Web site https://www.asus.com/us/ Technical Support Support fax General support Online support +1-812-284-0883 +1-812-282-2787 https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=en-us ASUS COMPUTER GmbH (Germany and Austria) Address Fax
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 159
    -pl ASK-Service (Russia and CIS) Address 10 Telephone (495) 640-32-75 Web site https://www.asus.com/ru/ Technical Support Telephone 008-800-100-ASUS (008-800-100-2787) Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=ru-ru Z11PA-U12 Series
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 160
    Section 2.1077 Responsible Party: Address: Phone/Fax No: Asus Computer International 48720 Kato Rd, Fremont, CA 94538 (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : Z11PA-U12/10G-2S compliance statement: This device complies with part 15 of
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 161
    Part 2 Section 2.1077 Responsible Party: Address: Phone/Fax No: Asus Computer International 48720 Kato Rd, Fremont, CA 94538 (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : Z11PA-U12 compliance statement: This device complies with part 15 of
  • Asus Z11PA-U12/10G-2S | Series User Manual - Page 162
    A-12 Appendix
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
Z11PA-U12 Series
User Guide