Asus Z97-PRO User Guide

Asus Z97-PRO Manual

Get Asus Z97-PRO PDF manuals and user guides View all Asus Z97-PRO manuals
Add to My Manuals
Save this manual to your list of manuals

Asus Z97-PRO manual content summary:

  • Asus Z97-PRO | User Guide - Page 1
    Motherboard Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 2
    COMPUTER INC. All Rights Reserved. No part of this manual COMPUTER INC. ("ASUS"). Product warranty or service will ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL by downloading it from http://support.asus.com/download or any problems in
  • Asus Z97-PRO | User Guide - Page 3
    assembly installation 2-4 2.1.4 DIMM installation 2-6 2.1.5 ATX Power connection 2-7 2.1.6 SATA device connection 2-8 2.1.7 Front I/O Connector 2-9 2.1.8 Expansion Card installation 2-10 2.1.9 Wi-Fi antenna installation (Optional 2-11 2.2 BIOS update utility 2-12 2.3 Motherboard rear
  • Asus Z97-PRO | User Guide - Page 4
    Update 3-62 3.11.2 ASUS EZ Flash 2 3-63 3.11.3 ASUS CrashFree BIOS 3 3-64 3.11.4 ASUS BIOS Updater 3-65 Chapter 4: Software support 4.1 Installing an operating system 4-1 4.2 Support DVD information 4-1 4.2.1 Running the support DVD 4-1 4.2.2 Obtaining the software manuals 4-3 iv
  • Asus Z97-PRO | User Guide - Page 5
    EZ Update 4-9 4.4.4 USB BIOS Flashback 4-11 4.4.5 USB Charger 4-13 4.4.6 Push Notice 4-14 4.4.7 System Information 4-17 4.5 Audio configurations 4-18 Chapter 5: RAID support 5.1 RAID configurations 5-1 5.1.1 RAID definitions 5-1 5.1.2 Installing Serial ATA hard disks 5-2 5.1.3 Setting
  • Asus Z97-PRO | User Guide - Page 6
    supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. • Before using the product, ensure all cables are
  • Asus Z97-PRO | User Guide - Page 7
    the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: 1. Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the
  • Asus Z97-PRO | User Guide - Page 8
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus Z97-PRO | User Guide - Page 9
    Z97-PRO specifications summary LGA1150 socket for the 4th Generation and New 4th Generation Intel® Core™ i7/Intel® Core™ i5/ Intel® Core™ i3, Pentium® and Celeron® processors CPU Supports 22nm CPU Supports Intel® Turbo Boost Technology 2.0* Chipset Memory * The Intel® Turbo Boost Technology
  • Asus Z97-PRO | User Guide - Page 10
    These SATA ports are for data hard drives only. ATAPI devices are not supported. Gigabit Intel® LAN connection-802.3az Energy Efficient Ethernet (EEE) appliance - Intel® I218-V Gigabit LAN - Dual interconnect between the integrated Media Access Controller (MAC) and physical layer (PHY) Speedy Wi-Fi
  • Asus Z97-PRO | User Guide - Page 11
    Z97-PRO specifications summary USB ASUS Exclusive Features Intel® Z97 Express Chipset - supports ASUS USB 3.0 Boost - 6 x USB 3.0/2.0 ports (4 ports at mid-board, 2 ports at rear panel, blue) - 6 x USB 2.0/1.1 ports (4 ports at mid-board, 2 ports at rear panel) ASMedia® USB 3.0 controller -
  • Asus Z97-PRO | User Guide - Page 12
    usage scenarios. Steam support - Compatible with the most fun gaming platform under Windows® system ASUS EZ DIY Push Notice - Monitor your PC status with smart devices in real time USB BIOS Flashback - with USB BIOS Flashback Wizard for EZ BIOS download scheduling UEFI BIOS EZ Mode - featuring
  • Asus Z97-PRO | User Guide - Page 13
    x HDMI port 1 x DVI-D 1 x RGB 1 x ASUS Wi-Fi GO! module (Wi-Fi 802.11 a/b/g/n/ac and Bluetooth v 4.0) (Optional) 1 x Optical S/PDIF Out port 1 x LAN (RJ45) port 4 x USB 3.0/2.0 ports (blue, bottom port of USB3_56 supports USB BIOS Flashback) 2 x USB 2.0/1.1 ports 8-channel Audio I/O ports (continued
  • Asus Z97-PRO | User Guide - Page 14
    Operating system support Form factor * The CPU Q-Fan control setting is set as default in Auto mode for detecting the type of CPU fan installed and switches to the control mode automatically. 64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0, Multi-language BIOS, ASUS EZ
  • Asus Z97-PRO | User Guide - Page 15
    for the following items ASUS Z97-PRO motherboard 4 x Serial ATA 6 Gb/s cables 1 x ASUS Q-Shield Support DVD 1 x ASUS SLI™ bridge connector User Manual User manual 1 x 2T2R dual-band Wi-Fi moving antennas (Wi-Fi 802.11a/b/g/n/ac compliant) (Optional) 1 x 2-in-1 ASUS Q-Connector kit • If any
  • Asus Z97-PRO | User Guide - Page 16
    Intel® LGA1150 compatible CPU Fan Intel® LGA1150 CPU PC chassis SATA hard disk drive Philips (cross) screwdriver Power supply unit 1 bag of screws DIMM SATA optical disc drive (optional) Graphics card The tools and components in the table above are not included in the motherboard package
  • Asus Z97-PRO | User Guide - Page 17
    clarity, detail, and realism. SATA Express support SATA Express provides faster data transfer speeds of up to 10 Gb/s, allowing your system to catch up with the speed of the SSDs. It also features backward compatibility with up to two SATA drives of the same speed. Chapter 1 ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 18
    than USB 2.0. Extra SATA 6 Gb/s support The Intel® Z97 Express chpset natively supports Serial ATA (SATA) interface, delivering up to 6 Gb/s of data transfer. This motherboard features an extra 6 Gb/s ports for an enchanced scalability, faster data retrieval, and double bandwidth of current bus
  • Asus Z97-PRO | User Guide - Page 19
    came with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Chapter 1 ASUS Z97-PRO Series 1-3
  • Asus Z97-PRO | User Guide - Page 20
    1.2.2 Motherboard layout Chapter 1 Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. 1-4 Chapter 1: Product introduction
  • Asus Z97-PRO | User Guide - Page 21
    1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 2. LGA1150 CPU socket 3. CPU, CPU optional, and chassis fan connectors (4-pin CPU_FAN, 4-pin CPU_OPT, 4-pin CHA_FAN1-4 ) 4. DDR3 DIMM slots 5. CPU Over Voltage jumper (3-pin CPU_OV) 6. MemOK! button 7. EZ XMP switch 8. USB 3.0 connectors
  • Asus Z97-PRO | User Guide - Page 22
    the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1150 socket. • The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect
  • Asus Z97-PRO | User Guide - Page 23
    System memory The motherboard comes with eight DDR 3 (Double Data Rate 3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 1 ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 24
    According to Intel® CPU spec, DIMM voltage below 1.65 V is recommended to protect the CPU. • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. • Due to the memory address limitation on 32-bit Windows® OS, when
  • Asus Z97-PRO | User Guide - Page 25
    Z97-PRO Motherboard Qualified Vendors Lists (QVL) DDR3 3200 (O.C.) MHz capability Vendors Part No. Size SS/DS Chip Brand Chip support (Optional) 1 2 4 1.65V • • • 1.65V • • • 1.65V • • • 1.65V • • • 1.65V • • • 1.65V • • • 1.65V • • • Chapter 1 ASUS Z97-PRO Series 1-9
  • Asus Z97-PRO | User Guide - Page 26
    • 1.65V • • • 1.65V • • • DDR3 2666 (O.C.) MHz capability Vendors Part No. Size SS/ DS Apacer 78.BAGFF.AFC0C(XMP) 8GB DS (2x4GB) Apacer 78 (2x4GB) Chip Chip Timing Brand NO. - - 12-13-13-35 Voltage DIMM socket support (Optional) 1 24 - • •• - - 12-13-13-35 - • •• -
  • Asus Z97-PRO | User Guide - Page 27
    support (Optional) 1 2 4 • • • * The above QVL is for the DDR3 2500 MHz memory module. Due to CPU behavior, DDR3 2500 MHz memory module will run at DDR3 2400 MHz frequency. DDR3 2400 (O.C.) MHz capability Vendors Part • • • - • • • 1.6 • • • Chapter 1 ASUS Z97-PRO Series 1-11
  • Asus Z97-PRO | User Guide - Page 28
    DDR3 2200 (O.C.) MHz capability Vendors Part No. Size G.SKILL F3-17600CL7D-4GBFLS(XMP) 4G ( 2x 2G ) SS/ Chip Chip DS Brand NO. DS - - Timing 7-10-10-28 Voltage 1.65 DIMM socket support (Optional) 1 24 • • GEIL GET34GB2200C9DC(XMP) 4GB ( 2x 2GB ) DS - - 9-10-9-28 1.65 • •• GEIL
  • Asus Z97-PRO | User Guide - Page 29
    Vendors Part No - DS - - DS - - SS - - DS - - Timing 1866 9-9-9-27 Voltage DIMM socket support (Optional) 12 4 1.5 • • 9-10-9-27 1.5 • • • 9-10-9-27 1.5 • • 65 • • • - 1.65 • • • 1866-9-11-9-27 - • • • 1866-9-11-9-27 - • • • Chapter 1 ASUS Z97-PRO Series 1-13
  • Asus Z97-PRO | User Guide - Page 30
    DDR3 1600 MHz capability Vendors Part No. Size SS/ DS A-DATA AD3U1600W4G11 4GB SS A-DATA - Timing 11-11-11-28 11-11-11-28 9-9-9-24 9-9-9-24 9-9-9-24 Voltage DIMM socket support (Optional) 124 - • • • - • • • - • • • - • • • 1.5 • • • - 9-9-9-24 1.5 • • •
  • Asus Z97-PRO | User Guide - Page 31
    capability Vendors Part No. 4GB DS Chip Brand Chip NO. - - Timing 8-8-8-24 Voltage DIMM socket support (Optional) 1 24 1.5 • •• - - - - 1600-9-9- 1.5 9- -GN-F 1600 - Hynix H5TQ2G83BFRPBC - 1.5 • •• • •• (continued on the next page) Chapter 1 ASUS Z97-PRO Series 1-15
  • Asus Z97-PRO | User Guide - Page 32
    DDR3 1600 MHz capability Vendors Part No. Size SS/ Chip DS Brand Chip NO. Timing Voltage DIMM socket support (Optional) 1 24 SanMax SMD- Asint Asint BUFFALO BUFFALO BUFFALO CORSAIR CORSAIR CORSAIR CORSAIR CORSAIR CORSAIR Part No. Size SS/ Chip Chip NO. DS Brand AE32G1339U1-U 2GB
  • Asus Z97-PRO | User Guide - Page 33
    . • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. Chapter 1 ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 34
    Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 1 Slot No. 1 2 3 4 5 6 7 Slot Description PCIe 2.0 x1_1 slot PCIe 3.0/2.0 x16_1 slot PCIe 2.0 x1_2 slot PCIe 2.0 x1_3 slot PCIe 3.0/2.0 x16_2
  • Asus Z97-PRO | User Guide - Page 35
    motherboard PCIe x16_1 PCIe x16_2 PCIe x16_3 PCIe x1_1 PCIe x1_2 PCIe x1_3 PCIe x1_4 SMBUS Controller Wi-Fi/Bluetooth 4.0 (Optional) Intel® SATA Controller Intel® LAN1 (i218) ASMedia SATA Controller - - - - - - - - - - shared - - shared - - - - - Chapter 1 ASUS Z97-PRO Series 1-19
  • Asus Z97-PRO | User Guide - Page 36
    This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on button The motherboard comes with a power-on removing or installing any motherboard component. Chapter 1 2. EZ XMP switch Enable this switch to overclock the installed DIMMs,
  • Asus Z97-PRO | User Guide - Page 37
    and load the BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from www.asus.com after using the MemOK! function. ASUS Z97-PRO Series 1-21 Chapter
  • Asus Z97-PRO | User Guide - Page 38
    under Windows® OS environment, the TPU function will be activated after the next system bootup. • You may use the 5-Way Optimization and TPU feature in the AI Suite 3 application, adjust the BIOS setup program or enable the TPU switch at the same time. However, the system will use the last setting
  • Asus Z97-PRO | User Guide - Page 39
    , the EPU function will be activated after the next system bootup. • You may change the EPU settings in the software application or BIOS setup program and enable the EPU function at the same time. However, the system will use the last setting you have made. Chapter 1 ASUS Z97-PRO Series 1-23
  • Asus Z97-PRO | User Guide - Page 40
    the CMOS memory of date Turn OFF the computer and unplug the overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values. • Due to the chipset behavior, AC
  • Asus Z97-PRO | User Guide - Page 41
    allows you to set a higher CPU voltage for a flexible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage setting, insert the jumper to pins 1-2. Chapter 1 ASUS Z97-PRO Series 1-25
  • Asus Z97-PRO | User Guide - Page 42
    State LEDs provide the status of these key components during POST (Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component's LED stays lit up until the problem is solved. 2. TPU LED (TPU_LED) The TPU LED lights up when the TPU switch
  • Asus Z97-PRO | User Guide - Page 43
    3. EPU LED (OLED2) The EPU LED lights up when the EPU switch is enabled. 4. USB BIOS Flashback LED (FLBK_LED) The BIOS Flashback LED flashes when you press the BIOS Flashback button for BIOS update. Chapter 1 ASUS Z97-PRO Series 1-27
  • Asus Z97-PRO | User Guide - Page 44
    LED (XLED1) This LED lights up when you enable the EZ XMP switch is enabled. 6. Q-Code LEDs The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the next page for details. Chapter 1 1-28 Chapter 1: Product introduction
  • Asus Z97-PRO | User Guide - Page 45
    Memory initialization error. Invalid memory type or incompatible memory speed Unspecified memory initialization error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed Internal CPU
  • Asus Z97-PRO | User Guide - Page 46
    Driver connecting is started PCI Bus initialization is started PCI Bus Hot Plug Controller Initialization PCI Bus Enumeration PCI Bus Request Resources PCI Bus Assign Resources Console Output devices connect Console input devices connect Super IO Initialization USB initialization is started USB
  • Asus Z97-PRO | User Guide - Page 47
    Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset USB hot plug PCI bus hot plug Clean-up of NVRAM Configuration Reset (reset of NVRAM settings) Reserved for future AMI codes CPU initialization error System
  • Asus Z97-PRO | User Guide - Page 48
    ACPI/ASL Checkpoints (under OS) Code 03 04 05 30 40 AC AA Description System is entering S3 sleep state System is entering S4 sleep state waking up from the S4 sleep state System has transitioned into ACPI mode. Interrupt controller is in PIC mode. System has transitioned into ACPI mode. Interrupt
  • Asus Z97-PRO | User Guide - Page 49
    connected to these connectors and set a higher priority to SATAEXPRESS than M.2 Socket 3 interface. Refer to section 3.6.4 PCH Storage Configuration of this user guide for more details. • The SATAEXPRESS connector can support one SATA Express device or two SATA devices. ASUS Z97-PRO Series 1-33
  • Asus Z97-PRO | User Guide - Page 50
    Gb/s signal cables. • ASMedia storage controller can only support AHCI mode. • These SATA ports are for data drives only. 3. M.2 socket 3 This socket allows you to install an M.2 (NGFF) SSD module. • This socket supports M Key and type 2260/2280 storage devices. • The M.2 Socket 3 shares bandwidth
  • Asus Z97-PRO | User Guide - Page 51
    connector, then install the module supports either HD Audio or legacy AC` motherboard's high-definition audio capability. • If you want to connect a high-definition or an AC'97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97]. ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 52
    recommend you to install the related driver to fully use the USB 3.0 ports under Windows® 7. • The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the operating system's setting. • These USB 3.0 ports support native UASP transfer standard in Windows® 8 / Windows® 8.1 and Turbo Mode
  • Asus Z97-PRO | User Guide - Page 53
    so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased separately. Chapter 1 ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 54
    ASUS FAN Xpert 3 feature. • The CPU fan connector detects the type of CPU fan installed and automatically switches the control modes. To configure the CPU fan's control mode, go to Advanced Mode > Monitor > CPU Q-Fan Control item in BIOS. • The chassis fan connectors support DC and PWM modes. To set
  • Asus Z97-PRO | User Guide - Page 55
    unit (PSU) that complies with ATX 12 V Specification 2.0 (or will not boot. • We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 56
    supports several system is in sleep mode. • Hard disk drive activity LED (2-pin HDD_LED) This 2-pin connector to hear system beeps and warnings. • ATX power button/soft-off button (2-pin PWRSW soft-off mode depending on the operating system settings. Pressing the power switch for more than four
  • Asus Z97-PRO | User Guide - Page 57
    the button cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the extra button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details. ASUS Z97-PRO Series 1-41
  • Asus Z97-PRO | User Guide - Page 58
    Thunderbolt I/O card that supports Intel's Thunderbolt Technology, allowing you to connect up to six Thunderbolt-enabled devices and a DisplayPort-enabled you to monitor the temperature of your motherboard's critical components and connected devices. The thermistor cable is purchased separately.
  • Asus Z97-PRO | User Guide - Page 59
    may vary with models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. Chapter 2 ASUS Z97-PRO Series 2-1
  • Asus Z97-PRO | User Guide - Page 60
    3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. 2-2 Chapter 2: Basic installation
  • Asus Z97-PRO | User Guide - Page 61
    2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA155 and LGA1156 sockets on the LGA1150 socket. Chapter 2 ASUS Z97-PRO Series 2-3
  • Asus Z97-PRO | User Guide - Page 62
    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly Chapter 2 2-4 Chapter 2: Basic installation
  • Asus Z97-PRO | User Guide - Page 63
    To uninstall the CPU heatsink and fan assembly Chapter 2 ASUS Z97-PRO Series 2-5
  • Asus Z97-PRO | User Guide - Page 64
    2.1.4 DIMM installation Chapter 2 To remove a DIMM 2-6 Chapter 2: Basic installation
  • Asus Z97-PRO | User Guide - Page 65
    2.1.5 ATX Power connection OR OR ASUS Z97-PRO Series 2-7 Chapter 2
  • Asus Z97-PRO | User Guide - Page 66
    2.1.6 SATA device connection OR OR Chapter 2 2-8 Chapter 2: Basic installation
  • Asus Z97-PRO | User Guide - Page 67
    2.1.7 Front I/O Connector To install ASUS Q-Connector HDD LED HDD LED+ HDD LED- HDD LED PWR Ground Reset Ground POWER SW RESET SW To install USB 2.0 connector To install front panel audio connector Chapter 2 USB 2.0 To install USB 3.0 connector USB 3.0 ASUS Z97-PRO Series AAFP 2-9
  • Asus Z97-PRO | User Guide - Page 68
    2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2 2-10 Chapter 2: Basic installation
  • Asus Z97-PRO | User Guide - Page 69
    installed to the Wi-Fi ports. • Ensure to install the Bluetooth driver before installing the Wi-Fi GO! software. The illustration above is for reference only. The I/O port layout may vary with models, but the Wi-Fi antenna installation procedure is the same for all models. Chapter 2 ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 70
    compatibility and stability. • Refer to section 2.3.1 Rear I/O connection for the location of the USB port that supports USB BIOS Flashback. 3. Launch the USB BIOS Flashback Wizard to automatically download the latest BIOS version. 4. Shut down your computer. 5. On your motherboard, press the BIOS
  • Asus Z97-PRO | User Guide - Page 71
    format error. If this scenario happens, please restart the system to turn off the light. • Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system's failure to boot up, please contact your local ASUS Service Center. Chapter 2 ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 72
    5. Intel® LAN (RJ-45) port** 6. USB 2.0 ports 910 7. USB 3.0 ports E12, support ASUS USB 3.0 Boost Turbo Mode. 8. Wi-Fi 802.11 a/b/g/n/ac Bluetooth V4.0 + HS* (Optional) 9. DisplayPort 10. DVI port 11. USB 3.0 ports 56, bottom port supports USB BIOS Flashback and USB Charger+. 12. Audio I/O ports
  • Asus Z97-PRO | User Guide - Page 73
    chipset, all USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. • Multi-VGA output supports up to three displays under Windows® OS environment, two displays under BIOS, and one
  • Asus Z97-PRO | User Guide - Page 74
    Speaker Out* 8-channel Line In Front Speaker Out Mic In Center/Subwoofer Rear Speaker Out Side Speaker Out * If you are using Windows 8.1 platform, use only the gray audio port for Rear Speaker Out in a 6-channel configuration. 2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone
  • Asus Z97-PRO | User Guide - Page 75
    Connect to 2.1 channel Speakers Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Chapter 2 If you are using Windows 8.1 platform, use only the gray audio port for Side Speaker Out in a 6-channel configuration. ASUS Z97-PRO Series 2-17
  • Asus Z97-PRO | User Guide - Page 76
    ATX power button. If your monitor complies with the "green" standards or if it has a "power standby" feature, the monitor LED may light up or change from orange to green after the system LED turns on. The system then runs the power-on self tests (POST). While the tests are running, the BIOS
  • Asus Z97-PRO | User Guide - Page 77
    is ON, press the power button for less than four seconds to put the system on sleep mode or soft-off mode, depending on the BIOS setting. Press the power switch for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. Chapter 2 ASUS Z97-PRO Series 2-19
  • Asus Z97-PRO | User Guide - Page 78
    Chapter 2 2-20 Chapter 2: Basic installation
  • Asus Z97-PRO | User Guide - Page 79
    update. Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. When downloading or updating the BIOS file, rename it as Z97P.CAP for this motherboard. Chapter 3 ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 80
    you see on your screen. • Ensure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program. • If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load
  • Asus Z97-PRO | User Guide - Page 81
    to manually tune the fans Loads optimized default settings Shows the bootable devices Saves the changes and resets the system Displays the Advanced mode menus Selects the boot device priority The boot device options vary depending on the devices you installed to the system. ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 82
    control MyFavorite Language Menu bar EZ Tuning Wizard Quick Note Hot Keys Chapter 3 Sub-menu item Menu items Item description Configuration fields Scroll bar Last modified settings Goes back to EZ Mode Displays the CPU/motherboard temperature, CPU and memory voltage output 3-4 Chapter 3: BIOS
  • Asus Z97-PRO | User Guide - Page 83
    Wizard (F11) This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard's SATA mode from AHCI to RAID mode. Refer to section 3.2.4 EZ Tuning Wizard for more information. Chapter 3 ASUS Z97-PRO Series 3-5
  • Asus Z97-PRO | User Guide - Page 84
    that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: BIOS setup program. Use the navigation keys to select items in the menu and change the settings to capture the BIOS screen and save it to the removable storage device. Configuration fields These
  • Asus Z97-PRO | User Guide - Page 85
    be configured Click to activate PWM Mode Click to activate DC Mode Chapter 3 Select a profile to apply to your fans Click to apply the fan setting Click to undo the changes Click to go back to main menu Select to manually configure your fans ASUS Z97-PRO Series 3-7
  • Asus Z97-PRO | User Guide - Page 86
    configure your fans' operating speed. Speed points Click or tap to manually configure your fans To configure your fans: 1. Select the fan that you want to configure and the fans' operating speed. 3. Click Apply to save the changes then click Exit (ESC). 3-8 Chapter 3: BIOS setup Chapter 3
  • Asus Z97-PRO | User Guide - Page 87
    the CPU fan type (Box cooler, Tower cooler, or Water cooler) that you installed then click Next. If you are not sure of the CPU fan type, click I'm not sure. The system automatically detects the CPU fan type. 4. Click Next then click Yes to confirm auto-tuning. ASUS Z97-PRO Series 3-9 Chapter
  • Asus Z97-PRO | User Guide - Page 88
    your keyboard or click EZ Tuning Wizard screen. 2. Click RAID then click Next. from the BIOS screen to open • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel® SATA connectors. 3. Select the type of storage for your RAID Easy Backup or Super Speed, then
  • Asus Z97-PRO | User Guide - Page 89
    3.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 ASUS Z97-PRO Series 3-11
  • Asus Z97-PRO | User Guide - Page 90
    click Setup Tree Map screen. from the BIOS screen to open 2. On the Setup Tree Map screen, select the BIOS items that you want to save in • User-managed items such as language and boot order • Configuration items such as Memory SPD Information, system time and date. 4. Click Exit (ESC) or press <
  • Asus Z97-PRO | User Guide - Page 91
    the BIOS password. See section 1.2.7 Jumpers for information on how to erase the RTC RAM via the Clear CMOS button. • The Administrator or User Password items on top of the screen show the default [Not Installed]. After you set a password, these items show [Installed]. ASUS Z97-PRO Series 3-13
  • Asus Z97-PRO | User Guide - Page 92
    able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item top of the screen shows the default Not Installed. After you set a password, this item shows Installed. To set a user password: 1. Select the User Password
  • Asus Z97-PRO | User Guide - Page 93
    the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display other BIOS items. Chapter 3 ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 94
    settings for the system. [Manual] Automatically optimizes the CPU ratio and BCLK frequency. [XMP] When the XMP(extreme memory profile) mode is selected, the BCLK frequency and memory parameters will be optimized automatically. If you install memory modules supporting the XMP(extreme memory
  • Asus Z97-PRO | User Guide - Page 95
    the CPU default Turbo Ratio setting or manually assign CPU installed. Max. CPU Cache Ratio [Auto] This item allows you to set the maximum possible ratio on the Uncore part of the processor. Use the or keys to adjust the value. The values depend on the CPU installed. Chapter 3 ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 96
    optimize the CPU graphics ratio or manually set a value for an optimal CPU graphics ratio. Use the or keys to adjust the value. The minimum value depends on the installed CPU. OC Tuner [Keep Current Settings] This item allows you to automatically overclock the CPU and DRAM frequencies
  • Asus Z97-PRO | User Guide - Page 97
    subitems in this menu allow you to set the DRAM timing control features. Use the or keys to adjust the value. To restore the default setting, type [auto] using the keyboard - [15] DRAM CAS# Write Latency [Auto] Configuration options: [Auto] [1] - [31] Chapter 3 ASUS Z97-PRO Series 3-19
  • Asus Z97-PRO | User Guide - Page 98
    Chapter 3 RTL IOL control DRAM RTL Initial Value [Auto] Configuration options: [Auto] [1] - [63] DRAM RTL (CHA_R0D0) [Auto] Configuration options: [Auto - [7] tRDRD_dr [Auto] Configuration options: [Auto] [1] - [15] tRDRD_dd [Auto] Configuration options: [Auto] [1] - [15] 3-20 Chapter 3: BIOS setup
  • Asus Z97-PRO | User Guide - Page 99
    stability. Configuration options: [Optimized (ASUS] [Default (MRC)] MCH Full Check [Auto] Enable this item to enhance the stability of your system. Disable this item to enhance the DRAM overclocking capability. Configuration options: [Auto] [Enabled] [Disabled] Chapter 3 ASUS Z97-PRO Series 3-21
  • Asus Z97-PRO | User Guide - Page 100
    to [Manual]. Fixed CPU VRM Switching Frequency (KHz) [300] This item allows you to set a higher frequency for a quicker transient response speed. Use the or to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz. Chapter 3 3-22 Chapter 3: BIOS setup
  • Asus Z97-PRO | User Guide - Page 101
    CPU power thermal range and extends the overclocking tolerance to enlarge the overclocking potential. Use the or keys to adjust the value. The values depend on the CPU installed. DO NOT remove the thermal module. The thermal conditions should be monitored. Chapter 3 ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 102
    overclocking range or a lower frequency for an enhanced system stability. Use the or to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz. DRAM Power Phase Control [Auto] [Optimized] [Extreme] Set to the ASUS to enable your core processor's speed to run
  • Asus Z97-PRO | User Guide - Page 103
    [Enabled] CPU Integrated VR Fault Management [Auto] Disable this item to prevent tripping the Fully Integrated Voltage Regulator when doing over-voltage. We recommend you to disable this item when overclocking. Configuration options: [Auto] [Disabled] [Enabled] Chapter 3 ASUS Z97-PRO Series 3-25
  • Asus Z97-PRO | User Guide - Page 104
    processor goes into low current state. Configuration options: [Auto] [Disabled] [Enabled] Idle Power-in Response [Auto] This item allows you to set set the slew rate for the Fully Integrated Voltage Regulator when it exits manual overclocking by the CPU. It response of the CPU voltage regulator during
  • Asus Z97-PRO | User Guide - Page 105
    range from 0.001V to 1.920 V with a 0.001 V interval. The following items appear only when you set the CPU Core Voltage to [Offset Mode]. Offset Mode Sign [+] [+] To offset the voltage by a positive value. [-] To offset the voltage by a negative value. Chapter 3 ASUS Z97-PRO Series 3-27
  • Asus Z97-PRO | User Guide - Page 106
    Mode] The following item appears only when you set the CPU Cache Voltage to [Manual Mode]. CPU Cache Voltage Override [Auto] This item allows you to set the CPU Cache Voltage override. By default, this item takes the standard value of the installed CPU. You can use the or keys to adjust
  • Asus Z97-PRO | User Guide - Page 107
    agent of the CPU including its PCIE controller and the PCU (power control unit). Increase the voltage to enhance the overclocking capability. You can use the or keys to adjust the value. The values range from 0.001 V to 0.999 V with a 0.001 V interval. Chapter 3 ASUS Z97-PRO Series 3-29
  • Asus Z97-PRO | User Guide - Page 108
    the processor. By default, this item takes the standard value of the installed CPU. Increase the amount of voltage to enhance the overclocking capability. You can use the or keys to adjust the value. The values range from 0.001 V to 0.999 V with a 0.001 V interval. SVID Support [Auto] Set
  • Asus Z97-PRO | User Guide - Page 109
    0125 V interval. DRAM CTRL REF Voltage [Auto] This item allows you to set the DRAM reference voltage on the control lines from the memory bus. You can use the or keys to adjust the value. The values range from 0.1 V to 1.9 V with a 0.00625 V interval. Chapter 3 ASUS Z97-PRO Series 3-31
  • Asus Z97-PRO | User Guide - Page 110
    this item to [Disabled] to enhance BCLK overclocking. Configuration options: [Auto] [Disabled] [Enabled] 3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field
  • Asus Z97-PRO | User Guide - Page 111
    in each processor package. Configuration options: [All] [1] [2] [3] Limit CPUID Maximum [Disabled] When set to [Enabled], this item allows the legacy OS to boot even without support for CPUs with extended CPUID functions. Configuration options: [Disabled] [Enabled] ASUS Z97-PRO Series 3-33
  • Asus Z97-PRO | User Guide - Page 112
    certain classes of malicious buffer overflow attacks when combined with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Configuration options: [Disabled] [Enabled] Intel Virtualization Technology [Disabled] When set to [Enabled], a VMM can utilize the additional hardware capabilities
  • Asus Z97-PRO | User Guide - Page 113
    set the duration of C7 latency for C7 state. Configuration options: [Short] [Long] Package C State Support [Auto] This item allows you to set the a C-state support for the CPU package. Configuration options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s] Chapter 3 ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 114
    Start Technology to work. Configuration options: [Enabled] [Disabled] Active Memory Threshold [0] This item supports Intel Rapid Storage Technology when the partition size is greater than the Active Page Threshold size. When set to zero (0), it will go to Auto mode and checks if the partition size
  • Asus Z97-PRO | User Guide - Page 115
    detects the connected SATA Express and M.2 devices and set a higher priority to M.2 over SATA Express interface. [SATA Express] The system assigns the priority bandwidth to SATA Express interface. [M.2] The system assigns the priority bandwidth to M.2 Socket 3. ASUS Z97-PRO Series 3-37
  • Asus Z97-PRO | User Guide - Page 116
    want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. [AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases
  • Asus Z97-PRO | User Guide - Page 117
    options: [Disabled] [Enabled] DMI Configuration This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed. DMI Gen 2 [Auto] Set this item to [Enabled] to run DMI at PCI-E 2.0 speed. Configuration options: [Enabled] [Disabled] ASUS Z97-PRO Series 3-39 Chapter 3
  • Asus Z97-PRO | User Guide - Page 118
    ] Memory Remap [Enabled] Set this item to [Enabled] to support DRAM address remapping for 64-bit operating systems. Configuration options: [Enabled] [Disabled] 3.6.5 USB Configuration The items in this menu allow you to change the USB-related features. Chapter 3 The Mass Storage Devices item
  • Asus Z97-PRO | User Guide - Page 119
    Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.2.2 Motherboard layout for the location of the USB ports. 3.6.6 Platform Misc Configuration The items in this menu allow you to configure the platform-related features. Chapter 3 ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 120
    item appears only when you set the PCI Express Native Power Management to [Enabled]. Native ASPM [Disabled] [Enabled] Windows® Vista OS controls the ASPM (active state power management) support for devices. [Disabled] BIOS controls the ASPM support for the device. PCH - PCI Express options DMI
  • Asus Z97-PRO | User Guide - Page 121
    supports. [HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97 SPDIF Out Type [SPDIF] [SPDIF] Sets to an SPDIF audio output. [HDMI] Sets to an HDMI audio output. ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 122
    Wi-Fi controller. Configuration options: [Disabled] [Enabled] ASMedia USB 3.0 Controller [Enabled] This item allows you to enable the ASMedia® USB 3.0 controller of your system. Configuration options: [Disabled] [Enabled] The following item appears only when you set the ASMedia USB 3.0 Controller
  • Asus Z97-PRO | User Guide - Page 123
    Intel LAN controllers. Configuration options: [Disabled] [Enabled] The following item appears only when you set the Intel LAN Controller to [Enabled set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)] Chapter 3 ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 124
    setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCI-E [Disabled] This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed
  • Asus Z97-PRO | User Guide - Page 125
    On their dropdown lists, select X to set up the RAID. Strip Size: [32KB] This item allows you to strip the size of your RAID setup. Configuration options: [4KB] [8KB] [16KB] [32KB] [64KB] [128KB] Capacity (MB): [0] This item allows you to set the RAID capacity. ASUS Z97-PRO Series 3-47 Chapter 3
  • Asus Z97-PRO | User Guide - Page 126
    settings. Scroll down to display the other BIOS items. Qfan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan. CPU onboard hardware monitor automatically detects and displays the CPU, motherboard, VRM, PCH Core, and SENSOR1 temperatures
  • Asus Z97-PRO | User Guide - Page 127
    to minimize the fan speed for quiet CPU fan operation. [Turbo] Set to achieve maximum CPU fan speed. [Manual] Set to assign the detailed fan speed control parameters. The following items appear only when you set the CPU Fan Profile to [Manual]. CPU Upper Temperature [70] Use the or keys
  • Asus Z97-PRO | User Guide - Page 128
    the fan speed for quiet chassis fan operation. [Turbo] Set to achieve maximum chassis fan speed. [Manual] Set to assign detailed fan speed control parameters. The following items appear only when you set the Chassis Fan Profile to [Manual]. Chassis Fan 1/4 Upper Temperature [70] Use the or
  • Asus Z97-PRO | User Guide - Page 129
    temperature. Configuration options: [Disabled] [Enabled] Anti Surge Support [Enabled] This item allows you to enable or voltage exceeds the safe range that protects the motherboard's components. Configuration options: [Disabled] [Enabled set the Fast Boot to [Enabled]. ASUS Z97-PRO Series 3-51
  • Asus Z97-PRO | User Guide - Page 130
    . All USB devices will be available during POST. This process will extend the POST time. For a faster POST time, only USB ports with keyboard and mouse connections will be detected. PS/2 Keyboard and Mouse Support [Auto] Select any of these settings when PS/2 keyboard and mouse are installed. These
  • Asus Z97-PRO | User Guide - Page 131
    ROM messages will be displayed during POST. [Disabled] Disables the ROM messages and displays only the ASUS logo during POST. Interrupt 19 Capture [Disabled] This item allows you to trap Interrupt 19 by the option ROMs. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS Z97-PRO Series
  • Asus Z97-PRO | User Guide - Page 132
    [Enabled] For better compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. [Disabled] Disables the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. The following items appear only when you set the Launch CSM
  • Asus Z97-PRO | User Guide - Page 133
    OS. Delete PK This item allows you to delete the PK from your system. Once the PK is deleted, all the system's Secure Boot keys will not be active. Configuration options: [Yes] [No] Chapter 3 ASUS Z97-PRO Series 3-55
  • Asus Z97-PRO | User Guide - Page 134
    system loaders, and UEFI drivers that you can load on the single computer. Delete the db This item allows you to delete the db file from your system. Configuration options: [Yes] [No] Load Default db This item allows you to load the downloaded db from a USB storage device. Append Default db This
  • Asus Z97-PRO | User Guide - Page 135
    allows you to load the downloaded dbx from a USB storage device. Configuration options: [Yes] [No] devices installed in the system. • To access Windows® OS in Safe Mode, press after POST (Windows® 8 not supported). • To select the boot device during system startup, press when ASUS
  • Asus Z97-PRO | User Guide - Page 136
    item allows you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.11.2 ASUS EZ Flash 2. 3-58 Chapter 3: BIOS setup Chapter 3
  • Asus Z97-PRO | User Guide - Page 137
    current BIOS settings to the BIOS Flash, and create a profile. Key in a profile number from one to eight, press , and then select Yes. Load/Save Profile from/to USB Drive This item allows you to load or save profile from your USB drive, load and save profile to your USB drive. ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 138
    3.9.3 ASUS DRAM SPD Information This item allows you to view the DRAM SPD information. Chapter 3 3-60 Chapter 3: BIOS setup
  • Asus Z97-PRO | User Guide - Page 139
    for the BIOS items, and save or discard your changes to the BIOS items. window appears. Select Yes to discard changes and exit. Launch EFI Shell from USB drives This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available USB devices. ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 140
    EZ Update: Updates the BIOS in Windows® environment. 2. ASUS EZ Flash 2: Updates the BIOS using a USB flash drive. 3. ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a USB flash drive when the BIOS file fails or gets corrupted. 4. ASUS BIOS Updater: Updates the BIOS in
  • Asus Z97-PRO | User Guide - Page 141
    USB flash disk that contains the latest BIOS, and then press . 5. Press to switch to the Folder Info field. 6. Press the Up/Down arrow keys to find the BIOS file, and then press to perform the BIOS update process. Reboot the system when the update process is done. ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 142
    for details. 3.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that
  • Asus Z97-PRO | User Guide - Page 143
    as actually shown on your computer screen. Before updating BIOS • Prepare the motherboard support DVD and a USB flash drive. • Download the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive. NTFS is not supported under DOS environment. Ensure that
  • Asus Z97-PRO | User Guide - Page 144
    the system will boot next priority device automatically. boot: 5. On the FreeDOS prompt, type d: then press to switch the disk from Drive C (optical drive) to Drive D (USB flash drive). Welcome to FreeDOS (http://www.freedos.org)! C:/> d: D:/> Updating the BIOS file To update the BIOS file
  • Asus Z97-PRO | User Guide - Page 145
    reset the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select Load Optimized Defaults item under the Exit BIOS menu. See section 3.10 Exit menu for details. Chapter 3 ASUS Z97-PRO Series 3-67
  • Asus Z97-PRO | User Guide - Page 146
    Chapter 3 3-68 Chapter 3: BIOS setup
  • Asus Z97-PRO | User Guide - Page 147
    the optical drive. 2. In the AutoPlay dialog box, click or tap Run ASSETUP.EXE. Chapter 4 If the AutoPlay dialog box does not appear, browse the contents of the support DVD and double-click or tap \\bin\ASSETUP.EXE to launch the ASUS motherboard support DVD main menu. ASUS Z97-PRO Series 4-1
  • Asus Z97-PRO | User Guide - Page 148
    AHCI driver disk. The Manual menu contains the list of supplementary user guides. Click or tap an item to open the folder of the user guide. The Utilities menu shows the applications and other software that the motherboard supports. Click or tap an item to install Click or tap to display the ASUS
  • Asus Z97-PRO | User Guide - Page 149
    in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities tab before opening the files. To read about your motherboard's utility guide: 1. Click or
  • Asus Z97-PRO | User Guide - Page 150
    AI Suite 3 Ensure that you have an Administrator account before installing AI Suite 3 in Windows® 7, Windows® 8, or Windows® 8.1 operating systems. To install AI Suite 3 on your computer: Windows® 7 OS 1. Place the Support DVD into the optical drive. 2. In the AutoPlay dialog box, click or tap Run
  • Asus Z97-PRO | User Guide - Page 151
    Windows® 8 and Windows® 8.1 OS 1. Place the Support DVD into the optical drive then follow onscreen instructions. 2. From the ASUS motherboard support DVD main menu, select the Utilities tab and click or tap AI Suite 3. 3. Follow the succeeding onscreen instructions. If the ASUS motherboard support
  • Asus Z97-PRO | User Guide - Page 152
    Processors 5 Ai Charger+ EZ Update USB BIOS Flashback USB 3.0 Boost System USB Charger+ Push Notice Information • Some functions in the AI Suite 3 main menu in this user guide may vary depending on the motherboard model. • Refer to the software manual in the support DVD or visit the ASUS
  • Asus Z97-PRO | User Guide - Page 153
    rate and specifications of your USB device. • To ensure normal charging function, disconnect and reconnect your USB device every time you enable or disable Ai Charger+. • Ai Charger+ does not support USB hubs, USB extension cables, and generic USB cables. ASUS Z97-PRO Series 4-7 Chapter 4
  • Asus Z97-PRO | User Guide - Page 154
    your USB 3.0 device to the USB 3.0 ports that support USB 3.0 Boost. Refer to section 2.3.1 Rear I/O connection of your user guide for more details. • USB 3.0 Boost automatically detects the USB 3.0 devices that support UASP. For a list of UASP-supported USB 3.0 devices, visit the ASUS website
  • Asus Z97-PRO | User Guide - Page 155
    -right corner of the AI Suite 3 main menu, Using EZ Update Click or tap to automatically update your motherboard driver, software and firmware Click or tap to search and select the BIOS file Click or tap to select a boot logo Click or tap to update the BIOS Chapter 4 ASUS Z97-PRO Series 4-9
  • Asus Z97-PRO | User Guide - Page 156
    Manually update the BIOS and selecting a boot logo Click or tap to search an image file for your boot logo Click or tap to go back to EZ Update main screen Click or tap to proceed the updating BIOS and boot logo After you click or tap BIOS Update button, click or tap Flash to update the BIOS and
  • Asus Z97-PRO | User Guide - Page 157
    Scheduling the BIOS download 1. In the Download Setting field, tick Schedule (days) then select the number of days for the BIOS download schedule. 2. Click or tap Apply to save the BIOS download schedule. Click or tap Cancel to cancel the download schedule. Chapter 4 ASUS Z97-PRO Series 4-11
  • Asus Z97-PRO | User Guide - Page 158
    latest BIOS Before you start downloading, ensure that you have installed the USB storage device to your computer's USB port that supports USB BIOS Flashback. Refer to section 2.3.1 Rear I/O connection of this user guide for more details. To download the updated BIOS: 1. From the USB BIOS Flashback
  • Asus Z97-PRO | User Guide - Page 159
    . Refer to section 2.3.1 Rear I/O connection of your user guide for more details. • The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables. • The USB Charger+ may not recognize some ASUS devices due to a special design. Chapter 4 ASUS Z97-PRO Series 4-13
  • Asus Z97-PRO | User Guide - Page 160
    detailed status of your system to your smart device. You can also send messages to your smart device using this utility. Before using this utility, ensure that you pair your computer with your smart device smart device Click or tap to discard the settings Click or tap to apply the settings You
  • Asus Z97-PRO | User Guide - Page 161
    activities of the voltage, temperature, and fan settings of your computer to your smart device. Tick to select and send alerts to your smart device Tick to select the smart device Tick to send alert when the components selected are back to its normal status Chapter 4 ASUS Z97-PRO Series 4-15
  • Asus Z97-PRO | User Guide - Page 162
    device to launch Push Notice. Push Notice Tap to view PC mode alerts Tap to view PC status alerts Tap to view PC sent messages Tap to scan more host computers Tick to select the smart device Click or tap to send your message Tap to delete PC alerts Chapter 4 4-16 Chapter 4: Software support
  • Asus Z97-PRO | User Guide - Page 163
    you get the detailed information of the motherboard, CPU, and memory settings. Launching the motherboard information Click or tap the MB tab to view the motherboard's information. Viewing the CPU information Click or tap the CPU tab to view the processor's information. Chapter 4 ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 164
    , eliminating cable connection errors, and giving users plug and play convenience. Follow the installation wizard to install the Realtek® Audio Driver from the support DVD that came with the motherboard package. If the Realtek® audio software is correctly installed, you will find the Realtek® HD
  • Asus Z97-PRO | User Guide - Page 165
    ® HD Audio Manager with DTS UltraPC II for Windows® 8.1 / Windows® 8 / Windows® 7 Configuration option tabs (vary with the audio devices connected) Advanced settings Control settings panel Set default device button Analog and digital connector status Chapter 4 ASUS Z97-PRO Series 4-19
  • Asus Z97-PRO | User Guide - Page 166
    tap on the Realtek HD Audio Manager. 2. On the pop-up window, tick the audio device that you plugged to the Line Out port then click or tap Next. a. If you select Headphone, click or tap to select the type of headphone installed then click or tap OK. b. If you select Front Speaker
  • Asus Z97-PRO | User Guide - Page 167
    5: RAID support RAID support 5 5.1 RAID configurations The motherboard supports Intel® Rapid Storage Technology with RAID 0, RAID 1, RAID 10, and RAID 5 solution. If you want to install a Windows® operating system to a hard disk drive included in a RAID set, you have to create a RAID driver disk
  • Asus Z97-PRO | User Guide - Page 168
    The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: 1. Install the SATA hard disks into the drive bays. 2. Connect the SATA signal
  • Asus Z97-PRO | User Guide - Page 169
    you to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. Chapter 5 ASUS Z97-PRO Series 5-3
  • Asus Z97-PRO | User Guide - Page 170
    When the Disks item is selected, press to select the hard disk drives you want to include in the RAID set. The SELECT DISKS screen appears: [SELECT DISKS] Port 0 1 2 3 Device Model ST3160812AS ST3160812AS ST3160812AS ST3160812AS Serial # 9LS0HJA4 9LS0F4HL 3LS0JYL8 9LS0BJ5H Size 149.0GB
  • Asus Z97-PRO | User Guide - Page 171
    drive. and a higher stripe size for multimedia computer systems used mainly for audio and video WILL BE LOST. Are you sure you want to create this volume? (Y/N) 9. Press to create the RAID volume and return to the main menu, or to go back to the CREATE VOLUME menu. Chapter 5 ASUS Z97-PRO
  • Asus Z97-PRO | User Guide - Page 172
    set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: 1. From the utility main menu, select 2. Delete RAID Volume and press . The following screen appears: Name Volume0 [DELETE VOLUME MENU] Level Drives
  • Asus Z97-PRO | User Guide - Page 173
    the RAID driver is required when installing a Windows® operating system on a hard disk drive that is included in a RAID set. 5.2.1 Creating a RAID driver disk in Windows® To create a RAID driver disk in Windows®: 1. Start Windows®. 2. Plug the USB storage device. 3. Place the motherboard support DVD
  • Asus Z97-PRO | User Guide - Page 174
    version. Click OK. 4. Follow the succeeding screen instructions to complete the installation. Before loading the RAID driver from a USB flash drive, you have to use another computer to copy the RAID driver from the support DVD to the USB flash drive. Chapter 5 5-8 Chapter 5: RAID configurations
  • Asus Z97-PRO | User Guide - Page 175
    installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation the user's authority to operate this equipment. Appendices ASUS Z97-PRO Series A-1
  • Asus Z97-PRO | User Guide - Page 176
    this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cut B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department
  • Asus Z97-PRO | User Guide - Page 177
    not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band. Exposure to Radio Frequency Energy The radiated output power of the Wi-Fi ASUS Z97-PRO Series A-3
  • Asus Z97-PRO | User Guide - Page 178
    Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le
  • Asus Z97-PRO | User Guide - Page 179
    23, D-40880 Ratingen, Germany Fax +49-2102-959911 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-1805-010923* Support Fax +49-2102-9599-11 Online support http://www.asus.com/de/support/ Appendices ASUS Z97-PRO Series A-5
  • Asus Z97-PRO | User Guide - Page 180
    )608-4555 hereby declares that the product Product Name : Motherboard Model Number : Z97-PRO(Wi-Fi ac) Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules. Operation is subject to the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
Motherboard
Z97-PRO
Series