Asus Z97I-PLUS User Guide

Asus Z97I-PLUS Manual

Get Asus Z97I-PLUS PDF manuals and user guides View all Asus Z97I-PLUS manuals
Add to My Manuals
Save this manual to your list of manuals

Asus Z97I-PLUS manual content summary:

  • Asus Z97I-PLUS | User Guide - Page 1
    Z97I-PLUS Motherboard
  • Asus Z97I-PLUS | User Guide - Page 2
    . ("ASUS"). Product warranty or service will ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS GUIDE (1) for free by downloading it from http://support.asus.com/download or (2) for the If however you encounter any problems in obtaining the full
  • Asus Z97I-PLUS | User Guide - Page 3
    Onboard LEDs 1-14 1.2.9 Internal connectors 1-15 Chapter 2: Basic installation 2.1 Building your PC system 2-1 2.1.1 Motherboard installation 2-1 2.1.2 CPU installation 2-5 2.1.3 CPU heatsink and fan assembly installation 2-6 2.1.4 DIMM installation 2-8 2.1.5 ATX Power connection
  • Asus Z97I-PLUS | User Guide - Page 4
    3-52 3.9.2 ASUS Overclocking Profile 3-52 3.9.3 ASUS SPD Information 3-53 3.10 Exit menu 3-54 3.11 Updating BIOS 3-55 3.11.1 EZ Update 3-55 3.11.2 ASUS EZ Flash 2 3-56 3.11.3 ASUS CrashFree BIOS 3 3-57 3.11.4 ASUS BIOS Updater 3-58 Chapter 4: Software support 4.1 Installing an
  • Asus Z97I-PLUS | User Guide - Page 5
    support 5.1 RAID configurations 5-1 5.1.1 RAID definitions 5-1 5.1.2 Installing Serial ATA hard disks 5-2 5.1.3 Setting the RAID item in BIOS 5-2 5.1.4 Intel® Rapid Storage Technology Option ROM utility 5-3 5.2 Creating a RAID driver disk 5-7 5.2.1 Creating a RAID driver disk without
  • Asus Z97I-PLUS | User Guide - Page 6
    signal cables from the motherboard, ensure that all service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the guides screws, and staples away from connectors, slots, sockets and circuitry. • Avoid dust, humidity, and
  • Asus Z97I-PLUS | User Guide - Page 7
    of the support DVD that comes with the motherboard package and the software. • Chapter 5: RAID support This chapter describes the RAID configurations. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The
  • Asus Z97I-PLUS | User Guide - Page 8
    guide. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions press two or more keys simultaneously, the key names are linked with a plus sign (+). viii
  • Asus Z97I-PLUS | User Guide - Page 9
    Z97I-PLUS specifications summary CPU Chipset Memory Expansion slots Graphics LGA1150 socket for the 4th Generation, New 4th Generation and 5th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3, Pentium®, and Celeron® processors Supports 22nm CPU Supports Intel® Turbo Boost Technology 2.0* * The
  • Asus Z97I-PLUS | User Guide - Page 10
    port at back I/O Intel® Z97 Express Chipset - supports ASUS USB 3.0 Boost - 6 x USB 3.0/2.0 ports (2 ports at mid-board, 4 ports at rear panel [blue]) - 6 x USB 2.0/1.1 ports (2 ports at mid-board, 4 ports at rear panel) High Performance ASUS 5X PROTECTION - ASUS motherboards safeguard your PC with
  • Asus Z97I-PLUS | User Guide - Page 11
    0.001V increment - vDRAM Bus: 124-step Memory voltage control - vPCH: 154-step Chipset voltage control SFS (Stepless Frequency Selection) - BCLK/PCIE frequency tuning from 80MHz up to 300MHz at 0.1MHz increment Overclocking Protection - ASUS C.P.R.(CPU Parameter Recall) (continued on the next page
  • Asus Z97I-PLUS | User Guide - Page 12
    supports USB BIOS Flashback) 4 x USB 2.0/1.1 ports 3 x audio jacks 1 x 19-pin USB 3.0/2.0 connector supports additional 2 USB ports 1 x USB 2.0/1.1 connector supports additional 2 USB ports 1 x M.2 Socket 3 (for M Key, type 2260/2280 devices) 4 x SATA 6.0 Gb/s connectors (gray) 1 x 4-pin CPU Fan
  • Asus Z97I-PLUS | User Guide - Page 13
    package for the following items User Guide TPM Z97I-PLUS ASUS Z97I-PLUS motherboard User guide Support DVD 4 x Serial ATA 6.0 Gb/s cables 1 x ASUS Q-Shield 1 x 2T2R dual-band Wi-Fi moving antenna (Wi-Fi 802.11a/b/g/n/ac compliant) 1 x ASUS Q-Connector 1 x 2-in-1 Wi-Fi antenna connector
  • Asus Z97I-PLUS | User Guide - Page 14
    Philips (cross) screwdriver PC chassis Power supply unit Intel® LGA1150 CPU Intel® LGA1150 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package. xiv
  • Asus Z97I-PLUS | User Guide - Page 15
    memory slots, and PCI Express 2.0/3.0 expansion slots. Intel® Z97 Express Chipset Intel® Z97 Express Chipset is a single chipset that supports the LGA1150 socket 1333 MHz Support The motherboard supports the dual-channel DDR3 memory that features Internet applications. Chapter 1 ASUS Z97I-PLUS 1-1
  • Asus Z97I-PLUS | User Guide - Page 16
    2.0. Gigabit LAN support Z97I-PLUS features Gigabit LAN design which complies with 802.3az Energy Efficient Ethernet (EEE) standard and allows a PC to serve as a network gateway for managing traffic between two separate networks. Intel® Gigabit LAN controller on this motherboard which reduces power
  • Asus Z97I-PLUS | User Guide - Page 17
    ensure memory boot compatibility, determine fail-safe settings, and dramatically improve the system's bootup. ASUS Anti-Surge This special design protects expensive devices and the motherboard from damage caused by power surges from switching power supply unit (PSU). Chapter 1 ASUS Z97I-PLUS 1-3
  • Asus Z97I-PLUS | User Guide - Page 18
    , providing you with more flexibility, convenience, and easy to navigate UEFI BIOS than the traditional BIOS versions. It offers you with dual selectable modes and native support for hard drives larger than 2.2 TB. ASUS UEFI BIOS includes the following new features: • New My Favorite function allows
  • Asus Z97I-PLUS | User Guide - Page 19
    to 4K/2K resolution visuals through a single cable. Supporting HDCP copy protection such as HD DVD and blu DVD or Blu-ray Disc™. ErP Ready The motherboard is European Union's Energy-related Products (ErP consumptions. This is in line with ASUS vision of creating environment-friendly and
  • Asus Z97I-PLUS | User Guide - Page 20
    overview 1.2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch
  • Asus Z97I-PLUS | User Guide - Page 21
    _DP ASM 1442K TPM USB7-10 Super I/O LGA1150 BATTERY 18 LAN_USB3_34 WIFI_LED BT_LED WLAN MemOK! DRAM_LED AAFP SPDIFO AUDIO Intel I218V CLRTC ALC 892 SPDIF_OUT 64Mb BIOS Intel® Z97 USB1112 PCIEX16 M.2(SOCKET3) SATA6G_4 SATA6G_3 Z97I-PLUS DDR3 DIMMA1 (64bit, 240-pin module) DDR3
  • Asus Z97I-PLUS | User Guide - Page 22
    Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1150 socket designed for the 4th Generation, New 4th Generation and 5th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3, Pentium™, and Celeron™ processors. Z97I-PLUS Z97I-PLUS CPU socket LGA1150 Chapter 1 1-8 Chapter
  • Asus Z97I-PLUS | User Guide - Page 23
    comes with the cap on the LGA1150 socket. • The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap. 1.2.4 System memory The motherboard comes with two Double Data Rate 3 (DDR3
  • Asus Z97I-PLUS | User Guide - Page 24
    system to support a full memory load (2 DIMMs) or overclocking condition. • Memory modules with memory frequency higher than 2133MHz and their corresponding timing or the loaded XMP profile is not the JEDEC memory standard. The stability and compatibility of the memory modules depend on the CPU
  • Asus Z97I-PLUS | User Guide - Page 25
    you physical injury and damage motherboard components. Z97I-PLUS TPM Slot No. Slot Description 1 PCIe 3.0 x16 slot IRQ assignments for this motherboard A B PCIe x16 shared - Intel SATA controller - - Intel LAN - - Intel xHCI - - Intel EHCI 1 - - Intel EHCI 2 shared - Wi-Fi
  • Asus Z97I-PLUS | User Guide - Page 26
    (Short) Z97I-PLUS Clear CMOS jumper To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup
  • Asus Z97I-PLUS | User Guide - Page 27
    that are not compatible with the motherboard may cause system boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press and hold the MemOK! button until the DRAM_LED starts blinking to begin automatic memory compatibility tuning for successful boot. Z97I-PLUS MemOK! button
  • Asus Z97I-PLUS | User Guide - Page 28
    motherboard booting process. If an error is found , the LED next to the error device will continue lighting until the problem is solved. This user-friendly design provides an intuitional way to locate the root problem within a second. Z97I-PLUS DRAM_LED Z97I-PLUS DRAM LED 3. Bluetooth LED and WiFi
  • Asus Z97I-PLUS | User Guide - Page 29
    hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z97 chipset. A B SATA6G_1 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND SATA6G_3 GND RSATA_TXP3 RSATA_TXN3 GND RSATA_RXN3 RSATA_RXP3 GND Z97I-PLUS
  • Asus Z97I-PLUS | User Guide - Page 30
    backward compatibility with USB 2.0. Z97I-PLUS supports up to 480 Mbps connection speed. USB+5V USB_P11USB_P11+ GND NC Z97I-PLUS Chapter 1 USB+5V USB_P12USB_P12+ GND USB1112 PIN 1 Z97I-PLUS USB2.0 connector Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard
  • Asus Z97I-PLUS | User Guide - Page 31
    GND CHA FAN PWR CHA FAN IN +5V CHA_FAN2 GND CHA FAN PWR CHA FAN IN +5V CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM Z97I-PLUS Fan connectors • DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These
  • Asus Z97I-PLUS | User Guide - Page 32
    Type item in the BIOS setup to [HD Audio] or [AC97]. 8. M.2 Socket 3 This socket allows you to install an M.2 (NGFF) module. M.2 (SOCKET3) Z97I-PLUS Z97I-PLUS M.2 socket • This socket supports M Key and type 2260/2280 storage devices. • When using Intel® Desktop Responsiveness technologies with
  • Asus Z97I-PLUS | User Guide - Page 33
    become unstable or may not boot up if the power is inadequate at http://support.asus. com/ Z97I-PLUS PIN 1 PCICLK FRAME PCIRST# LAD3 +3V LAD0 NC +3VSB GND PWRDWN GND NC LAD2 LAD1 GND NC SERIRQ CLK_RUN# NC Z97I-PLUS TPM connector The TPM module is purchased separately. Chapter 1 ASUS Z97I-PLUS
  • Asus Z97I-PLUS | User Guide - Page 34
    connector supports several chassis-mounted functions. F_PANEL GND PWR PWR_LEDPWR_LED+ (NC) HWRST# Ground HDD_LEDHDD_LED+ PIN 1 Z97I-PLUS System The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin
  • Asus Z97I-PLUS | User Guide - Page 35
    The motherboard layout may vary with models, but the installation steps are the same for all models. 1. Remove the bolt from the Wi-Fi antenna connector but leave the washer on the connector. washer 2. Insert the connector into the Q-shield's Wi-Fi port hole. washer bolt bolt Chapter 2 ASUS Z97I
  • Asus Z97I-PLUS | User Guide - Page 36
    3. Replace the bolt on the connector to secure the antenna connector and the Q-shield in place. 4. Install the ASUS Q-shield to the chassis rear I/O panel. 5. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. Chapter 2 2-2 Chapter
  • Asus Z97I-PLUS | User Guide - Page 37
    6. Place four screws into the holes indicated by circles to secure the motherboard to the chassis. Z97I-PLUS Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. ASUS Z97I-PLUS 2-3
  • Asus Z97I-PLUS | User Guide - Page 38
    7. Connect the Wi-Fi antenna cable to the Wi-Fi module properly. Chapter 2 2-4 Chapter 2: Basic installation
  • Asus Z97I-PLUS | User Guide - Page 39
    2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 socket on the LGA1150 socket. Chapter 2 ASUS Z97I-PLUS 2-5
  • Asus Z97I-PLUS | User Guide - Page 40
    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly Chapter 2 2-6 Chapter 2: Basic installation
  • Asus Z97I-PLUS | User Guide - Page 41
    To uninstall the CPU heatsink and fan assembly Chapter 2 ASUS Z97I-PLUS 2-7
  • Asus Z97I-PLUS | User Guide - Page 42
    2.1.4 DIMM installation Chapter 2 To remove a DIMM 2-8 Chapter 2: Basic installation
  • Asus Z97I-PLUS | User Guide - Page 43
    2.1.5 ATX Power connection OR OR ASUS Z97I-PLUS 2-9 Chapter 2
  • Asus Z97I-PLUS | User Guide - Page 44
    2.1.6 SATA device connection OR Chapter 2 2-10 Chapter 2: Basic installation
  • Asus Z97I-PLUS | User Guide - Page 45
    2.1.7 Front I/O Connector To install the system panel connector To install USB 2.0 connector To install front panel audio connector AAFP USB 2.0 To install USB 3.0 connector USB 3.0 Chapter 2 ASUS Z97I-PLUS 2-11
  • Asus Z97I-PLUS | User Guide - Page 46
    2.1.8 Expansion Card installation To install PCIe x16 cards Chapter 2 2-12 Chapter 2: Basic installation
  • Asus Z97I-PLUS | User Guide - Page 47
    10. Intel USB 3.0 ports 3-4, support ASUS USB 3.0 Boost. Bottom port supports USB BIOS Flashback. 11. Audio I/O ports** * and **: Refer to the tables on the next page for LAN port LEDs, and audio port definitions. ***: This port does not support an analog output via a DVI to RGB adapter. ASUS Z97I
  • Asus Z97I-PLUS | User Guide - Page 48
    BIOS, and one display under DOS. • Due to the design of Intel® 9 series chipset, all USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility 7.1-channel 2.1-channel Light Blue (Rear
  • Asus Z97I-PLUS | User Guide - Page 49
    2.2.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers Chapter 2 ASUS Z97I-PLUS 2-15
  • Asus Z97I-PLUS | User Guide - Page 50
    Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Chapter 2 Connect to 7.1 channel Speakers 2-16 Chapter 2: Basic installation
  • Asus Z97I-PLUS | User Guide - Page 51
    by four short beeps Description VGA detected Quick boot set to disabled No keyboard detected No memory detected No VGA detected Hardware component failure 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.4 Turning off the computer While
  • Asus Z97I-PLUS | User Guide - Page 52
    Chapter 2 2-18 Chapter 2: Basic installation
  • Asus Z97I-PLUS | User Guide - Page 53
    BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. When downloading or updating the BIOS file, rename it as Z97IPLUS.CAP for this motherboard. Chapter 3 ASUS Z97I-PLUS 3-1
  • Asus Z97I-PLUS | User Guide - Page 54
    system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. See section 1.2.6 Headers for information on how to erase the RTC RAM. • The BIOS setup program does not support the bluetooth devices. BIOS menu screen The BIOS Setup program
  • Asus Z97I-PLUS | User Guide - Page 55
    ) or press . The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section 3.8 Boot menu for details. Displays the CPU/motherboard temperature, CPU voltage output, CPU/chassis fan speed, and SATA information Displays the system properties of the
  • Asus Z97I-PLUS | User Guide - Page 56
    configure the BIOS settings. The Fan control MyFavorite Language Menu bar EZ Tuning Wizard Quick Note Hot Keys Chapter 3 Sub-menu item Menu items Item description Configuration fields Scroll bar Last modified settings Goes back to EZ Mode Displays the CPU/motherboard temperature, CPU and memory
  • Asus Z97I-PLUS | User Guide - Page 57
    EZ Tuning Wizard (F11) This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard's SATA mode from AHCI to RAID mode. Refer to section 3.2.4 EZ Tuning Wizard for more information. Chapter 3 ASUS Z97I-PLUS 3-5
  • Asus Z97I-PLUS | User Guide - Page 58
    to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • it and press to display a list of options. Last Modified button This button shows the items that you last modified
  • Asus Z97I-PLUS | User Guide - Page 59
    fans. Click to select a fan to be configured Click to activate PWM Mode Click to activate DC Mode Chapter 3 Select a profile to apply to your fans Click to apply the fan setting Click to undo the changes Click to go back to main menu Select to manually configure your fans ASUS Z97I-PLUS
  • Asus Z97I-PLUS | User Guide - Page 60
    Configuring fans manually Select Manual from the list of profiles to manually configure your fans' operating speed. Speed points Click or tap to manually configure your fans To configure your fans: 1. Select the fan that you want to configure and to view its current status. 2. Click and drag
  • Asus Z97I-PLUS | User Guide - Page 61
    Select the CPU fan type (Box cooler, Tower cooler, or Water cooler) that you installed then click Next. If you are not sure of the CPU fan type, click I'm not sure. The system automatically detects the CPU fan type. 4. Click Next then click Yes to confirm auto-tuning. ASUS Z97I-PLUS 3-9 Chapter
  • Asus Z97I-PLUS | User Guide - Page 62
    > on your keyboard or click EZ Tuning Wizard screen. 2. Click RAID then click Next. from the BIOS screen to open • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel® SATA connectors. 3. Select the type of storage for your RAID Easy Backup or Super Speed
  • Asus Z97I-PLUS | User Guide - Page 63
    3.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 ASUS Z97I-PLUS 3-11
  • Asus Z97I-PLUS | User Guide - Page 64
    Setup Tree Map screen. from the BIOS screen to open 2. On the Setup Tree Map screen, select the BIOS items that you want to save in the following items to My Favorite items: • User-managed items such as language and boot order • Configuration items such as system time and date. 4. Click Exit (ESC)
  • Asus Z97I-PLUS | User Guide - Page 65
    ) RAM to clear the BIOS password. See section 1.2.6 Headers for information on how to erase the RTC RAM via the Clear CMOS button. • The Administrator or User Password items on top of the screen show the default [Not Installed]. After you set a password, these items show [Installed]. ASUS Z97I-PLUS
  • Asus Z97I-PLUS | User Guide - Page 66
    that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in
  • Asus Z97I-PLUS | User Guide - Page 67
    following three items appear only when you set the Ai Overclocking Tuner to [Manual]. Filter PLL [Auto] Set this item to high BCLK (base clock) mode when using a very high BCLK to improve overclocking capability. Configuration options: [Auto] [Low BCLK mode] [High BCLK mode] ASUS Z97I-PLUS 3-15
  • Asus Z97I-PLUS | User Guide - Page 68
    CPU permanently. Initial BCLK Frequency [Auto] This item allows you to start overclocking the system from the initial BCLK (base clock) frequency to the assigned BCLK frequency. Use the or to adjust the value. The value ranges depend on the value you set on BCLK Frequency. ASUS MultiCore
  • Asus Z97I-PLUS | User Guide - Page 69
    Saving Mode [Disabled] The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best energy saving condition. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS Z97I-PLUS 3-17
  • Asus Z97I-PLUS | User Guide - Page 70
    options: [Auto] [1] - [15] DRAM CKE Minimum Pulse Width [Auto] Configuration options: [Auto] [1] - [15] DRAM CAS# Write Latency [Auto] Configuration options: [Auto] [1] - [31] Chapter 3 3-18 Chapter 3: BIOS setup
  • Asus Z97I-PLUS | User Guide - Page 71
    Timings tRDRD [Auto] Configuration options: [Auto] [1] - [7] tRDRD_dr [Auto] Configuration options: [Auto] [1] - [15] tRDRD_dd [Auto] Configuration options: [Auto] [1] - [15] tWRRD [Auto] Configuration options: [Auto] [1] - [63] Chapter 3 ASUS Z97I-PLUS 3-19
  • Asus Z97I-PLUS | User Guide - Page 72
    - [31] MISC MRC Fast Boot [Auto] This item allows you to enable, disable or automatically set the MRC fast boot. Configuration options: [Auto] [ ASUS] [Default (MRC)] MCH Full Check [Auto] Enable this item to enhance the stability of your system. Disable this item to enhance the DRAM overclocking
  • Asus Z97I-PLUS | User Guide - Page 73
    Frequency to [Manual]. Fixed CPU VRM Switching Frequency (KHz) [300] This item allows you to set a higher frequency for a quicker transient response speed. Use the or to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz. Chapter 3 ASUS Z97I-PLUS 3-21
  • Asus Z97I-PLUS | User Guide - Page 74
    simultaneously. Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%] CPU Power Thermal Control [120] A higher temperature brings a wider CPU power thermal range and extends the overclocking tolerance to enlarge the overclocking potential. Use the or keys to adjust the value. The
  • Asus Z97I-PLUS | User Guide - Page 75
    1 W to 4096 W. CPU Integrated VR Current Limit [Auto] Allows you to set a higher current limit to prevent frequency and power throttling when overclocking. Use the or keys to adjust the value. The values range from 0.125 to 1023.875 with a 0.125 interval. Chapter 3 ASUS Z97I-PLUS 3-23
  • Asus Z97I-PLUS | User Guide - Page 76
    overclocking. Configuration options: [Auto] [Disabled] [Enabled] CPU Internal Power Configuration CPU CPU is in low power state, or make the FIVR (fully integrated voltage regulator work the Fully Integrated Voltage Regulator when it enters manual override mode. Configuration options: [Auto] [Regular
  • Asus Z97I-PLUS | User Guide - Page 77
    voltage [Disabled] This item allows you to set higher voltages for overclocking. When you enable this item, you can choose a high level voltage to overclock, but does not guarantee the CPU life. Configuration options: [Enabled] [Disabled] CPU Core Voltage [Auto] This item allows you to configure the
  • Asus Z97I-PLUS | User Guide - Page 78
    Voltage [Auto] This item allows you to set the amount of voltage fed to the CPU uncores including its cache. Increase the voltage when setting a high CPU cache frequency. Configuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode] • The following item appears only when you set the
  • Asus Z97I-PLUS | User Guide - Page 79
    . [-] To offset the voltage by a negative value. CPU Graphics Voltage Offset By default, this item takes the standard value of the installed CPU. You can use the or keys to adjust the value. The values range from 0.001V to 0.999V with a 0.001V interval. Chapter 3 ASUS Z97I-PLUS 3-27
  • Asus Z97I-PLUS | User Guide - Page 80
    CPU Graphics when running in turbo mode. Increase the voltage when configuring a high CPU of the installed CPU. Increase the amount of voltage to enhance the overclocking capability. You can Support [Auto] Set this item to [Enabled] when overclocking your system. Disabling this item stops the CPU
  • Asus Z97I-PLUS | User Guide - Page 81
    Support to [Enabled]. SVID Voltage Override [Auto] This item allows you to set the SVID Voltage override. By default, this item takes the standard value of the installed CPU Intel® CPU specifications, DIMMs with voltage requirement over 1.65 V may damage the CPU the memory bus. ASUS Z97I-PLUS 3-29
  • Asus Z97I-PLUS | User Guide - Page 82
    ] for EMI reduction, or set this item to [Disabled] to enhance BCLK overclocking. Configuration options: [Auto] [Disabled] [Enabled] 3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced
  • Asus Z97I-PLUS | User Guide - Page 83
    . [Disabled] Only one thread per activated core is enabled. Active Processor Cores [All] This item allows you to select the number of CPU cores to activate in each processor package. Configuration options: [All] [1] [2] [3] For some CPU types, only [All] and [1] appear. ASUS Z97I-PLUS 3-31
  • Asus Z97I-PLUS | User Guide - Page 84
    item allows you to select the CPU performance state during system boot before the operating system takes control. The CPU runs at a selected performance ratio based on CPU configuration. Configuration options: [Max Non-Turbo Performance] [Max Battery] [Turbo Performance] Dynamic Storage Accelerator
  • Asus Z97I-PLUS | User Guide - Page 85
    set the duration of C7 latency for C7 state. Configuration options: [Short] [Long] Package C State Support [Auto] This item allows you to set the a C-state support for the CPU package. Configuration options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s] Chapter 3 ASUS Z97I-PLUS 3-33
  • Asus Z97I-PLUS | User Guide - Page 86
    automatically goes into sleep mode when the partition size is not enough for the Intel® Rapid Start Technology to work. Configuration options: [Enabled] [Disabled] Active Memory Threshold [0] This item supports Intel Rapid Storage Technology when the partition size is greater than the Active Page
  • Asus Z97I-PLUS | User Guide - Page 87
    down to display the other BIOS items. Chapter 3 SATA disk drives. The following item appears only when you set the SATA Mode Selection to [RAID]. Pcie Nand Configuration [Auto] This item allows you to enable or disable PCIe NAND. Configuration options: [Auto] [Disabled] [Enabled] ASUS Z97I-PLUS
  • Asus Z97I-PLUS | User Guide - Page 88
    warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] Hot Plug [Disabled name for the Intel® SATA ports. 3.6.4 System Agent Configuration Chapter 3 CPU Display Audio [Enabled] Enable this item to support CPU display audio output.
  • Asus Z97I-PLUS | User Guide - Page 89
    [Enabled] to support high frequency DRAMs for a better stability. Configuration options: [Enabled] [Disabled] Memory Remap [Enabled] Set this item to [Enabled] to support DRAM address remapping for 64-bit operating systems. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS Z97I-PLUS 3-37
  • Asus Z97I-PLUS | User Guide - Page 90
    Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB devices at startup. If any USB devices are detected, the legacy USB support is enabled. Intel xHCI Mode [Smart Auto] [Auto] The xHCI
  • Asus Z97I-PLUS | User Guide - Page 91
    power management) support for devices. [Disabled] BIOS controls the ASPM support for the CPU and PCH (platform controller hub) Both DMI link ASPM control items of the CPU and PCH sides must be enabled for the ASPM to take effect. Configuration options: [Disabled] [L0s] [L1] [L0sL1] ASUS Z97I-PLUS
  • Asus Z97I-PLUS | User Guide - Page 92
    PEG ASPM Support [Disabled] This item allows you to select the ASPM state for energy-saving conditions, or use the ASUS optimized energy saving profile. Configuration options: [Disabled] [ output. Depop [Enabled] Configuration options: [Disabled] [Enabled] 3-40 Chapter 3: BIOS setup Chapter 3
  • Asus Z97I-PLUS | User Guide - Page 93
    WiFi controller. Configuration options: [Disabled] [Enabled] Bluetooth Controller [Enabled] This item allows you to enable or disable the Bluetooth controller. Configuration options: [Disabled] [Enabled] Intel state where your computer has no memory state and is not doing any ASUS Z97I-PLUS 3-41
  • Asus Z97I-PLUS | User Guide - Page 94
    network stack. Configuration options: [Disable] [Enable] The following item appears only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] This item allows you to enable or disable the Ipv4/Ipv6 PXE wake event. Configuration options: [Disabled] [Enabled] 3-42 Chapter
  • Asus Z97I-PLUS | User Guide - Page 95
    type of CPU fan installed and automatically switch the control modes. [PWM mode] Enables the CPU Q-Fan control in PWM mode for 4-pin CPU fan. [DC mode] Enables the CPU Q-Fan control in DC mode for 3-pin CPU fan. [Disabled] Disables the CPU Q-Fan control feature. ASUS Z97I-PLUS 3-43 Chapter
  • Asus Z97I-PLUS | User Guide - Page 96
    parameters. The following four items appear only when you set CPU Fan Profile to [Manual]. CPU Upper Temperature [70] Use the or keys to adjust the upper limit of the CPU temperature. The values range from 25°C to 75°C. CPU Fan Max. Duty Cycle(%) [100] Use the or keys to adjust the
  • Asus Z97I-PLUS | User Guide - Page 97
    four items appear only when you set the Chassis Fan 1/2 Profile item to [Manual]. Chassis Fan 1/2 Upper Temperature [70] Use the or keys to adjust the upper limit of the CPU temperature. The values range from 40°C to 75°C. Chassis Fan 1/2 Max. Duty Cycle(%) [100] Use the or keys to
  • Asus Z97I-PLUS | User Guide - Page 98
    the other BIOS items. Fast Boot [Enabled] [Disabled] This item allows your system to go back to its normal boot speed. [Enabled] This item allows your system to accelerate the boot speed. The following items appear only when you set the Fast Boot to [Enabled]. SATA Support [All Devices
  • Asus Z97I-PLUS | User Guide - Page 99
    Driver Support [Disabled] [Disabled] [Enabled] Select to skip the network stack driver from loading during POST. Select to load the network stack driver during POST. Next Boot after AC Power Loss [Normal Boot] [Normal Boot] Returns to normal boot on the next boot Chapter 3 ASUS Z97I-PLUS 3-47
  • Asus Z97I-PLUS | User Guide - Page 100
    the ROM messages and displays only the ASUS logo during POST. Interrupt 19 Capture [Disabled compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. [Disabled] Disable the CSM to fully support the Windows® Security Update and Security Boot
  • Asus Z97I-PLUS | User Guide - Page 101
    deleted, all the system's Secure Boot keys will not be active. Load Default PK Select Yes to load the system default PK or select No to load a downloaded PK from a USB storage device. Key-exchange Key (KEK) refers to Microsoft® Secure Boot Key-Enrollment Key (KEK). Chapter 3 ASUS Z97I-PLUS 3-49
  • Asus Z97I-PLUS | User Guide - Page 102
    updated in the operating system. Load Default KEK Select Yes to load the system default KEK or select No to load a downloaded or select No to append a downloaded additional KEK from a USB storage device boot devices, drivers and applications. dbx Management The dbx (Revoked Signature database) lists
  • Asus Z97I-PLUS | User Guide - Page 103
    , press when ASUS Logo appears. Boot Override These items displays the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device. Chapter 3 ASUS Z97I-PLUS 3-51
  • Asus Z97I-PLUS | User Guide - Page 104
    details, refer to section 3.11.2 ASUS EZ Flash 2. Setup Animator [Enabled] This item allows you to enable or disable the Setup animator. Configuration options: [Disabled] [Enabled] 3.9.2 ASUS Overclocking Profile This item allows you to store or load multiple BIOS settings. Chapter 3 3-52 Chapter
  • Asus Z97I-PLUS | User Guide - Page 105
    system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version. 3.9.3 ASUS SPD Information This item allows you to view the DRAM SPD information. Chapter 3 ASUS Z97I-PLUS 3-53
  • Asus Z97I-PLUS | User Guide - Page 106
    3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select
  • Asus Z97I-PLUS | User Guide - Page 107
    of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result in the system's failure to boot. Carefully follow the instructions of this chapter to update your BIOS if necessary. Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard. The
  • Asus Z97I-PLUS | User Guide - Page 108
    you to update the BIOS without having to use a bootable floppy disk or an OS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the USB flash disk that contains the latest BIOS file to
  • Asus Z97I-PLUS | User Guide - Page 109
    you to enter BIOS Setup to recover the BIOS setting. To ensure system compatibility and stability, we recommend that you press to load default BIOS values. DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! Chapter 3 ASUS Z97I-PLUS 3-57
  • Asus Z97I-PLUS | User Guide - Page 110
    reference only and may not be exactly the same as actually shown on your computer screen. Before updating BIOS • Prepare the motherboard support DVD and a USB flash drive. • Download the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive. NTFS is not
  • Asus Z97I-PLUS | User Guide - Page 111
    switch from Files panel to Drives panel then select D:. Drives panel ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM BOARD: Z97I-PLUS VER: 0305 (H :00 B :00) DATE: 03/19/2014 PATH: C:\ Update ROM BOARD: Unknown VER: Unknown DATE: Unknown C: FORMAN~1 D: Z97IPLUS.CAP 8390656
  • Asus Z97I-PLUS | User Guide - Page 112
    or reset the system while updating the BIOS to prevent system boot failaure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See Chapter 3 of your motherboard user guide for details. Chapter
  • Asus Z97I-PLUS | User Guide - Page 113
    . 2. In the AutoPlay dialog box, click or tap Run ASSETUP.EXE. Chapter 4 If the AutoPlay dialog box does not appear, browse the contents of the support DVD and double-click or tap \\bin\ASSETUP.EXE to launch the ASUS motherboard support DVD main menu. ASUS Z97I-PLUS 4-1
  • Asus Z97I-PLUS | User Guide - Page 114
    Driver menu contains the RAID/AHCI driver disk. The Utilities menu shows the applications and other software that the motherboard supports. The Manual menu contains the list of supplementary user guides. Click or tap an item to open the folder of the user guide. Click or tap to display the ASUS
  • Asus Z97I-PLUS | User Guide - Page 115
    applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. 4.4 AI Suite 3 AI Suite 3 is an all-in-one interface that integrates several ASUS utilities and
  • Asus Z97I-PLUS | User Guide - Page 116
    DVD main menu, select the Utilities tab and click or tap AI Suite 3. 3. Follow the succeeding onscreen instructions. If the ASUS motherboard support DVD main menu did not appear, try the following: a. Go to the Start Screen then click or tap the Desktop app. b. On the lower left
  • Asus Z97I-PLUS | User Guide - Page 117
    any of the integrated ASUS utilities. Click or tap on the top-right corner of the menu to launch the menu bar. Click or tap to launch AI Suite 3 menu bar Chapter 4 The Ai Suite 3 screenshots in this section are for reference only and can vary depending on motherboard model. ASUS Z97I-PLUS 4-5
  • Asus Z97I-PLUS | User Guide - Page 118
    USB Charger+ EPU Fan Xpert 3 EZ Update USB BIOS Push Notice Version Flashback • The screenshots of AI Suite 3 in this user guide are for reference only. The actual screenshots vary with models. • Refer to the software guide in the support DVD or visit the ASUS website at www.asus.com for detailed
  • Asus Z97I-PLUS | User Guide - Page 119
    and extends the overclocking frequency range ASUS optimized phase tuning profile to increase DRAM power efficiency. • The actual performance boost may vary depending on your CPU specification. • Do not remove the thermal module. The thermal conditions must be monitored. Chapter 4 ASUS Z97I-PLUS
  • Asus Z97I-PLUS | User Guide - Page 120
    Saving mode Click to configure the settings in Away mode Enables or disables Configured Max CPU Power Tick to select a setting for Voltage Decrement Click or to adjust the Configured Max CPU Power Click to select a fan profile Tick to put the system sound on mute mode • When you enable Configured
  • Asus Z97I-PLUS | User Guide - Page 121
    made in TurboV EVO will not be saved to BIOS settings and will not be kept on the next system boot. Use the Save Profile function to save your customized overclocking settings and manually load the profile after Windows starts. Using TurboV EVO CPU Frequency Click or to adjust the BCLK Frequency
  • Asus Z97I-PLUS | User Guide - Page 122
    the iGPU Max Ratio Click to reset to default settings Tick Adaptive or Manual to select the CPU Graphics Voltage mode Click to undo all the changes Drag to adjust CPU Graphics Voltage settings Click to apply all the changes Select the function to auto-tune Click to automatically overclock and
  • Asus Z97I-PLUS | User Guide - Page 123
    rotation speed. • Fan Xpert 3 does not support 2-pin fans. If you install a 2-pin fan, it can only run at its full speed. • If the CPU or chassis fans have been changed, the Fan Auto Tuning process should be repeated. DO NOT remove your fan during the Fan Auto Tuning process. ASUS Z97I-PLUS 4-11
  • Asus Z97I-PLUS | User Guide - Page 124
    4.4.5 USB 3.0 Boost USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically speeds Turbo Mode to the USB device for a faster data transfer rate • Visit the ASUS website at www.asus.com for detailed software configuration. • Use the USB 3.0 devices for high performance
  • Asus Z97I-PLUS | User Guide - Page 125
    an image file for your boot logo Chapter 4 Click or tap to go back to EZ Update main screen Click or tap to proceed the updating BIOS and boot logo After you click or tap BIOS Update button, click or tap Flash to update the BIOS and upload the boot logo in your system. ASUS Z97I-PLUS 4-13
  • Asus Z97I-PLUS | User Guide - Page 126
    the AI Suite 3 USB BIOS Flashback is available only in selected motherboard models. Using USB BIOS Flashback Set a schedule for the BIOS Update download Click or tap to cancel the download schedule setting Click or tap to check for a new BIOS update available for download Click or tap to apply
  • Asus Z97I-PLUS | User Guide - Page 127
    Check for New BIOS Update. Wait for the system to check the latest BIOS version. 2. After the utility detects a new BIOS, click or tap from the Save to: field, select the USB flash drive, then click or tap Download. 3. After the download is complete, click or tap OK. Chapter 4 ASUS Z97I-PLUS 4-15
  • Asus Z97I-PLUS | User Guide - Page 128
    Advanced > APM > ErP Ready in the Advanced mode of the BIOS Setup program. Launching USB Charger+ To launch USB Charger+, click or guide for more details. • The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables. • The USB Charger+ may not recognize some ASUS
  • Asus Z97I-PLUS | User Guide - Page 129
    your computer that you want to pair with. To pair your computer and smart device, ensure that both are connected to the same wireless network. ASUS Z97I-PLUS 4-17 Chapter 4
  • Asus Z97I-PLUS | User Guide - Page 130
    select the smart device Setting up PC Status alerts This feature allows you to send alerts of the unusual activities of the voltage, temperature, and fan settings of your computer to your smart device. Tick to select and send alerts to your smart device Tick to select the smart device Tick
  • Asus Z97I-PLUS | User Guide - Page 131
    Tap to scan more host computers Tick to select the smart device Click or tap to send your message Tap to delete PC alerts Chapter 4 ASUS Z97I-PLUS 4-19
  • Asus Z97I-PLUS | User Guide - Page 132
    motherboard's information. Viewing the CPU information From the System Information screen, click CPU tab to view the processor's information. Viewing the SPD information From the System Information screen, click SPD tab to view the memory's information. Chapter 4 4-20 Chapter 4: Software support
  • Asus Z97I-PLUS | User Guide - Page 133
    4.4.11 Version This utility displays the version information of the utilities integrated in AI Suite 3. Launching Version To launch Version, click or tap then select Version. on the top-right corner of the AI Suite 3 main menu, Chapter 4 ASUS Z97I-PLUS 4-21
  • Asus Z97I-PLUS | User Guide - Page 134
    ) technology for all audio ports, eliminating cable connection errors, and giving users plug and play convenience. Follow the installation wizard to install the Realtek® Audio Driver from the support DVD that came with the motherboard package. If the Realtek® audio software is correctly installed
  • Asus Z97I-PLUS | User Guide - Page 135
    motherboard supports the following SATA RAID solutions: • Intel® Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support. If you want to install a Windows® operating system to a hard disk drive included in a RAID set, you have to create a RAID driver disk and load the RAID driver
  • Asus Z97I-PLUS | User Guide - Page 136
    Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: 1. Install the SATA hard disks into the drive
  • Asus Z97I-PLUS | User Guide - Page 137
    allow you to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. Chapter 5 ASUS Z97I-PLUS 5-3
  • Asus Z97I-PLUS | User Guide - Page 138
    RAID Volume and press . The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name: Volume0 RAID Level: Disks: Strip Size: Capacity: Sync: Create volume [ HELP ] Enter
  • Asus Z97I-PLUS | User Guide - Page 139
    the maximum allowed capacity. 8. When the Create Volume item is selected, press . The following warning message appears: WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): 9. Press to create the RAID volume and return to the main
  • Asus Z97I-PLUS | User Guide - Page 140
    VOLUME MENU ] Level Drives RAID0(Stripe) 2 Capacity Status Bootable 298.0GB Normal Yes [ HELP ] Deleting a volume will reset the disks to non-RAID. WARNING: ALL DISK DATA WILL BE DELETED. (This does not apply to Recovery volumes) [↑↓]-Select [ESC]-Previous Menu [DEL]-Delete Volume 2. Use
  • Asus Z97I-PLUS | User Guide - Page 141
    . 5. Save changes and exit BIOS. 6. When the Make Disk menu appears, press to create a RAID driver disk. 7. Insert a formatted floppy disk into the USB floppy disk drive, then press . 8. Follow the succeeding screen instructions to complete the process. Chapter 5 ASUS Z97I-PLUS 5-7
  • Asus Z97I-PLUS | User Guide - Page 142
    Creating a RAID driver disk in Windows® To create a RAID driver disk in Windows®: 1. Start Windows®. 2. Plug the USB floppy disk drive and insert a floppy disk. 3. Place the motherboard support DVD into the optical drive. 4. Go to the AHCI/RAID Driver tab then click Intel AHCI/RAID Driver Path to
  • Asus Z97I-PLUS | User Guide - Page 143
    frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee celles susceptibles de provoquer un fonctionnement non souhaité de l'appareil. ASUS Z97I-PLUS A-1 Appendices
  • Asus Z97I-PLUS | User Guide - Page 144
    use the equipment according to the instruction manual. KC: Korea Warning Statement REACH at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from
  • Asus Z97I-PLUS | User Guide - Page 145
    Str. 21-23, D-40880 Ratingen, Germany Fax +49-2102-959931 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-2102-5789555 Support Fax +49-2102-959911 Online support http://www.asus.com/de/support/ Appendices ASUS Z97I-PLUS A-3
  • Asus Z97I-PLUS | User Guide - Page 146
    apparatus: ASUSTeK COMPUTER INC. 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Product name : Motherboard Model name : Z97I-PLUS conform with the essential requirements of the following directives: 2004/108/EC-EMC Directive EN
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
Motherboard
Z97I-PLUS