Audiovox CE531MP Operating Instructions

MICRO MP3 / CD MUSIC SYSTEM

OPERATING INSTRUCTIONS

Printed in China

811-6938A1-010

TO PLAY MP3 (for remote only)

This set can read

MP3

.

1.

Press the

FUNCTION

button to CD.

2.

To open CD door. Place a MP3 disc in the center with the label face front. The

total albums and the total tracks appear on the display.

3.

Press the

PLAY/PAUSE

button to start play.

4.

Press the

STOP

button to stop playback.

5.

In stop mode, press

PLAY/PAUSE

button to start playback.

TO SEARCH AN ALBUM

Basically this system supports the album search mode to search an album at high-

speed.

1.

Press the

PRESET + / ALBUM +

or

PRESET – / ALBUM –

button to search a desired

album in play /stop mode.

2.

After selected a desired album, the first track of this album will be shown on the

display within two seconds.

3.

Press the

SKIP/SEARCH

/

button to search a desired track and then press

the

PLAY/PAUSE

button to play the track.

4.

During searching the album, the album number is shown on the display.

USING THE REMOTE CONTROL CORRECTLY

•

Point the Remote Control at the REMOTE SENSOR located on the unit.

• When there is a strong ambient light source, the performance of the infrared

REMOTE SENSOR may be degraded, causing unreliable operation.

•

The recommended effective distance for remote operation is about 6 meters (19

feet).

SEARCH A FILE (SONGS) BY FILE NAME

1.

Press the

MP3 MODE

button once the "

" will blink, the file name and the

number's tracks appear on the display.

2.

Press the

SKIP/SEARCH

/

buttons one by one to find the file name, the

file name will display sequence as "A,B

...........

Z, 0

..........

9".

3.

Press the

SKIP/SEARCH

/

buttons about 2 seconds, the capital letters or

the figure will blinks. If the first letter of the file name in this disc haven't the

capital letters or the figure, it will not blink.

4.

Press the

SKIP/SEARCH

/

buttons one by one to search file.

5.

Press the

PLAY/PAUSE

button to play select file.

SEARCH A FILE (SONGS) BY ALBUM

1.

Press the

MP3 MODE

button twice times, the "

" will light and ALBUM appear

on the display.

2.

Press the

SKIP/SEARCH

/

buttons one by one, to select album.

3.

Press the

SKIP/SEARCH

/

buttons about 2 seconds until "ALBUM" disappear.

4.

Press the

SKIP/SEARCH

/

buttons one by one to search file.

5.

Press the

PLAY/PAUSE

button to play select file.

1.

FM MONO / STEREO / MP3 MODE /

CD ESP ON/OFF button

2.

STANDBY/ ON button

3.

FUNCTION (CD/AUX/TUNER) button

4.

PRESET+ / ALBUM+ button

5.

STOP / BAND button

6.

TUNING /

SKIP / SEARCH button

7.

MEMORY

button

8.

PRESET– / ALBUM– button

9.

SLEEP button

10.

REPEAT button

11.

PLAY / PAUSE button

12.

TUNING /

SKIP / SEARCH button

13.

X-BASS button

14.

RANDOM button

15.

TIMER button

16.

VOLUME +\– controls

TO REPEAT THE WHOLE DISC

Press the

REPEAT

button a second

time to repeat all tracks, the repeat

all indicator will light.

REPEAT PLAY (for remote only)

This function will allow a single tracks or all the tracks on the disc to be played

repeatedly.

TO REPEAT THE SAME TRACK

Press the

REPEAT

button once during

playback, the repeat one indicator

will light.

TO CANCEL REPEAT PLAY

Press the

REPEAT

button until "

REPEAT

" indicator is switched off.

RANDOM PLAY (for remote only)

All the tracks on the disc can be played in random order.

Press the

RANDOM

button.

RANDOM

appears in the display and the disc will play automatically.

TO CANCEL RANDOM PLAY

Press the

STOP

or

RANDOM

button so that "

RANDOM

" in the display goes

out.

TO REPEAT PLAY THE ALBUM (in MP3 Mode) (for remote only)

Press the

REPEAT

button three times to repeat the album, the repeat album

indicator will light.

TO CANCEL REPEAT PLAY

Press the

REPEAT

button until "

REPEAT & ALBUM

" indicator is switched off.

This product contains a low power laser device.

WARNING:

TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT RE-

MOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS IN-

SIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash and

arrowhead within the

triangle is a warning

sign alerting you of

"dangerous voltage"

inside the product.

The exclamation point

within the triangle is a

warning sign alerting

you of important in-

structions accompany-

ing the product.

CAUTION

INVISIBLE LASER RADIATION WHEN

OPEN AND INTERLOCKS DEFEATED.

AVOID EXPOSURE TO BEAM

CLASS 1 LASER

PRODUCT

APPAREIL Á LASER

DE CLASSE 1

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

GENERAL

Power consumption:

65W

Output power:

30W x 2 (10% THD)

Power source:

AC ~120V 60 Hz (USA and Canada)

AC ~220V 50 Hz (China)

AC ~230V 50 Hz (Europe)

AC ~240V 50 Hz (Australia)

AC ~110-120V/220-240V 50/60Hz (Others)

SPECIFICATION

Specifications may be subject to change without notice.

TROUBLE SHOOTING TIPS

RADIO

Disc skips

System does not turn on

Problem

Solutions

Disc in place but unit

won't play

CD/MP3

•

Make sure AC power plug is secure in the

outlet, and outlet has power.

•

Make sure FUNCTION switch is set to CD.

•

Make sure disc label is facing up.

•

Make sure disc is clean.

• Pause mode is activated.

•

Disc may be damaged or dirty; check disc.

• Make sure the unit is on a secure spot.

Vibration or jarring can cause the disc to

skip.

Poor FM reception

Poor MW reception

•

Make sure FM antenna wire is unwound.

• Electrical interference in your home can

cause poor reception. Move the unit away

from sources of interference (especially

those with motors and transformers).

•

Set the AM/MW loop antenna to a direction

for the better reception.

1

2

3

4

5

6

7

10

11

12

13

14

15

16

8

9

TO CHANGE REMOTE BATTERY

1.

Open the battery

door.

2.

Insert one CR2025 (3V)

size battery.

ATTENTION

Take out the PVC sheet

before operating

the Remote

Control.

REMOTE CONTROL

CARE & MAINTENANCE

CLEANING CD

If the CD skips or will not play, the disc may need cleaning.

Before playing, wipe the disc from the centre out with a

cleaning cloth. After playing, store the disc in its case.

CLEANING THE UNIT

Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft

cloth.

IMPORTANT NOTICE:

•

Should the CD door be opened before the reading of the CD is completed,

a jamming noise may occur. This can be resolved by closing the CD door

and then setting the FUNCTION switch temporarily to AUX.

•

If an abnormal display indication or an operating problem occurs, disconnect

the AC power cord. Wait at least 5 seconds, then reconnect the AC power

cord.

• Before transporting the unit, remove the disc from the CD tray.

PROGRAMMING TRACKS - in the MP3 stop mode (Up to a maximum of

64 tracks)

1.

Press the

MEM

button, the ALBUM blinks on the display.

2.

Press the

SKIP/SEARCH

/

buttons to select the desired albums.

3.

Press the

MEM

button, the FILE (SONGS) blinks on the display.

4.

Press the

SKIP/SEARCH

/

buttons to select the desired files (songs).

5.

Press the

MEM

button again.

6.

Repeat alone step 2 and 5 procedure to program additional tracks. Press

PLAY/

PAUSE

button to start playback of the programmed tracks and memory

indicator will appear on display.

To check the program

While in the stop mode, press the

MEM

button. The

album , file (songs) and

program numbers will appear on the display.

Press the

MEM

button again to view the other programmed selections.

These displays do not appear during programmed play.

To play the programmed tracks

Press the

PLAY/PAUSE

button.

To stop programmed play

Press the

STOP

button, if you want to recover programmed play. You can first press

MEM

button and then press

PLAY

button again.

To clear the memory content

Press the

STOP

button and then open the CD door or press

MEM

button and

then press the

STOP

button in stop mode.

CAUTION

:

Use of any controls, adjustments, or procedures other than those speci-

fied herein may result in hazardous radiation exposure.

WARNING :

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

:

The apparatus shall not be exposed to rain, moisture, dripping or splash-

ing and the no objects filled with liquids, such as vases, shall be placed

on the apparatus.

CLASS 1 LASER PRODUCT

Should any trouble occur, disconnect the AC power cord and refer servicing to

qualified personnel.

SAFETY PRECAUTIONS

Follow the advice below for safe and appropriate operations

ON PLACEMENT

•

Do not use the unit in places which are extremely hot, cold, dusty or

humid.

• Place the unit on a flat and even surface.

• Do not restrict the air flow of the unit by placing it in a place with

poor air flow, by covering it with a cloth, or by placing it on a carpet.

•

To avoid magnetized. Do not place the unit near speaker or magnet.

• Do not place any naked flame sources, such as lighted candles, on

the apparatus.

• Do not use this unit in direct sunlight or leave the unit in a closed

automobile (or yacht, etc.) where it would be exposed to high

temperatures above 40°C.

• It also should not be placed in temperatures less than 5°C (41°F) or

greater than 35°C (95°F).

ON SAFETY

•

When connecting and disconnecting the AC cord, grip the plug and

not the cord itself. Pulling the cord may damage it and create hazard.

• When you are not going to use the unit for a long period of time,

disconnect the AC power cord.

•

When the cord is plugged in, a small amount of current continues to

flow to the unit, even when the power is turned off.

• When the AC power cord is connected, the standby indicator will

light up.

NOTES ON BATTERIES

• When discarding batteries, environmental problems must be

considered and local rules or laws governing the disposal of these

batteries must be followed strictly.

ON AC VOLTAGE

• Before use, check that the rated voltage of your unit matches your

local voltage.

FCC INFORMATION

This device complies with part 15 of FCC Rules. Operations are subject

to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesirable operations.

ON CONDENSATION

•

When left in a heated room where it is warm and damp, water droplets

or condensation may form inside the CD player.

• When there is condensation inside the unit, it may not function

normally.

•

Let it stand for 1 to 2 hours before turning the power on, or gradually

heat the room up and dry the unit before use.

VENTILATION WARNING

• Do not block the ventilation openings or holes. (If the ventilation

openings or holes are blocked by a newspaper or cloth, etc., the heat

may not be able to get out.)

RATING PLATE LOCATION

The rating plate location is on the bottom of product.

BATTERY REPLACEMENT

When battery become weak, the operating distance of the Remote Control is greatly

reduced and you will need to replace the battery.

NOTE :

If the Remote Control is not to be used for a long time, remove the battery to

avoid damage caused by battery leakage corrosion.

WARNING :

Do not dispose of batteries in fire, batteries may explode or leak.

CAUTION :

Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type.

Audiovox CE531MP Operating Instructions

Audiovox CE531MP - CE Micro System Manual

Audiovox CE531MP manual content summary: