Audiovox XMC10 Installation Guide

Audiovox XMC10 - Car Dock - XM Satellite Radio Receiver Manual

Audiovox XMC10 manual content summary:

  • Audiovox XMC10 | Installation Guide - Page 1
    Xpress® Satellite Radio Receiver XMC10 Car Cradle Installation Guide -1- Released: 9-15-05 128-7472 1 of 16
  • Audiovox XMC10 | Installation Guide - Page 2
    and Warnings 4 Contents XMC10 5 Accessory Kit 5 Installation/Wiring Precautions 6 Setting Up and Installing Your Kit 7 Interconnect Diagram 6 Using Other Manufacturer's Mounts 9 Installing the Xpress XM® Into the Cradle 9 Connection Options 10 Mounting the Vehicle Antenna 12 Warranty 15
  • Audiovox XMC10 | Installation Guide - Page 3
    you want it. XM® is America's #1 Satellite Radio provider with over 4 million customers. Your Audiovox Xpress XM® receiver must be used with an accessory kit, such as the Audiovox Home Kit, Boom Box or Vehicle Kit as required by your specific installation needs. These kits are available at retailers
  • Audiovox XMC10 | Installation Guide - Page 4
    Cautions and Warnings 1. Do not install the XMC10 car cradle in a position that hinders your view through the windshield, or obstructs viewing of the dashboard indicators and displays. 2. Do not install the unit where it may obstruct the operation or deployment of safety devices, such as airbags,
  • Audiovox XMC10 | Installation Guide - Page 5
    Contents XMC10 Install Manual (P/N 1287472) Swivel Bracket (P/N 136-4048) CLA Female Socket (P/N 154-1132) OPTIONAL Audio Cable (P/N SAT-RCA) Antenna (P/N 118-1133) 1 pc. 12 Volt-to-5 Volt DC Power Adapter (P/N 112-3456) 1 pc. 1 pc. Cradle XMC10 (P/N 136-4041) 1 pc. 1 pc. ACCESSORY KIT Alcohol
  • Audiovox XMC10 | Installation Guide - Page 6
    You can begin to enjoy XM® Satellite Radio as soon as the Xpress XM® Receiver and Vehicle Kit installation are complete. Set up your Audiovox Xpress XM® System using the following installation instructions, or enlist the help of a professional installer: 2. Installing the Cradle Mount Base Assembly
  • Audiovox XMC10 | Installation Guide - Page 7
    1. IF THE XMC10 IS INSTALLED USING THE OPTIONAL XMFM-1 FM DIRECT ADAPTER, DO NOT CONNECT AN AUDIO CABLE TO THE LINE OUT CONNECTOR OF THE CRADLE. 2. THE FM TRANSMITTER OPTION MUST BE SET TO "FM ON" IN THE XPRESS XM USER MENU. (REFER TO THE OWNER'S MANUAL, PUBLICATION NO.128-7454.) XMC10 CRADLE (LEFT
  • Audiovox XMC10 | Installation Guide - Page 8
    backing. Use appropriate sheet metal or machine screws for this purpose. g. To mount the XMC10 cradle atop the swivel bracket, line up the slot at the rear of the cradle with the bracket retainer tab, and slide the cradle down so that the slot and tab mesh together in a locked position. NOTE
  • Audiovox XMC10 | Installation Guide - Page 9
    Installing the Xpress XM® Receiver into the Cradle SCREW HOLES (2) FOR DIRECT HARD MOUNTING Install the Receiver as follows: a. After making sure the connectors and guide pin hole are properly lined up, gently lower the Xpress XM® Receiver into the cradle and press down on the Xpress XM® Receiver
  • Audiovox XMC10 | Installation Guide - Page 10
    Transmitter - When using the XMC10 cradle with the wireless FM transmitter option, the XM audio signal can be received through your vehicle radio on selectable FM frequencies using the menu options included in your Xpress Receiver. (Refer to the Receiver owner's manual.) The XM audio signal can then
  • Audiovox XMC10 | Installation Guide - Page 11
    VEHICLE RADIO ANTENNA JACK c. Low-Level Audio Output - For vehicles equipped with radio head radio or entertainment system. In this case, it is best to turn the Xpress Receiver FM modulator option off to avoid interference. OPTIONAL FM DIRECT ADAPTER XMFM-1 (PURCHASED SEPARATELY) XMC10 CRADLE
  • Audiovox XMC10 | Installation Guide - Page 12
    vehicle is equipped with a roof or trunk rack, the antenna may have to be mounted off-center on the surface. The magnet will secure the antenna in the desired position. c. Apply power to the Xpress XM system as outlined in the associated User Guide and obtain an audio output. If no audio is heard
  • Audiovox XMC10 | Installation Guide - Page 13
    method. d. After determining the optimum position, turn off Xpress XM power, disconnect the power adapter from the vehicle cigarette lighter receptacle and disconnect the antenna cable. e. Plan the routing of the antenna cable to the cradle. Make sure you avoid any obstructions that could crimp
  • Audiovox XMC10 | Installation Guide - Page 14
    Then snake the cable around the passenger compartment to the back of the XMC10 cradle. h. In SUV's, minivans, etc., route the cable into the vehicle feet or other objects. i. Plug the antenna cable into the ANT connector on the back of the cradle; then plug the cigarette lighter adapter into the
  • Audiovox XMC10 | Installation Guide - Page 15
    installation, removal or reinstallation of the product, damage to speakers, accessories, or vehicle and home electrical systems, malfunction of satellite transmissions, repeater signal or receiver AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 (1-800-645-4994) CANADA
  • Audiovox XMC10 | Installation Guide - Page 16
    © 2005 Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788 128-7472 -16- 128-7472 16 of 16
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

128-7472
1 of 16
XMC10 Car Cradle
Installation Guide
Released: 9-15-05
Xpress
®
Satellite
Radio Receiver