Avanti RA7306WT Door Reversal Instructions

Door Reversal Instruction for Model

1) Remove ( 4 ) Phillips head screws from the plastic top of the unit .

then Lift and remove the top cover .

2) Lift and Remove Top Hinge and upper door and set it aside .

3) Remove middle hinge and lower door .

4) Lay down the unit and swap the door hinge to the other side making

sure the shaft pivot is moved to the other side, then replace lower door .

5) Remove plastic plug at the middle to be able to move the center

hinge to the opposite side , then replace upper door .

6) At the top you must install the hinge to the opposite side making sure

the pivot pin is also relocated to the other side

7) You must tight all the screws firmly and adjust the door then replace

the plastic top cover

Note : Make sure to wait 12 hours before starting the unit